Micro Coil for the RBA on your REO

Status
Not open for further replies.

hippieben

Super Member
ECF Veteran
Verified Member
Jul 17, 2012
494
322
Sarasota, FL
30 gauge 2.5 ohm 12 ish wraps around an 18g needle. So much excellence.

ucHGZzF.jpg


Just need practice making the wicks from my giant wad of cotton.
 
Last edited:

Thedan1284

Senior Member
ECF Veteran
Mar 12, 2013
182
524
Travis AFB, CA
No doubt diy for juice is way to go. Seems complicated and overwhelming at first but certainly not beyond anybody's capability if you stick with it just like going to rba's for first time. The taste and dollar savings make it worth trying.

Received a liter of 24 mg from myfreedomsmokes today along with a couple simple flavorings and sweetener. Curious to see how this turns out.
In anticipation of the govt taking our right to purchase liquid nic base. I also purchased 500ml of 100mg for my fridge back at home. (Gotta tell my wife to double bag it and NOT to touch it or open it for that matter). As vaping gets more popular and gets spotlight/news time. I worry about the future restrictions
 

bushmaster

Vaping Master
ECF Veteran
Verified Member
Feb 19, 2010
5,305
11,465
72
Colville, WA
Received a liter of 24 mg from myfreedomsmokes today along with a couple simple flavorings and sweetener. Curious to see how this turns out.
In anticipation of the govt taking our right to purchase liquid nic base. I also purchased 500ml of 100mg for my fridge back at home. (Gotta tell my wife to double bag it and NOT to touch it or open it for that matter). As vaping gets more popular and gets spotlight/news time. I worry about the future restrictions

Freezing 100 mg. in glass was all the rage on ECF for awhile. Supposedly high-nic liquid leaches plastic bottles. This info is a year or more old but worth checking out if you're looking to store nic for a long period. Undoubtedly a fellow REOnaut more knowledgeable than I will respond anyway, so I'd just sit back and wait if I were you.:)
 

super_X_drifter

ECF Guru
ECF Veteran
Verified Member
Oct 4, 2012
10,635
45,119
Somewhere out there
www.youtube.com
Freezing 100 mg. in glass was all the rage on ECF for awhile. Supposedly high-nic liquid leaches plastic bottles. This info is a year or more old but worth checking out if you're looking to store nic for a long period. Undoubtedly a fellow REOnaut more knowledgeable than I will respond anyway, so I'd just sit back and wait if I were you.:)

MFS ships their liters in glass. At least they did when I stocked up :)
 

ukeman

PV Masher
Supporting Member
ECF Veteran
Verified Member
Aug 22, 2010
7,718
5,129
Kauai, Hawaii
being both a Reo nut and a Pluid head has its drawbacks... but i did learn that you can freeze ejuice in glass as long as the bottle is not full. be very careful with it though... when frozen they feel/seem crack-able.

I didnn't know you could get 100mg nic fluid....
What is the formula for using something like that?

i think i shall look into it :)
 

JC Okie

REOnaut
ECF Veteran
Verified Member
Jul 2, 2010
6,511
17,814
Tulsa, OK
being both a Reo nut and a Pluid head has its drawbacks... but i did learn that you can freeze ejuice in glass as long as the bottle is not full. be very careful with it though... when frozen they feel/seem crack-able.

I didnn't know you could get 100mg nic fluid....
What is the formula for using something like that?

i think i shall look into it :)

No...the bottle needs to BE full. The less room for any air in the bottle, the better. At least that's what I've always read.

How I cut it: First I cut it 50%/50% with 500ml of VG. So I end up with 1000ml of 50mg nic. I store half of it back in the freezer. (Now it's 500ml of 50mg nic) With the other 500ml, I just dole it out in a 120ml bottle as I need it. I keep it in the frig (not freezer) while I'm using it. Once I use up 120ml, I mix more. For that 120ml of nic juice that I use for mixing, I dilute it down to 25mg of nic....so I mix it half and half....60ml of nic and 60ml of VG. I use that 25mg nic juice with different flavors in my daily use bottles. I mix for myself (10 - 12mg) and for others (24mg), so I just mix theirs straight.....just put flavoring in a bottle (usually 30 ml bottles) and fill it up with 25mg juice....comes out pretty close to 24mg. For mine, I put my flavoring in my bottle, then use about half nic juice and half VG....comes out around 10-12mg or so.

Not all that scientific....but it works. And it's sooooo cheap......the biggest expense is the flavoring, and that's not bad.
 

nerak

ECF Guru
ECF Veteran
Verified Member
Feb 12, 2011
25,335
60,415
Fairfield Township, OH, USA
www.facebook.com
No...the bottle needs to BE full. The less room for any air in the bottle, the better. At least that's what I've always read.

How I cut it: First I cut it 50%/50% with 500ml of VG. So I end up with 1000ml of 50mg nic. I store half of it back in the freezer. (Now it's 500ml of 50mg nic) With the other 500ml, I just dole it out in a 120ml bottle as I need it. I keep it in the frig (not freezer) while I'm using it. Once I use up 120ml, I mix more. For that 120ml of nic juice that I use for mixing, I dilute it down to 25mg of nic....so I mix it half and half....60ml of nic and 60ml of VG. I use that 25mg nic juice with different flavors in my daily use bottles. I mix for myself (10 - 12mg) and for others (24mg), so I just mix theirs straight.....just put flavoring in a bottle (usually 30 ml bottles) and fill it up with 25mg juice....comes out pretty close to 24mg. For mine, I put my flavoring in my bottle, then use about half nic juice and half VG....comes out around 10-12mg or so.

Not all that scientific....but it works. And it's sooooo cheap......the biggest expense is the flavoring, and that's not bad.

I read through half of that and got lost! I have a liter of 100mg in my freezer also.

 

bushmaster

Vaping Master
ECF Veteran
Verified Member
Feb 19, 2010
5,305
11,465
72
Colville, WA
No...the bottle needs to BE full. The less room for any air in the bottle, the better. At least that's what I've always read.

How I cut it: First I cut it 50%/50% with 500ml of VG. So I end up with 1000ml of 50mg nic. I store half of it back in the freezer. (Now it's 500ml of 50mg nic) With the other 500ml, I just dole it out in a 120ml bottle as I need it. I keep it in the frig (not freezer) while I'm using it. Once I use up 120ml, I mix more. For that 120ml of nic juice that I use for mixing, I dilute it down to 25mg of nic....so I mix it half and half....60ml of nic and 60ml of VG. I use that 25mg nic juice with different flavors in my daily use bottles. I mix for myself (10 - 12mg) and for others (24mg), so I just mix theirs straight.....just put flavoring in a bottle (usually 30 ml bottles) and fill it up with 25mg juice....comes out pretty close to 24mg. For mine, I put my flavoring in my bottle, then use about half nic juice and half VG....comes out around 10-12mg or so.

Not all that scientific....but it works. And it's sooooo cheap......the biggest expense is the flavoring, and that's not bad.
Same here--zero headspace or as close to that as possible. Air is the killer.
 

pdib

ECF Guru
ECF Veteran
Nov 23, 2012
17,151
127,511
www.e-cigarette-forum.com
Guys I'm thinking about drilling my stock airhole on my rm2. Any tips? I don't have a vice or even small drill bits lol so gonna have to make a trip to Lowes or something. I just have a hand drill.

What do I need to get so that I can emerge from this diy without a ruined cap and all my fingers?

So. Lowe's doesn't have the sizes you need. You want sizes, #56, #55 and maybe #54*. Alternatively, the RM2 is pretty soft. I would suggest you start with reaming the hole a little at a time (firmly, and with some wiggling and twisting and some sincerity, tho). If you don't have a fine awl, ice pick, corkscrew, pointy thing on a swiss army knife, you could buy something like that at lowe's.



*or 1.3, 1.4, & 1.5 mm

edit: eh, throw in #53 too
 
Last edited:

liveone

Super Member
ECF Veteran
Verified Member
Mar 22, 2012
714
1,108
Los Angeles
So. Lowe's doesn't have the sizes you need. You want sizes, #56, #55 and maybe #54*. Alternatively, the RM2 is pretty soft. I would suggest you start with reaming the hole a little at a time (firmly, and with some wiggling and twisting and some sincerity, tho). If you don't have a fine awl, ice pick, corkscrew, pointy thing on a swiss army knife, you could buy something like that at lowe's.


*or 1.3, 1.4, & 1.5 mm

edit: eh, throw in #53 too


Great tip pdib! I took a finishing nail with a squarish tip and bent it so that I can reach the airhole from both sides. I held it in place with pliers and ground the top back and forth with nail tip inside the airhole. Worked nicely and the draw is perfect now.
 

Gigdujour

Ultra Member
ECF Veteran
Verified Member
Jun 9, 2013
1,919
12,490
Michigan
I just buy it mixed to the ratio I vape. It costs a little more but it's still cheap as hell. For the price of 2 cartons of smokes, I get enough premix to last about 2 years :)

I've been buying it in the 50mg/ml base and using the e-juice app on my iPhone to get my targeted nic level :) Where do you folks get your nic base? (I'm always looking for a better deal)
 

Xobeloot

The Dirty Monkey
ECF Veteran
Verified Member
May 29, 2013
4,742
19,792
Grafenwöhr, Germany
So. Lowe's doesn't have the sizes you need. You want sizes, #56, #55 and maybe #54*. Alternatively, the RM2 is pretty soft. I would suggest you start with reaming the hole a little at a time (firmly, and with some wiggling and twisting and some sincerity, tho). If you don't have a fine awl, ice pick, corkscrew, pointy thing on a swiss army knife, you could buy something like that at lowe's.


*or 1.3, 1.4, & 1.5 mm

edit: eh, throw in #53 too

I used an 18g IV needle. Cut through like butter and gave me that fraction of a mm that I needed :D
 
Status
Not open for further replies.

Users who are viewing this thread