Everything that screws down sits flush on it , there is no recess though unfortunately.
IPV 35w and 50w box mods
- Thread starter ainako
- Start date
- th_trl_thread_readers 0
- Status
Everything that screws down sits flush on it , there is no recess though unfortunately.
ordered the 50 watt 2 days ago on ebay it shipped 2 day priority yesterday... hope it gets to me fast lol.
Yeah, it's not a Hana, but it's already spanking the pants off the dna clones at same settings.
The next preorder for the updated case might have a huge number of orders behind it... I'm not going to stop talking about it, until they get it to us..
Edit- if you're not sure about what I'm talking about, look at one of the first videos from ipioneer4u. There is a smaller mod with a soldered battery. They will be making that, with a removable 18650 also.
Last edited:
I wouldn't be interested in that , this device is the ideal size imo , i don't like devices that are ridiculously small .
This device slips into a back pocket with ease ( much less bulky than a Cana) .
I don't want to use a magnifying glass to view settings and i like the extra room to use another board which will fit if i decide to do that down the line.
Last edited:
Know exactly what you mean. I'm out of the country right now bit I'm going home in a week with my ipv v2 waiting for me. Can't wait!
Cool cool.
Although recently I've realized that with how hot my RDAs can get (borderline scorching after a nice satisfying vape sesh), having a little gap would actually be better for my mods on the long run.
But then again my OCD-ness would kill me inside.
Burping out loud using Tapatalk
Good point.
Has anyone experienced heat build up through their case?
Ipioneer4u plainly *stated* that no matter how much you vape, the internal components will not over heat.. they didn't show heat distribution from a flush atomizer.
I understand, but there's a reason I use a 4nine over any mechanical I have. 18650 in the length of my hand. I have big power capability, without looking crazy for carrying something like that to other people- that can affect the perception of my business. Hate that it's like that, but it is.
*Edited stated from displayed. That's official y'all..
Editedagain- do you know what it's like to get a tracking number that isn't anything? Weahhhh!
[emoji308][emoji307][emoji324][emoji326][emoji329][emoji333][emoji311][emoji312][emoji322][emoji326][emoji318][emoji320][emoji214][emoji33]
Last edited:
Wow, is it that small ? Sounds like a winner
Anyone seen this all mechanical box mod :
The Kato Square Box Mod will be released at the end of the July.
The pictures are not the original mod they are the cloned version of the Kato Square Box!
We are the first to provide real photos of the Kato Square Box mod. This mech mod is going to be EPIC!
Full stainless steel construction-304
High quality 1:1 clone mod
Copper and brass connectors, pins, and springs
18650 series battery (Two different mods)
Laser engraved and etched serial number and logo
Full mechanical mod
The diameter of the opening for the atomizer is 22mm
size: 83.6mmx50.3mmx22.8mm
weight:320g
Last edited:
Yep, other than my gus hybrid setup, which should've been shipped a while ago, but communication and me causing issues, the 4nine is my only authentic mod. I guess the ipv2 can be thrown into that category.
Edit- my palms seem big for my fingers, but I don't have large hands.
These are the atties in my current rotation:
R91s- The only one that has a problem is the v2 with the spring loaded center pin, the ohms wander. It works fine on my other mods after the firing once the ohms settle. They all sit flush.
Kfl v2- They all sit flush and fire.
Taifun gt- Sits flush and fires.
Squape reloaded- Sits flush and fires.
Castle rda- Does not sit flush. It doesn't sit flush on anything I own.
454 rda- Sits flush and fires.
Zenith V2- Sits flush and fires.
Magma- Sits flush and fires.
Plume Veil- Sits flush and fires.
I haven't drained the battery yet but when I do I'm going to check the voltage it quit firing at.
R91s- The only one that has a problem is the v2 with the spring loaded center pin, the ohms wander. It works fine on my other mods after the firing once the ohms settle. They all sit flush.
Kfl v2- They all sit flush and fire.
Taifun gt- Sits flush and fires.
Squape reloaded- Sits flush and fires.
Castle rda- Does not sit flush. It doesn't sit flush on anything I own.
454 rda- Sits flush and fires.
Zenith V2- Sits flush and fires.
Magma- Sits flush and fires.
Plume Veil- Sits flush and fires.
I haven't drained the battery yet but when I do I'm going to check the voltage it quit firing at.
Yep, other than my gus hybrid setup, which should've been shipped a while ago, but communication and me causing issues, the 4nine is my only authentic mod. I guess the ipv2 can be thrown into that category.
Edit- my palms seem big for my fingers, but I don't have large hands.
I think i will pick one of those up, thanks.
Mine works and everything sits flush as well EXCEPT my Kayfun dang it , thats what i really wanted it to work with lol.
This seems to be a very good quality mod though , no bugs at all that i have witnessed , chip performs fantastic and fires instantly and you can tell it's quality.
For instance , when i put some toppers on the Cana it works fine but the sound it makes is very noticeable , when i screw on the same toppers on the IPV at the same wattage and resistance it is nearly silent but emits huge clouds , this is a very very good chip folks.
Last edited:
HELL YES. I love box mods, and I've been dying for this bugger to get cloned. The original one is sick, but the price is pretty bloody ridiculous. I'm def picking one of these up if the reviews are even half decent.
Burping out loud using Tapatalk
I agree , the one thing that kept me away from mechanicals is the tube factor , never cared for it but this thing seems perfect , reminiscent of a VTR but full mechanical , awesome and around $70.00.
Nice. Kato is so sick. I have one of the early tobeco clones of the hammer. Somebody was saying meh to this mod..."just another vtr."...kind of, not really... more like a take on a non-bottom feeding reo..Kato style.
Recieved mine from elev8 today! This thing is smaller than i thought. feels great in the hand. Touch fire works good and you can disable it. The screen however looks like it will get scratched up pretty easily..
Oh and the screws came out easy. not tight at all. I didnt use the screwdriver it came with.
Oh and the screws came out easy. not tight at all. I didnt use the screwdriver it came with.
I want one of these so badly but I did read somewhere (I cannot locate the source and apologize) that some vendors received prototypes or an early release. Shame on them if they are selling them as the final product! I have a Vamo and have not tried any of these box mods yet. I don't know if I would ever need a 50w mod but the 30w ones look very desirable. I watched the other video about the HCigar 30 but that made me nervous too. Seems they have similar problems to the Cloupor and I def cant afford the Hana.
That review I linked said he got his from vapercompany. I read a lot of ppl bought from elev8 too.
re: locking the unit. Press plus and minus at same time. should read LOCK. reverse to unlock.
To lock touch fire on top: hold - button and then press thumb fire button. Use the + and fire to unlock.
Sort of surprised how many folks don't read the booklet or this thread to learn this stuff.
To lock touch fire on top: hold - button and then press thumb fire button. Use the + and fire to unlock.
Sort of surprised how many folks don't read the booklet or this thread to learn this stuff.
- Status
Similar threads
- Locked
