Mesh RDAs

[ducasse]

Hi,

I've been curious about trying out a mesh rda, and the most available here are the Profiles. Can anyone give me a rundown of the differences between the original and the 1.5, and which one to go for? From what I can tell the main difference is the size of the mesh, is that all?

 

[Seiggy]

Can anyone give me a rundown of the differences between the original and the 1.5, and which one to go for? From what I can tell the main difference is the size of the mesh, is that all?

I can not speak to the original since I only have the 1.5's. But I think the only real difference between the two is the spring wick pressure plate. On the original it is smooth and on the 1.5 it's got grooves for liquid to travel in. As for mesh size I think they are both identical, 17*8.5 mm.

 

[ducasse]

I can not speak to the original since I only have the 1.5's. But I think the only real difference between the two is the spring wick pressure plate. On the original it is smooth and on the 1.5 it's got grooves for liquid to travel in. As for mesh size I think they are both identical, 17*8.5 mm.

I'm pretty sure you can use the mesh for the original in the 1.5, but not vice versa. I believe the mesh in the original is 16x6.5 mm. From what I understand there are also differences in the airflow.

I'm currently hovering over the 'buy' button on the original, since it has been harder to find and I finally tracked one down. Only question now is whether to get the Wotofo mesh or the ORFR Nexmesh.

Any thoughts?

 

[Spydro]

Have no idea about the Profile 1.5 @ducasse. But I do have 10 original Profile Mesh rda's and 6 of their Profile Unity Mesh RTA's. I used both the Wotofo KA1 mesh 0.18 ohm on mech mods and the ORFR nexMesh 0.13 ohm on regulated mods with equal results. I also made my own from SS mesh I had left over from the genesis mod days. Of the 29 mesh atty's I acquired the 10 Profiles did the best job for me with Vapefly Firebolt cotton, followed by the 10 Digiflavor Mesh Pro RDA's. My 3 Vandy Vape Mesh RDA's saw very little use.

 

[ducasse]

Have no idea about the Profile 1.5 @ducasse. But I do have 10 original Profile Mesh RDA's and 6 of their Profile Unity Mesh RTA's. I used both the Wotofo KA1 mesh 0.18 ohm on mech mods and the ORFR nexMesh 0.13 ohm on regulated mods equal results. I also made my own from SS mesh I had left over from the genesis mod days. Of the 29 mesh atty's I acquired the 10 Profiles did the best job for me with Vapefly Firebolt cotton, followed by the 10 Digiflavor Mesh Pro RDA's. My 3 Vandy Vape Mesh RDA's saw very little use.

That is very helpful, thank you. Guess I'll buy one and try it out, I'll primarily be running it on a regulated mod I think.

 

[Spydro]

That is very helpful, thank you. Guess I'll buy one and try it out, I'll primarily be running it on a regulated mod I think.

Happy it helped some @ducasse.
The Profiles work well on just about any mod. A couple of old pictures I took that I found with one on a regulated and one on a dual battery mech squonk mod. I used them on many other mech's and regulated/TC mods though.

My favorite combo with them was on the Reo 67 mech's though. But then I'm more into mechs, and with 37 of them the Reo's ruled the roost around here the longest.

 

[Seiggy]

Only question now is whether to get the Wotofo mesh or the ORFR Nexmesh.

Any thoughts?

Since I use TC, I've gone with the SS Nexmesh .15 ohm. I also use VandyVape mesh wire SS 150mesh .9 ohm / ft. When cut to size I get between .15 & .18 ohm.

 

[ducasse]

Happy it helped some @ducasse.
The Profiles work well on just about any mod. A couple of old pictures I took that I found with one on a regulated and one on a dual battery mech squonk mod. I used them on many other mech's and regulated/TC mods though.

View attachment 938913View attachment 938919

My favorite combo with them was on the Reo 67 mech's though. But then I'm more into mechs, and with 37 of them the Reo's ruled the roost around here the longest.

View attachment 938921

The Pico Squeeze 2 is probably the mod I'll run it on, might try it on a mech if I feel like it.

 

[ducasse]

Since I use TC, I've gone with the SS Nexmesh .15 ohm. I also use VandyVape mesh wire SS 150mesh .9 ohm / ft. When cut to size I get between .15 & .18 ohm.

Looks like they only have the .13, which I believe is kanthal. I haven't found spools yet, but know I've seen them.

 

[Spydro]

Looks like they only have the .13, which I believe is kanthal. I haven't found spools yet, but know I've seen them.

Lots of online companies still stock/sell the Vandy Vape mesh wire spools, and seem to have many different ones to choose from. A simple Google search will bring them up. Being in Scandinavia might be a shipping problem, but it still might be worth while checking them out.

 

[Seiggy]

The Pico Squeeze 2 is probably the mod I'll run it on, might try it on a mech if I feel like it.

I like the Squeeze 2 also. I'm running three of them, two Profile 1.5's and one Profile RDTA in RDA squonk mode. Also have a Profile 1.5 sitting on a VandyVape Pulse II. I've switched all my Squeeze 2's over to AF for better TC. I'm a happy camper...

 

[ducasse]

Lots of online companies still stock/sell the Vandy Vape mesh wire spools, and seem to have many different ones to choose from. A simple Google search will bring them up. Being in Scandinavia might be a shipping problem, but it still might be worth while checking them out.

I just found a local company that sells at least the SS spools, and I'm pretty sure I've seen them elsewhere. Otherwise I'll just order from abroad, I just need to order enough to make it worthwhile.

 

[ducasse]

I like the Squeeze 2 also. I'm running three of them, two Profile 1.5's and one Profile RDTA in RDA squonk mode. Also have a Profile 1.5 sitting on a VandyVape Pulse II. I've switched all my Squeeze 2's over to AF for better TC. I'm a happy camper...

I've been wanting to flash mine with Arctic Fox, but I have no Windows computers and don't know if I can flash from the Linux software or just make configuration changes. But that's another topic

I'm a bit wary of bricking it as I really love that little mod.

 

[Seiggy]

I've been wanting to flash mine with Arctic Fox, but I have no Windows computers and don't know if I can flash from the Linux software or just make configuration changes. But that's another topic

I'm a bit wary of bricking it as I really love that little mod.

I looked and no way to do firmware with Linux. The AF forum talks about using WINE, but I don't know Linux. I was concerned also with my first AF upgrade, but is was almost point and click. I actually used the same AF profile from my first Squeeze 2 and downloaded to the other two. Took less than 2 min. each. Plus I had all the setting of AF that I liked from the first now on the 2nd and 3rd. I like it.

 

[Spydro]

I like the Squeeze 2 also. I'm running three of them, two Profile 1.5's and one Profile RDTA in RDA squonk mode. Also have a Profile 1.5 sitting on a VandyVape Pulse II. I've switched all my Squeeze 2's over to AF for better TC. I'm a happy camper...

I also have 3 of the Squeeze 2's. I ran Digiflavor Mesh Pro RDA's on them until the Profile Mesh RDA's came out. Old picture of them with the DMP's on them.

 

[Seiggy]

I also have 3 of the Squeeze 2's. I ran Digiflavor Mesh Pro RDA's on them until the Profile Mesh RDA's came out. Old picture of them with the DMP's on them.

View attachment 938923

HEY.... They look just like mine. Don't have red but rainbow. I had a moment when I bought it. My black and silver I got just about 1 month ago when Eleaf had their 14.99 sale on them. I couldn't pass that up.

 

[UncLeJunkLe]

I've been wanting to flash mine with Arctic Fox, but I have no Windows computers and don't know if I can flash from the Linux software or just make configuration changes. But that's another topic

I'm a bit wary of bricking it as I really love that little mod.

Well if you decide to install AF, make sure you download the original eleaf firmware first so you can have it handy to reinstall if anything goes wrong.
Download link is at bottom of this page Unfortunately, only Win and Mac versions. As was already stated, you might be able to use a Windows emulator on Linux.

 

[ducasse]

Well if you decide to install AF, make sure you download the original eleaf firmware first so you can have it handy to reinstall if anything goes wrong.
Download link is at bottom of this page Unfortunately, only Win and Mac versions. As was already stated, you might be able to use a Windows emulator on Linux.

Thanks a lot, hadn't noticed that download link. Worst case scenario I'll just have to install Win10 and dualboot, I have a license. First I'll try a virtual machine, though.

And thanks to everyone who answered, I've ordered the original Profile, probably won't be here until early next week.

 

[Spydro]

HEY.... They look just like mine. Don't have red but rainbow. I had a moment when I bought it. My black and silver I got just about 1 month ago when Eleaf had their 14.99 sale on them. I couldn't pass that up.

It's not red, it's purple (the true color better in the first picture posted above with the matte silver Profile that I typically ran on it. But I also have the purple Profile (in the second pictures above) that I could have put on it too.

$14.99 is a give away price compared to their price when they first came out. I got my first two Squeeze 2's almost 3 years ago in June 2018. The two of them (black/purple) cost me $170 shipped, but the going price for them settled down to around $65 to $70. The silver one was a gift later from a friend in Hawaii who didn't use it.

 

[Seiggy]

@Spydro, I got my first Squeeze 2 on January 2019 to try out squonking. Now squonking is all I do with mesh. You can't beat the flavor. Price was $59. I always wanted a couple more but the price held me back, UNTIL....$14.99 I think I got whiplash reaching for the plastic. Just wish I knew who on ECF posted about the Eleaf sale on them. Never got to thank them for their post.