Status
Not open for further replies.

ColoradoVapz

Senior Member
ECF Veteran
Verified Member
Feb 10, 2014
265
389
Denver, CO

I'm curious as to what's up with this too. I wouldn't think VapeRev would start to put their own logo thingy on the bottom and distribute them to b&m's. But...either way....you paid 100 and he kept your stainless tank and he made you think you could only pick one or the other. That's BS. Plain and simple. Plus he didn't include your oring and screw. I would take it back, that's not a friend.
 
Last edited:

Fir3b1rd

Moved On
ECF Veteran
Mar 27, 2014
5,961
8,046
48
There is no comparison between a kayfun and aero tank period. If your aero tank is producing better flavor then a kayfun, you shouldn't be doing Rebuildables imo. I know it takes a little time to get the kayfun just right but when you do, it is far superior in every way. My wife has the aero tank, so I know exactly how it performs and it cannot compete with a properly set up kayfun. So if you are comparing these to each other, then either keep at the kayfun build until you get better, or sell. Still eating popcorn?

Yup; good buttery popcorn with a coors lt.
ECF is very proud of me for NOT saying anything.
I am enjoying the show; however.
 

Fir3b1rd

Moved On
ECF Veteran
Mar 27, 2014
5,961
8,046
48
KFL+ v2

ynyze3yd.jpg


Tapatalked from my LG-G2

Roger roger, that's it, no use flag and same
Logo.
Having both authentic, and clones and one that is an altered clone- not sure what to call the black edition. I'm ok with the sake of clones; so Long as they are sold as such. The problem is when people go looking for a deal and buy from a non-licensed dealer. Every piece of my authentic gear is unquestionable as it all ex from lic dealers. And when I buy cheap stuff it's usually; because I want to try something out before buying authentic or it's a temporary it for limited use.
 

vapdivrr

Vaping Master
ECF Veteran
Verified Member
Jul 8, 2012
9,966
19,933
61
sarasota,fl
Is this the kayfun in question? Imo, it doesn't look real. I have 4 kayfuns, 2 lites and 2 lite pluses and none look like that. Even the sveumesto logo looks different. The my last kayfun was bought about 3 to 4 months ago, so maybe it's possible they have changed since then?
 

Fir3b1rd

Moved On
ECF Veteran
Mar 27, 2014
5,961
8,046
48
Is this the kayfun in question? Imo, it doesn't look real. I have 4 kayfuns, 2 lites and 2 lite pluses and none look like that. Even the sveumesto logo looks different. The my last kayfun was bought about 3 to 4 months ago, so maybe it's possible they have changed since then?

I thought the logo was something like VRI- looked it up- vape rail international ????

The logo looks like something from fast tech
Wonder if that's from infinity? Haven't seen those yet but someone said they were as good as ehpro.
 

vapdivrr

Vaping Master
ECF Veteran
Verified Member
Jul 8, 2012
9,966
19,933
61
sarasota,fl
KFL+ v2

ynyze3yd.jpg


Tapatalked from my LG-G2
Maybe there is an updated version since I bought mine because even this doesn't look like mine. come to think of it, my latest is a lite plus, so is that different to a v2 as stated by above? My plus looks the same but the words, designed in Russia and made in Germany are not written continues across. Mine says, (designed) on top, then underneath that it says (in Russia). On the opposite side, it says (made in) on top and below that says (Germany).
 

Bronze

ECF Guru
ECF Veteran
Verified Member
Aug 19, 2012
40,240
188,000
Maybe there is an updated version since I bought mine because even this doesn't look like mine. come to think of it, my latest is a lite plus, so is that different to a v2 as stated by above? My plus looks the same but the words, designed in Russia and made in Germany are not written continues across. Mine says, (designed) on top, then underneath that it says (in Russia). On the opposite side, it says (made in) on top and below that says (Germany).

Q is the forensics guy. Maybe we need him to get on this case. :)
 

MwSlim

Slumerican
Supporting Member
ECF Veteran
Verified Member
Feb 7, 2013
2,135
11,100
Livonia, MI
Maybe there is an updated version since I bought mine because even this doesn't look like mine. come to think of it, my latest is a lite plus, so is that different to a v2 as stated by above? My plus looks the same but the words, designed in Russia and made in Germany are not written continues across. Mine says, (designed) on top, then underneath that it says (in Russia). On the opposite side, it says (made in) on top and below that says (Germany).
heres my lite plus v1

behu3eve.jpg


Tapatalked from my LG-G2
 

qorax

ECF Guru
ECF Veteran
Verified Member
Mar 6, 2013
12,652
41,477
Brampton, Canada
www.facebook.com
Maybe there is an updated version since I bought mine because even this doesn't look like mine. come to think of it, my latest is a lite plus, so is that different to a v2 as stated by above? My plus looks the same but the words, designed in Russia and made in Germany are not written continues across. Mine says, (designed) on top, then underneath that it says (in Russia). On the opposite side, it says (made in) on top and below that says (Germany).

+V2s look like that Vap. The ones with a newer drip tip and deeper fill-hole.

Poke: General-B ;)
 

Fir3b1rd

Moved On
ECF Veteran
Mar 27, 2014
5,961
8,046
48
^That's how my KFL+ v2 looks like. Which is purchased just a week back from InTaste.

Kayfun Lite plus - InTaste

Not at home where the authentic is but kid looked at the ehoro v2- same logo as authentic same
Bottoms as authentic only
It says 2014/03.
So I'm wondering if that last number change is something the cloners are changing

Ehpro v2
e8u8u8eh.jpg

3y7a2ese.jpg
 
Last edited:

vapdivrr

Vaping Master
ECF Veteran
Verified Member
Jul 8, 2012
9,966
19,933
61
sarasota,fl
+V2s look like that Vap. The ones with a newer drip tip and deeper fill-hole.

Poke: General-B ;)
That's right, I now remember something about a different drip tip on the latest versions which I don't have. So there is a kayfun version I don't have? I might have to buy another.
 
Status
Not open for further replies.

Users who are viewing this thread