IPV 35w and 50w box mods

[suspectK]

I want one of these so badly but I did read somewhere (I cannot locate the source and apologize) that some vendors received prototypes or an early release. Shame on them if they are selling them as the final product! I have a Vamo and have not tried any of these box mods yet. I don't know if I would ever need a 50w mod but the 30w ones look very desirable. I watched the other video about the hcigar 30 but that made me nervous too. Seems they have similar problems to the Cloupor and I def cant afford the Hana.

I've been seeing a lot of negatives from fluid vapes...but nothing too serious. It seems like a couple of vendors requested beta versions based off your post.

 

[ant89]

I want one of these so badly but I did read somewhere (I cannot locate the source and apologize) that some vendors received prototypes or an early release. Shame on them if they are selling them as the final product! I have a Vamo and have not tried any of these box mods yet. I don't know if I would ever need a 50w mod but the 30w ones look very desirable. I watched the other video about the HCigar 30 but that made me nervous too. Seems they have similar problems to the Cloupor and I def cant afford the Hana.

Fluidvapes is the first vendor that got these in and people that ordered from them report that they cant disable the touch sensor. I dont if this is true. Its reallly easy to enable/disable it.


Fire button first and then the plus button at the same time to enable.
Fire button first and then the minus button at the same time to disable.

This works almost instant

 

[spartanstew]

re: locking the unit. Press plus and minus at same time. should read LOCK. reverse to unlock.
To lock touch fire on top: hold - button and then press thumb fire button. Use the + and fire to unlock.

Sort of surprised how many folks don't read the booklet or this thread to learn this stuff.

To whom are you responding? I'm sort of surprised how many folks don't know how to use the quote feature.

 

[Budkiss]

I was trying to be nice. I didn't want to pick on any one person.
But you on the other hand... you may be a suitable victim.

 

[NicksCloud]

Between this and the defective Seven-22 mods that are electrocuting people and causing batteries to suffer thermal runaway, I personally am going to stay away from this unit despite it being gorgeous. P4Y/GL is just giving ammunition to the anti e-cig movement with dangerous and defective products. Shame on fluid for shipping out the units that are obviously the prototype batches as well.

I tried to link the warning about the Seven-22 but the site won't let me but Google or Bing it. Plus just search YouTube for Seven-22 problems. They all start out the same.

 

[spartanstew]

I was trying to be nice. I didn't want to pick on any one person.

Nobody had asked the question (at least recently). Just trying to figure out why you just blurted out a random sentence that didn't pertain to the discussion. Tourette's?

 

[LA-Vapite]

Got mine yesterday late and been testing all morning with a VTC5



Nothing really sits flush for me even with the 510 screwed down.

Haven't gone over 30 yet,
Using a Magma at .6 is working very nice.
Using a Kafun Nano at 1.3, juice gets a bit "torchy-tasting" but still really nice
Using CLT at .4 fully open and this is really lovely - seems like the one that I will try more power on

Oh yeah

• Elev8
• Order number 5791 - ordered 7/2
• Touch disabled immediately after reading manual
• black

 

[Efektt]

Just got mine from fluid. Screws were not tight and came off easy. I can lock and unlock the touch fire button. I guess they are selling the non-beta ones now. Glad I waited a while before I ordered. So far, it is working perfect.

 

[lot17ss]

Enough. Guys. BTW. Where does it say in the manual about disabling the touch button.

 

[Efektt]

My manual says nothing about disabling the touch button.

 

[Budkiss]

manual seems to omit this (disabling the touch fire sensor).
I discovered this from an online video review.
Very cool option if to avoid a misfire (which I have done more than once).

 

[LA-Vapite]

Also,
Where does it say not to use usb pass through ?

 

[ant89]

Also,
Where does it say not to use usb pass through ?
View attachment 359677

I think it was a few pages back someone said this was not recomennded by pioneer4you. This doesnt bother me at all, i wouldnt use the passthrough anyways. Im sure everyone has more than one battery. Just keep extras charged and swap it out.

 

[Tamer El-Meehy]

Got my IPV 35 watt in , it is not as robust as the Cloupor mod , you could snap the back plate if you wanted to , very thin but it is aluminum .

Screws came out easily and went back in easy . Think i will use "peel and stick " foam on it for protection , it comes in thin sheets .

Fit's most tanks but will not accept my Kayfun , bummer.

It came with a Quality control sticker and passed inspection , it's a very nice mod but if you drop it , it could be fatal lol.

Even a J wrap will not be adequate protection if you drop it .

Thanks. But the news about Kayfuns not being accepted by it is definitely catastrophic for me. I almost use nothing but kayfuns except for late night dripping at home. Anybody had similar issues with kayfun clones?


Sent from my iPad using Tapatalk

 

[ant89]

Anyone here w/ the first batch and cant disable the touch fire, theres a fix for that.

http://www.reddit.com/r/electronic_...pv2_quick_guide_disabling_version_1_touchpad/

Does anyone know which batch numbers were part of the first batch? Mine is definately the second batch as it has the QC sticker. #L0297

http://i.imgur.com/noEG3n5l.jpg

 

[suspectK]

@ant89 you don't have any issues, do you?

 

[ant89]

@ant89 you don't have any issues, do you?

No issues so far. only been using it for a couple of hours. i was just wondering what batch numbers fall under the first batch.

 

[jluc]

I ran my ipv2 with a Sony vtc4 down till it stopped firing. The multimeter I used to checked voltage only reads to tenths and I don't know if it rounds up or down. Stopped firing at 3.3 volts, charged to 4.2. It took 2 hours and 40 minutes, which seems fast to me using a walwart that came with my tablet.

 

[suspectK]

2 hours via usb?

 

[jluc]

2 hours via usb?

Plugged it in a 4:00 and noticed the red light had dimmed to almost nothing at 6:40.