Mtl rta choice help

[Ben Killeen]

hay all.

I am switching from Dtl to mtl vaping.

I have been selling all my dtl tanks ( OBS engine 2, serpent elevate rta, Vandy Vape revolver), and I am currently vaping an eleaf basal.

I am looking at getting an mtl rta from my local but can’t decide on a beserker, beserker mini or siren 2.

And suggestions on them or ideas would be great.

Due to the laws here I can’t buy online, so I am restricted to what’s here.

On my basal I only use one air hole.

 

[benley73]

Are you 100% MTL or a tighter restriced lung , somewhere in-between ,

Sent from my ONEPLUS A3003 using Tapatalk

 

[Ben Killeen]

Are you 100% MTL or a tighter restriced lung , somewhere in-between ,

Sent from my ONEPLUS A3003 using Tapatalk

Mtl not Rl

 

[benley73]

Mtl not Rl

Well you can order from china and they will write small tubes or ornament on package for customs
But other than that its see what's Available locally,
Maybe Facebook groups in your country to see if ship internally.

There hundreds of threads for MTL RTA,s

Sent from my ONEPLUS A3003 using Tapatalk

 

[Falconeer]

I was going to have a look through Finnvape's pages to see what their current stock was to see if they had anything I could suggest ( I use Finnvape's shop in Fuengirola when I'm in Spain ) but find the site will not now load at all even here in the UK - have your government banned or blocked it?

If they have it does look like you'll either have to visit them in person or have a look at the likes of Fasttech etc in China.

You are in a difficult position, sorry and I wish I could be of more help.

 

[Ben Killeen]

Well you can order from china and they will write small tubes or ornament on package for customs
But other than that its see what's Available locally,
Maybe Facebook groups in your country to see if ship internally.

There hundreds of threads for MTL RTA,s

Sent from my ONEPLUS A3003 using Tapatalk

I’m not on Facebook

 

[Ben Killeen]

Well they had a mini beserker on sale for 25e so bought that.

I have built a 2.5mm ID vertical coil and will test it later (lunch break has ended)

 

[Ben Killeen]

Well tested it, 26 gauge ss316l, .55 ohms at 16w.

Vertical coil 5 wraps using 50/50 mix and 3mg nic salt.

Vapes very smooth with a slight warmth on the tightest draw.

Flavour is smooth but not massive, happy to keep the whole vape smooth instead of massive flavour etc.

Doesn’t vape well on TC so will keep it on VW.

Early impressions are positive

 

[Lalli]

Try 28ga kanthal, 2.5 or 3mm maybe 5-7 wraps. Perhaps around 1.5ohms and 10w - that's what I like the best

Finnvape or any other Finnish vape shops are not allowed to list any vape gear on their pages so don't bother looking there.

 

[Ben Killeen]

Try 28ga kanthal, 2.5 or 3mm maybe 5-7 wraps. Perhaps around 1.5ohms and 10w - that's what I like the best

Finnvape or any other Finnish vape shops are not allowed to list any vape gear on their pages so don't bother looking there.

Yeah I know, it’s illegal to advertise and buy online here

 

[CrazyCory564]

If you don't mind spending decent money on quality machining, can't go wrong with the kayfun prime. That's my main go-to RTA for MTL. Air holes go from 1mm to 2mm in 0.2mm increments.

Kayfun Lite just came out for a few bucks less, although I still think the prime is overall the better option. With that said the new kayfun lites are extremely tiny in regards to height, so if that matters to you, may want to check it out. It uses a nylon screw in the 510 to adjust airflow (semi-internal set it and forget it style rather than an external ring), and can go from practically all the way close to 2mm full open. It is bottom fill rather than top fill. It's really going back to the older designs like the kayfun 3.1es.

If you want dtl or MTL options, you can try the Festia RTA

If you want cheaper MTL options, Doggystyle 2k16 and 2k18 clones are like 12 bucks on 3f. Also the Hastur Mini MTL RTA for like 30 is a good option

Heard great things about the EHpro true RTA as well; I plan on getting one soon

Sent from my SM-N950U using Tapatalk

 

[tdman77]

26ga is a bit much for the berserker. 28ga KA1 6-8 wraps 1.0+ ohms should be the range which gives you the best MTL vape. Have you played with TCR on your mod? Most mods are close but setting your own TCR is the best way to go.

 

[mac-nutty]

doggiestyle in avatar good but these are better
kayfun lite 2019 clone?
Buy SXK KF Lite 2019 RTA Silver 316SS 22mm Rebuildable Tank Atomizer

or the yftk evl reaper v3 clone? has good reviews from some mtl vets!
Buy YFTK EVL Reaper V3 RTA Silver 316SS 2ml 22mm Tank Atomizer with Buy YFTK Silver 316SS MTL Airflow Insert for EVL Reaper V3 Style RTA

clones = try before you buy

 

[Skunk!]

I have been quite happy with my Hastur mini so far.

 

[MartinD]

If it's hot,try Ka1,28ga,2mm,7 wraps,12,5-13w.This is working fine on mine Bers Mini.