Well, yes, and the KFL is so long, that I find that with a shorter drip tip, it fits more easily in my pocket...those from kidneypuncher look nice...thanks for sharing.
Sent from my iPad
Sent from my iPad
- Status
Also, the stock tip has a very small hole, which constricts the airflow. The one(s) I use have either medium or wide open apertures for greater airflow.
I'm using the ss tip from my Fogger on my kayfun. Looks fantastic! Straight, no curve, big opening.very nice.
ImportVapor.com
ImportVapor.com
I find that the smaller diameter hole in the drip tip seems to concentrate the vapor and flavor. The attys that utilize the Venturi effect (KFL, Spheroid, Sophia, Diver, et al) all have a smaller internal orifice to accomplish this. Remember that on the KFL, the airflow will never be greater than the diameter of the chimney.
Sent from my iPad
I do think TH is slightly less with the vert coil but because I use a thick gauge and lower resistances it makes up for it. its amazing just how many set ups can be made for sure. just heard of a 4 coil (all one coil really) kind of making a circle, the center of the coils is placed over the air hole. sounds pretty cool.
Sounds like a lot of work diver…most of the differences seem so subtle amongst coil styles anyway…gonna stick with my latest, enjoy it and call it a day…lemme know how that 4 banger goes of course.
just purchased and received the dingo mod with an 18650 tube, looks real nice with the lite. to celebrate this set up am going to try this sort of round micro coil in the lite. well its not really round but does kind of make a small hole in the center. supposedly you make a small coil around the drill bit, maybe 4 wraps, after the 4 wraps you make a space then 4 more wraps, space then 4 more, and finally a space then 4 more wraps. next angle the little coils so they make, or come around in a circle. well its more like a diamond. seen it in a dripper so I may have to make it a dual coil so the wire leads can connect. anyways it sounds like some thing a little different. will take some photos and let you all know if its something that works good.
all i have to say is i have been using the kayfun on a apv, and today i went to a local BM and grabbed a magneto V2 for pretty cheap and oh my god. what a difference a mech makes. wrapped a nice 1ohm micro coil and it is literally vaping heaven. never going back to a clearo, maybe not even a apv. dont even need the kick.
Last edited:
yah to be honest I have done so many different variations on these micros and none really seem that much different to a standard micro, like you said subtle differences.
Back at this wick style, round 2. Suggestions?
-Sent from outer space using DNA20 and Kayfun Lite
Back at this wick style, round 2. Suggestions?
-Sent from outer space using DNA20 and Kayfun Lite
I have a suggestion. Enjoy it scro
Yeah buddy...nice work Skittles, way thicker vape huh...I'm sticking with it for sure, Be patient with it though....this build takes 1/2 a tank to break in, second tankful gets even better.
And one other thing, I'm sure you already caught it...I had to slightly re-jet, opened up the air screw just a bit.
And one other thing, I'm sure you already caught it...I had to slightly re-jet, opened up the air screw just a bit.
Last edited:
Back at this wick style, round 2. Suggestions?
-Sent from outer space using DNA20 and Kayfun Lite
Pick your clothes up off the floor!
I'm on the lite not the plus
Pick your clothes up off the floor!
That's not my room
-Sent from outer space using DNA20 and Kayfun Lite
Last edited:
Anyone knows who may have a nano kit in stock?.....
Sent from my KFTT using Tapatalk 2
Sent from my KFTT using Tapatalk 2
Had quite the leak going on for a while, coil might be too low. It seems to have gone away well see how the rest of the tank goes
-Sent from outer space using DNA20 and Kayfun Lite
Make sure everything is snugged up when you put it together, inside and out.
I tried this wrap-over deal as well last night, as mine needed a re-wick BADLY (went 9 full days on one cotton wick).
My coil was on at a diagonal (from over a month ago), so I pulled the new wick in, put the loop on the deck, then pulled the end up snug with the edge of the coil. Basically sandwiched it between the coil and the screw as much as I could.
This is on a Lite. It definitely tightened the draw a bit, but the vapor production is up a lot. So far, the taste is about the same as it was before. Overall, I approve.
My coil was on at a diagonal (from over a month ago), so I pulled the new wick in, put the loop on the deck, then pulled the end up snug with the edge of the coil. Basically sandwiched it between the coil and the screw as much as I could.
This is on a Lite. It definitely tightened the draw a bit, but the vapor production is up a lot. So far, the taste is about the same as it was before. Overall, I approve.
- Status
Similar threads
