You should blow out your atimozer, with your mouth every other night or so and let it drip out, it will last longer. And yes, it does ROCK!
Last edited:
Merged old sticky threads (5)
- Thread starter Busaholic
- Start date
- th_trl_thread_readers 0
- Status
You should blow out your atimozer, with your mouth every other night or so and let it drip out, it will last longer. And yes, it does ROCK!
Last edited:
Why can't I just buy a similar cable, but longer, Instead of a USB extension ?
Last edited:
A p.s. to my earlier post. I should mention that the spare attys I have (bought from BestECig) are the unpainted brushed-aluminum kind, maybe that's why they fit okay. Also, the thing I said about it going off when you lay it flat on a table & push? I want to stress that it's not something I'm worried about. It takes a *purposeful* push to get it to go off. The button is raised a teeny bit (on mine) but the clicking action is very uhh... clicky. heheh. I mean, it won't just go off if you lightly touch it. I'm never going to keep it sandwiched between two hard surfaces, and I'm not worried about it going off in my pocket or in the case. I think the SD is a lot more likely to get triggered accidentally, and even that has never happened to me.
Well you better keep screwing things up then because I am starting to run out of things to ..... about. I stop .....ing and your forum gets boring again.
Being the masochist that I am, I went ahead and placed an order for some of your ......edly overprices KBC atomizers today. I see they are already shipped. You think kissing up to me with good service and reasonable answers will change my attitude?
OK well it will but that's not the point because I am SURE you will trip again and rest assured I will be there to point and laugh when it does happen.
So when is the new website going to be up?
DW
OH for christ sake, is nothing sacred to you people? Fixing the shipping information on the Dura-C page was below the belt. You really are trying to take away everything I can ..... about.
Last edited:
I don't know what I did, but the vapor on my JS is starting to get very wimpy. The lung hit is also starting to disappear, but I attribute that to the decrease in the volume of vapor.
I didn't do anything wrong. I let my atomizer drip out the first night, like I've always done with my penstyle atomizers. Just to make sure, I tried my trusty Puresmoker penstyle. Plumes of vapor and enough lung hit to make me cough. This is with the same liquid, JC Sweet Strawberry 11mg. I'm not sure what's going on, but this KB atomizer is starting to scare me, since my last M401 atomizer just died yesterday. So the JS is officially my primary vape out of necessity. I'm going to order some Be112's and hope they get here before this KB atomizer dies on me. I had a stock of Puresmoker penstyle atomizers and thought I was ready. Buuuut, they don't fit. So I guess it serves me right for not ordering a spare Janty atomizer when I purchased my JS.
JS is still an amazing device. I just didn't expect my atomizer to start getting wimpy on me within 24 hours.
Chris
I didn't do anything wrong. I let my atomizer drip out the first night, like I've always done with my penstyle atomizers. Just to make sure, I tried my trusty Puresmoker penstyle. Plumes of vapor and enough lung hit to make me cough. This is with the same liquid, JC Sweet Strawberry 11mg. I'm not sure what's going on, but this KB atomizer is starting to scare me, since my last M401 atomizer just died yesterday. So the JS is officially my primary vape out of necessity. I'm going to order some Be112's and hope they get here before this KB atomizer dies on me. I had a stock of Puresmoker penstyle atomizers and thought I was ready. Buuuut, they don't fit. So I guess it serves me right for not ordering a spare Janty atomizer when I purchased my JS.
JS is still an amazing device. I just didn't expect my atomizer to start getting wimpy on me within 24 hours.
Chris
Last edited:
I just had a stick atomizer die on me after one days use. Luckily I had some spare BE112s. 
I just had a stick atomizer die on me after one days use. Luckily I had some spare BE112s.
Unfortunately, I don't feel like paying the $18.80 for shipping from bestecigs. Just ordered 2 penstyle atomizers from ecigmall.com. If it doesn't fit, I'll just sand it down.
It's so weird to have this atomizer start dying so soon though. I'm a fairly light-moderate vaper. Normally my atty's last me over a month
-chris-
Folks here are speaking in glowing terms about the JS, and I suppose I'll see, I have a couple on order since may 20. I like the form factor. I don't see, though, how it could be any better than an ordinary 801 with a USB passthrough- It's just a different way of laying out the battery. Handy? Yah.. Cool? Yah. Since the atomizer is an 801, I don't see how it would "drain the carts" any differently than any other power supply.
I don't have a first hand experience, I just am a bit incredulous at the glow- I suppose I'll see. Seems though, the J-Stick is just a batt for an 801 atomizer.
Steve
I don't have a first hand experience, I just am a bit incredulous at the glow- I suppose I'll see. Seems though, the J-Stick is just a batt for an 801 atomizer.
Steve
This posted by Ludo on 5/30.
"We are shipping plenty of sticks tonight, so Tuesday JANTY USA and JANTY EUROPE should have plenty available. 1000 more are being produced and these will be sent by Thursday to JANTY USA and JANTY EUROPE."
"We are shipping plenty of sticks tonight, so Tuesday JANTY USA and JANTY EUROPE should have plenty available. 1000 more are being produced and these will be sent by Thursday to JANTY USA and JANTY EUROPE."
'Grats on getting the stick FINALLY in your hands.....I think you're going to be pleasantly surprised....
Hooray Elendil! Finally, you can be at peace... What are your thoughts so far? I am very curious....
As with anything new, there is always the excitement factor to consider. I will post some more comprehensive thought by tomorrow after I have had at least 24 hours with it................
Last edited:
I am so so sorry to have to complain about the JS, when I got mine so quickly compared to others. I truly am. I know you are pulling your hair out trying to deal with the impatient and sometimes nasty people wanting theirs. But its broken. I was shocked when it was in my po box today. I really didnt expect it to come that fast after reading the forum. This is what is going on with my JS:
1) I put in the battery, then screwed the atty in and it instantly started to crackle and pop and got sooo soo hot you could hardly touch the end. I hit on it a few times (not needing to push the button) but had to unscrew it to turn it off because it is always on. I figured I could use it for now by just unscrewing it when I was done hitting it, and wait until you got caught up on your orders before returning it. There are no led lights at all. No 11 second cut off either.
2)I didnt get the xtra batterys I ordered with it or a wall/car charger.
Tell me what to do Janty staff and/or Moderater:
Should I wait until you get more in? Should I wait until you get all your pre-orders done and then send it back? I dont mind waiting untill the pre order people are taken care of, just as long as I get what I paid for working correctly. I am sure you guys will take care of it eventually and I am ok waiting if someone will just tell me thats what we need to do. I wouldnt want your jobs for sure!!
1) I put in the battery, then screwed the atty in and it instantly started to crackle and pop and got sooo soo hot you could hardly touch the end. I hit on it a few times (not needing to push the button) but had to unscrew it to turn it off because it is always on. I figured I could use it for now by just unscrewing it when I was done hitting it, and wait until you got caught up on your orders before returning it. There are no led lights at all. No 11 second cut off either.
2)I didnt get the xtra batterys I ordered with it or a wall/car charger.
Tell me what to do Janty staff and/or Moderater:
Should I wait until you get more in? Should I wait until you get all your pre-orders done and then send it back? I dont mind waiting untill the pre order people are taken care of, just as long as I get what I paid for working correctly. I am sure you guys will take care of it eventually and I am ok waiting if someone will just tell me thats what we need to do. I wouldnt want your jobs for sure!!
- Status
Similar threads
