- Status
During flights, store your KFL upside down to prevent leakage. See below.
From the KFL manual @ SvoeMesto Manuals
Yes, I get that, and am sure it will be helpful the the op of the thread, but see my post above. Not just looking to transport, looking to find a tank based system that I can vape while ascending/descending considerable altitudes while in a motor vehicle.
I finally had a chance to build using the Truman wick and I have to say, Very juicy vape. The draw seems tight if I take a pull without hitting the button but once I do push the button it vapes nice. Really brings out the sweetness and flavor. It does spatter more but not that big of a deal. Time to re wick the 3.1.
Just ordered one via intaste.de
Sent from my DROID RAZR using Tapatalk 4 Beta
Make sure you're at your delivery address, or else you will be a slave to Fedex. Had a few horrid experiences getting mail from intaste (3 days shipping turned to 15 when they returned to customs, then to sender then to customs.... -_-
Just put the mod/kayfun upside down in your cupholder while you drive. The air will equalize constantly. When you want a vape, pick it up and use it then put it back upside down. It doesn't have to be difficult.
Sent from my HTC One using Tapatalk
Can you vape in the airport or on a plane??
-Sent from outer space using DNA20 and Kayfun Lite
-Sent from outer space using DNA20 and Kayfun Lite
Depends on the airport, and the airline. But mostly in the states, the answer is NO to both. You can vape in a smoking area if your airport has one.
Me? I just vape in the pitiful excuse for a restroom on the plane.
I read some posts that suggest the spheroid is best for vaping while ascending/descending, lying down, hot/cold, or whatever.
For the record I vaped in the airports of St Louis, Atlanta, Dallas and Miami even with security guards and TSA around and I never was told to put it away. I made sure I wasn't in an area with a lot of people and I was not blowinh clouds at the time, just Egos with BCC tanks.
The Spheroid won't leak...I have one. And the flavor and vapor are on par with my KFL+. Great customer service as well. Domestically, you can buy from domovaporco.com. The original site is vapourart.com.
Sent from my iPad
Hey thanks so much for sharing! I'm going to check that out tonight. this would be huge for me. Nice looking out my friend.
Sent from my iPhone using Tapatalk
You're welcome. Don't be surprised if they are out of stock...they have a very strong following...oh, and BTW, they are coming out in a month or so with a 22mm version...but you have to get in line behind me
Sent from my iPad
If I were to make an 8 wrap 28g micro coil on a kick 2 set at 15 watts vs a 8 wrap 26g micro coil on a kick 2 would I get better flavor from the 26g micro coil?
How would this work because I hear a lot of people say you get better flavor from a thicker wire and some people say the vape will be the same because in the end the watts is what really determines everything?
Does anyone have any experience with this?
How would this work because I hear a lot of people say you get better flavor from a thicker wire and some people say the vape will be the same because in the end the watts is what really determines everything?
Does anyone have any experience with this?
Last edited:
I've never used 26ga but I would hear that because of the thicker wire will contact more of the wick the flavor is better. Kind of why the flavor of micro coils is preferred by many me thinks.
Not the best couple of vape days... got some new juices in yesterday.. 3 were unvapable, one was identical to something I already make and at least the other one is awesome.
My Reo shorted right before going to work this morning and the spring shrank (at least it did it before I left the house and nothing blew up) but I had to scramble to get something else to take. Now I have to send the Reo back to Rob
After a really rough 8 hours at work and 5 hours at the beauty salon.. I rushed home to find the Roller I bought didn't come and the new flavors I ordered didn't come.
BUT the kfl+ I ordered from intaste did come. I washed and brushed it in hot soapy water, threw a coil in it, primed and filled it and let it sit for a few minutes. Bleh! machine oil taste!
, It's now soaking in dawn dishwashing liquid.. I don't know if I should boil it or not. My first kfl didn't taste like this! Also the 510 connection doesn't look adjustable.
My Reo shorted right before going to work this morning and the spring shrank (at least it did it before I left the house and nothing blew up) but I had to scramble to get something else to take. Now I have to send the Reo back to Rob
After a really rough 8 hours at work and 5 hours at the beauty salon.. I rushed home to find the Roller I bought didn't come and the new flavors I ordered didn't come.
BUT the kfl+ I ordered from intaste did come. I washed and brushed it in hot soapy water, threw a coil in it, primed and filled it and let it sit for a few minutes. Bleh! machine oil taste!
Last edited:
Donnah sounds like a rough day.... I think I would boil it machine oil is not what you want to vape. I'm so happy I have 3 KFL's....love them, no problems and it just seems the kfl+ and the clones have issues....just very happy in my little KFL trio world
Not the best couple of vape days... got some new juices in yesterday.. 3 were unvapable, one was identical to something I already make and at least the other one is awesome.
My Reo shorted right before going to work this morning and the spring shrank (at least it did it before I left the house and nothing blew up) but I had to scramble to get something else to take. Now I have to send the Reo back to Rob
After a really rough 8 hours at work and 5 hours at the beauty salon.. I rushed home to find the Roller I bought didn't come and the new flavors I ordered didn't come., It's now soaking in dawn dishwashing liquid.. I don't know if I should boil it or not. My first kfl didn't taste like this! Also the 510 connection doesn't look adjustable.
I had that happen on my clone. I soaked it and scrubbed too. My guess, soak it in vodka or alcohol with the orings removed. Maybe that will help some.
And if that doesn't work...just drink the vodka!
Seriously, I have a KFL+, had it about 3 weeks or so, and I just love it! Best tasting, most consistent atty I've had. If you have any issues once you've got it cleaned up, just let us know!
Sent from my iPad
I have had the Russian 91% for some time now and picked up a KFL+ today from my local vapor store.
I do like the KFL+ but not near as much as my Russian 91%. The included drip tip with the o-ring set up just wiggles like a loose tooth in the connection for it. All 3 examples the store had did this. I don't know why they didn't put the threaded channel and adapter sleeve on this. Also the airflow control is a sick joke. On mine the draw was super tight, I had to take the airflow screw out and lost it already because it's so damn small. Turns out I ran some wire up the air channel and there was a blockage I cleared out. Now with the airflow totally open it was too light so I had to use my spare airflow screw which was a bit of a chore to get back in with that tiny screw.
I can't really adjust the airflow how I'd like because that airflow screw sticks out when loosening the draw and my tank sits totally flush on my vanilla mod, so it's either slightly too tight or take out the screw and way too light of a draw. Really a poor design IMHO. Especially with flush fitting mods being so popular.
Just to nitpick, the KFL+ cost me a good bit more than my Russian 91% but you'd never know it from the boxing and accessories! The Russian came with a slick, very well thought out box that had a much better presentation and the mini screw driver included and tons of extra parts. The KFL+ came in a simple cheap box with a baggie of one extra set of screws and o-rings.
Svoemesto is the originator of the design, but the Russian is doing in better for less money I'm sorry to say.
I do like the KFL+ but not near as much as my Russian 91%. The included drip tip with the o-ring set up just wiggles like a loose tooth in the connection for it. All 3 examples the store had did this. I don't know why they didn't put the threaded channel and adapter sleeve on this. Also the airflow control is a sick joke. On mine the draw was super tight, I had to take the airflow screw out and lost it already because it's so damn small. Turns out I ran some wire up the air channel and there was a blockage I cleared out. Now with the airflow totally open it was too light so I had to use my spare airflow screw which was a bit of a chore to get back in with that tiny screw.
I can't really adjust the airflow how I'd like because that airflow screw sticks out when loosening the draw and my tank sits totally flush on my vanilla mod, so it's either slightly too tight or take out the screw and way too light of a draw. Really a poor design IMHO. Especially with flush fitting mods being so popular.
Just to nitpick, the KFL+ cost me a good bit more than my Russian 91% but you'd never know it from the boxing and accessories! The Russian came with a slick, very well thought out box that had a much better presentation and the mini screw driver included and tons of extra parts. The KFL+ came in a simple cheap box with a baggie of one extra set of screws and o-rings.
Svoemesto is the originator of the design, but the Russian is doing in better for less money I'm sorry to say.
- Status
Similar threads
