Ithaka preorders

[BennyBoy]

I would prefer the option Imeo has decided to release with it. I'd rather have the choice to use my drip tips.

 

[imeothanasis]

be sure that GG mouthpiece will work better Benny. Not only you will not have a loss of air via mouthpiece o-ring but you will be able to turn it very easy while the drip tip of your choice may slip sometimes without moving the mouthpiece to adjust liquid. You may need to change your drip tip's o-ring to make a snug fit.

 

[BennyBoy]

be sure that GG mouthpiece will work better Benny. Not only you will not have a loss of air via mouthpiece o-ring but you will be able to turn it very easy while the drip tip of your choice may slip sometimes without moving the mouthpiece to adjust liquid. You may need to change your drip tip's o-ring to make a snug fit.

lol, does this mean you are feeling more inclined to include the GG mouthpiece now

I'm not fussed, either way it will be great.

 

[imeothanasis]

Yes, after the results of the poll Benny. If most of you like the Ody's mouthpiece style I will do it like this even if it will cost me more, no problem

I was always liked the Ody's mouthpiece, thats why I made it on Ody. I just gave you the ability for your own mouthpiece on Ithaka because some friends asked for it.

 

[iAnalyst]

Yes, after the results of the poll Benny. If most of you like the Ody's mouthpiece style I will do it like this even if it will cost me more, no problem

I was always liked the Ody's mouthpiece, thats why I made it on Ody. I just gave you the ability for your own mouthpiece on Ithaka because some friends asked for it.

What A great deal, the ithaka will look damn SEXY with the Ody's mouthpiece

 

[Aron Gatt]

Still nothing on e-smokeguru.

EDIT - my mistake, it starts 7pm, not am.

looks like you don't want Ithaka moon

 

[Jagellpuff]

Yes for the GG/Ody mouthpiece!

I can't believe all that you got into this Imeo, 510 conn with air control and the GGTS hidden base threads all in one! Dual coil ready!

When it comes to most innovative, Imeo you win hands down!

Now I only wish I had the money to pre order two or three of these, but I do have enough for one!!!

 

[imeothanasis]

Thanks a lot Jag my friend

1 Ithaka is enough buddy, cheers

 

[jmarkus]

Yes, after the results of the poll Benny. If most of you like the Ody's mouthpiece style I will do it like this even if it will cost me more, no problem

I was always liked the Ody's mouthpiece, thats why I made it on Ody. I just gave you the ability for your own mouthpiece on Ithaka because some friends asked for it.

wow, imeo!!!! the people speak and you listen...i've seen you do this before and ill always be amazed everytime you do it!!

thank so much for giving us an option, letting us vote, and taking the vote seriously enough to change your plans.

 

[imeothanasis]

Thank you very much Markus.
I always feel nice when all of you see my tries to please as more of you as I can

 

[glauserjg]

so GG mouth peice will be standard?

 

[gdawg]

wow man imeo.. respect, not just a true proffessional but also a good man.

 

[urquidezj]

Yes, after the results of the poll Benny. If most of you like the Ody's mouthpiece style I will do it like this even if it will cost me more, no problem

I was always liked the Ody's mouthpiece, thats why I made it on Ody. I just gave you the ability for your own mouthpiece on Ithaka because some friends asked for it.

I doubt it will cost more imeo since you will be deleting a counter bore from the machining process, mouthpiece will just be turned drilled and chamfered as opposed to drill and bore to .341 for the universal drip tips. If anything the optional mouthpiece for it will cost more to buyers.

 

[Aron Gatt]

I doubt it will cost more imeo since you will be deleting a counter bore from the machining process, mouthpiece will just be turned drilled and chamfered as opposed to drill and bore to .341 for the universal drip tips. If anything the optional mouthpiece for it will cost more to buyers.

It will take 50 seconds less for the cnc but oddys mp will need a bit more steel

 

[urquidezj]

Your right Aron but it compensates for the extra op and tight tolerance you need for the mouthpieces. Machinist here charge on how tight you want the tolerances too not just everything else. I see it being almost the same a bit faster since you are eliminating a drill and bore bar o create the counter bore.

 

[Aron Gatt]

Your right Aron but it compensates for the extra op and tight tolerance you need for the mouthpieces. Machinist here charge on how tight you want the tolerances too not just everything else. I see it being almost the same a bit faster since you are eliminating a drill and bore bar o create the counter bore.

It will basically come down to the amount of production ... It will take and extra cutter and a few more settings yes ..but if you have more steel in the long run will cost more then setting up a run ... But I could be miscalculating and obviously it's all assumption so ... You could be right ..... But anyways it is , I do really prefare the oddy style tip ...bit it's just personal preference .

 

[Aal_]

What happened to the iatty style tip. Maybe imeo should make the 3 . I have no idea what is iatty tip is or does by the way.

 

[tutusebua]

heres the link for the result of the mouthpiece poll:

http://www.e-cigarette-forum.com/forum/gg/360450-unofficial-voting-ithakas-default-mouthpiece.html

 

[imeothanasis]

It will cost more urq. Its not the machining prosess, but the shine proccess. Cost of every piece that gets mirror shined is big and depends on the length. But a doubled length has no double cost but triple. The reason is that a long piece has to be shined very carefully to not leave stairs when you shine first the half of it and then the other half.

I doubt it will cost more imeo since you will be deleting a counter bore from the machining process, mouthpiece will just be turned drilled and chamfered as opposed to drill and bore to .341 for the universal drip tips. If anything the optional mouthpiece for it will cost more to buyers.

 

[Rajuisha]

Hey Imeo.
Mayb you should give all of us that have made nice comments about you a free Ithaka for Christmas lol
Here's my comment: excellent product, excellent communication, excellent customer service, excellent personality but best of all an amazing person
Lol