What would you like to see on the JSV2?

  • Metal/Aluminum Body

  • Fix Leaking Issues

  • Fix Switch Problems

  • Fix Atomizer Issues(Fitting)

  • Better Battery Cover

  • Available in More Colors

  • More Adapters for other Atomizers

  • Longer USB Cord

  • Better Price(Please!)

  • All of the Above!


Results are only viewable after voting.
Status
Not open for further replies.

Toby

Unregistered Supplier
ECF Veteran
Dec 10, 2008
1,009
233
York UK
www.ivapour.co.uk
I haven't actually mentioned this before because I presumed this is what/how every user uses e-cigs.

But when I get that slightly rank taste and less vapour, I top up the cart or drip onto atomiser, depending on the device I am using. But I notice that change in taste, rather than a lessening of vapour, that indicates to me to refill.

Occasionally, an atomiser can develop a bad taste overall over time, but the only other bad taste I've heard of at the beginning is the vapourising off of the atomiser 'gunk' that the atomisers get shipped with.

But FormulaW66 - thank goodness you didn't put any drops in the battery compartment, otherwise you would have had to send it to the Druid for some TLC!

And you don't have to wait 10 mins or owt after you refill, use straight away and enjoy! But congratulations in general - when you've got it sussed I doubt you will even think about having those 2-3 analogs you're still using, and you can start to breathe again!

All the best,
Toby
 

Toby

Unregistered Supplier
ECF Veteran
Dec 10, 2008
1,009
233
York UK
www.ivapour.co.uk
When I said don't wait 10 mins or owt Skyward, I was referring to this -
This morning put in 4 drops into attomizer through the cart end (is that where its suppost to go?) put a brand new cart, waited about 10 min then puffed on it for 3 second and got yucky burnt taste.

And do you know, I'm not too sure there is an official way of using the buttons? (Even though I sell the things!!) We just assume you press the button as you inhale on whatever device Stick, Dura, or KBC, and let go when you stop inhaling... listen to the little *hiss*... and enjoy!
 

Toby

Unregistered Supplier
ECF Veteran
Dec 10, 2008
1,009
233
York UK
www.ivapour.co.uk
Hey Ludo - a belated Happy Birthday!!! :pop: :thumb:

Can I make you feel really good by saying that your KBC saved my life and I couldn't believe how good it really is, and it is absolutely fantastic!!! It is the reason I knew I had to sell Janty and give the same opportunity for others to enjoy the delights of your brand. :thumbs:

And so also thank you that I've been able to help out with other people's quality of life by supplying everyone with the KBC, Stick, Dura and don't forget the cute little Fogger. ;)

It must feel great knowing that so many people love Janty!
(hey, and even DumWaldo too ...lol...) 8-o

Oh, and Druid says many happy returns as well, and has asked me to mention to you that poorly Sticks or any other Janty devices that are not needed are welcome to be sent to him. He is thinking of opening a "I will gladly have and make use of any e-cig devices or liquid that you might not want" charity.
:D>...lol...<:D

All the best, :)
Toby
 
Last edited:

CatVTTV

Ultra Member
ECF Veteran
Verified Member
Mar 26, 2009
1,883
35
Tyne & Wear, UK
www.cpnewcastle.co.uk
Yes Happy Belated Birthday Ludo...

From all the Gang at the Janty Club..:)

We are looking for donations to buy you one of these for your next birthday

article-1034026-01e865af00000578-541_468x409_popup.jpg



errr.... the deckchair...not the female !....:D:D
 

tmbrown327

Super Member
ECF Veteran
Mar 27, 2009
836
7
RI
I still have a functioning (no problems) V1 that was sent as a replacement for a faulty V1 way early in the release of the product. I've been very careful to avoid leakage on this device, and I'm thinking that leaking and switch problems go hand-in-hand. If it leaks, it may get into the switch, which both loosens the bond to the stick, and may actually corrode or otherwise impair the electrical contacts inside the on/off switch. OR, I may be completely wrong. :) 50/50 shot at least.
 
But FormulaW66 - thank goodness you didn't put any drops in the battery compartment, otherwise you would have had to send it to the Druid for some TLC!

Toby

I wasnt going to drop in to the Stick itself i was talking about the Hole on the battery side of the atomizer. I saw that on one of the videos here.

Thanks for the help everyone but now got a worse problem the button is sticking. guess im going to warranty it. :(
 

Kate51

Vaping Master
ECF Veteran
Mar 27, 2009
3,031
22
78
Argyle Wi USA
Check the wick in the cart, you may have a wick that is a little too dense, and won't let enough juice flow through to keep the atty happy. This happened to me just yesterday, so I pulled it out and just took a little bit of the "wool" off (make sure to trim away any "fringes") Also make sure to look at the mesh in the atomizer, there may be a strand or two on the wool embedded on that, also. Very carefully with a thin tweezer pull it off if you see some. The cartridge here is key, long as you have heat. Good luck! I keep a little pen-light so can see down in there properly.
Just an added thought, don't "twist" the cart into place, when you do that the bridge in the atty will push the cart filler away from it, and it also can imbed fibers onto the mesh by the twising motion. Straight in, pull straight out.
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread