MVP Owners Group-into the next generation
- Thread starter pufZeppelin
- Start date
- th_trl_thread_readers 0
- Status
Just wondering... are you sure Kelly has anything to do with a few of these? Different look, different domain ownership etc... I have no doubt they show the same deals as I am sure they are all subscribed to one another. Again,... just wondering.
- Dec 18, 2013
- 2,946
- 56,640
- 79
From what I understand, the MVP 20 isn't the same as the MVP3. The MVP3 isn't scheduled to be released til January.
Sorry homey but you are misinformed. The 20w is the 20w the V3 is yet to be released. The new V4's do not come in 800 the come in 700 and 1000. So far we have only seen the 1000 released.
*Edit: MY BAD I meant to type 750 and 1000 above
Last edited:
He doesn't own the host servers but has the different sites set up since this is how he makes his living. The special discounts are intended for readers and when using the link on a page there with the coupon code provided the discount is then applied at the vendor end. Of course I went to FT directly and was still able to use the same code for the V9 I ordered.
That won't be coming quite yet. With all the new 20w and 30watters popping up they simply vamped up the 2.0 by cutting the fat out to allow for the changes in the I suspect slightly large chip card inside as well as dumping the 510/eGo connector since most eGo threaded anythings can't even handle 15w.
Rather then seeing the updated model that may offer some other new features as well as a better button to worth since that has been one of the main issues people have complained about with the 2.0s they made a marketing decision to keep up with the mini mod competition going on. You may have to wait 4 or 5 more months before they decide to release a 3.0 version allowing this one to sell for the time being.
just watched Busardos review (both VV4 & MVP20W)
tested both buttons against old V2
MVP V2 // 2-2.1 lbs pressure to push (as has been)
VV4 // 1.5-2 lbs pressure to push (increased)
MVP 20W // 1.0 lbs pressure to push (decreased)
- https://www.youtube.com/watch?v=sWE4P1tMUFA
the ARM microprocessor in the VV4 works WAY COOLER
than the same in the MVP 20W
15w vs 20w 750 & 1000 mah / 2600 mah
$50 vs $38
When going vendor to vendor and usually wholesaler to wholesaler when first looking anything new the product descriptions are often different such as no mention of two models or one shows one thing while the next shows something else. You say 700mah for one model and a vendor shows 750mah for the same thing. https://www.misthub.com/product/innokin-itaste-vv-v4-0-express-kit/
Another classic example is even the factory indicating the Smok Tumbler tanks being 2.5ml while one vendor kept showing 3.5ml instead. Every other place showed 2.5ml as well. When put to the test you had to lean the tank over at a 45 degree angle when an ejuice bottle has a blunt tip for an approx. 2.5ml fill. When using a bottle with a narrow longer tip if not a needle bottle you could easily put in right about 3.5ml. Likewise one vendor has the V4 listed as 800mah. V4 Innokin eGo iTaste VV | iTaste VV eGo Express Kit | iTaste V4 eGo Threads
Now go to a Chinese wholesale site and it confirms what was found at Misthub namely 750mah not 700 like V3s. 2014 Innokin iTaste VV 4.0, View Innokin iTaste VV 4.0, Innokin Product Details from Shenzhen A-Touch Electronic Co., Ltd. on Alibaba.com
I ran into this with eGo batteries constantly. One place would have the eGo mini as 350, Sweet-Vapes where I was getting several showed them as 400mah. And then other places had them listed as 450mah.
It does come with a cord just not the 3 way the MVP2 came with. Which most don't need the old one the Apple cord won't fit on the newer ones to charge. Most phones come with a cord with a usb and the plug into the phone. That tanks the MPV2 comes with aren't the best tanks and the coils don't last long and also cost enough. I gave my 30 tank away when I bought my MVP2.
True the MVP20 is the first release and the MVP3 will be coming soon in Jan!
I just got my new MPV20 from VaporBeast for 35.95 including shipping using the code "SNOW". I have let it warm up to room temp (sub zero outside) and about ready to put the tank on it!!!
Oh wow great loving it so far!!! And yes the buttom is much easier to push!
Oh wow great loving it so far!!! And yes the buttom is much easier to push!
Last edited:
just watched Busardos review (both VV4 & MVP20W)
tested both buttons against old V2
•MVP V2 // 2-2.1 lbs pressure to push (as has been)
•VV4 // 1.5-2 lbs pressure to push (increased)
•MVP 20W // 1.0 lbs pressure to push (decreased)
- https://www.youtube.com/watch?v=sWE4P1tMUFA
the ARM microprocessor in the VV4 works WAY COOLER
than the same in the MVP 20W
15w vs 20w 750 & 1000 mah / 2600 mah
$50 vs $38
45.29 minutes? Seriously? I work and stuff.
Crib notes and more comments from those who see the whole thing please.
He doesn't own the host servers but has the different sites set up since this is how he makes his living. The special discounts are intended for readers and when using the link on a page there with the coupon code provided the discount is then applied at the vendor end. Of course I went to FT directly and was still able to use the same code for the V9 I ordered.
I didn't say, nor did I mean, that he owned the host servers... very few do that any more. I said different domain ownership and asked if you were sure he had anything to do with all of them... that's OK. I emailed him direct and will likely email the rest of the site owners just so I know what they say. BTW: Yeah, I understand how affiliate links and coupon codes work
Thanks
just gathering info from posts here
just to clarify; MVP 20W is an upgrade to the MVP V2
the all NEW version (next generation) MVP V3
will be a larger device (much bigger mah and a little taller than a Hana)
FROM INNOKIN
Innokin will also be unveiling the new MVP3
and running a ton of contests and giveaways!
(More info about the MVP3, & the launch date will be announced on New Year's Day!)
just to clarify; MVP 20W is an upgrade to the MVP V2
the all NEW version (next generation) MVP V3
will be a larger device (much bigger mah and a little taller than a Hana)
FROM INNOKIN
Innokin will also be unveiling the new MVP3
and running a ton of contests and giveaways!
(More info about the MVP3, & the launch date will be announced on New Year's Day!)
haha, PB gave it a thumbs UP
(remember he gave the V2 NO THUMBS)
he liked it, but treated it as an ego battery (what it is)
called the screen OLD, the U.I. annoying
spring loaded 510, but NOT spring in adapter (I wondered that)
have to agree with him myself
I'm not trying to act as tho it is an expensive sophisticated device
it is just a great, top of the line ego - in my eyes -
---------------------------
forgot to mention the VV4
PB was MORE impressed with it (me to)
watching him use the menu, made me wish MVP20W
worked as such !!!!!!!!!!!!!!!!!
if they could just combine the VV4 menu U.I. in the MVP20W
I am under impression same chip ?
he complained about square battery and round toppers
from PBusardo
1000 - - - -750
Last edited:
just gathering info from posts here
just to clarify; MVP 20W is an upgrade to the MVP V2
the all NEW version (next generation) MVP V3
will be a larger device (much bigger mah and a little taller than a Hana)
FROM INNOKIN
Innokin will also be unveiling the new MVP3
and running a ton of contests and giveaways!
(More info about the MVP3, & the launch date will be announced on New Year's Day!)
I realize that you may have trouble quoting me, when I am quoting... so, I'll help out a little bit in keeping the word clean and pure (with sources)
Not anymore...
Innokin_Paul said:
Innokin_Paul said:
Not according to Innokin officially. They say that the MVP20W is just that... and there is an MVP3 to be released early 2015... I quoted "them" (paul@innokin.com) not many posts ago... here
And... their facebook page...
Innokin.Technology said:
There we go... now if we could all email Paul at Innokin (dot com) and ask for updates right here in our thread...
WHAT youre the author of that stuff ??
OH, you have exclusive rights to reddit, facebook, and innokin
trying to keep it simple for the peeps that come here to read about
the MVP, and whats going on...
gathered info and consolidated in one place
get over yourself (stop cluttering up the thread)
jeez
I certainly don't blame you any! When I first got mine in last year I had just got done trying out the Smok Trophy, Vision Victory, and of course the exact same IClear 30 that with the 2.0! All three rot! Then when trying out the Tumblers which some were raving about I found the best was the 2ohm coils not the 2.4ohm standard or 1.8ohm LR replacements. Later one vendor actually changed from the 2.4 to 2ohm for their selection of color tanks which helped separate the menthol from the berry or fruit blends or the Mocha Java or the...
This year the planning was better while more was spent in less time running up a slight in upgrading by picking and choosing while still ending up with a few more Vamo type APVs the new tanks all worked out compared to how it was pick and dump and pick another and dump that and another dumped until finding one that worked out! All that to get away from the 1.6ml losers! Rather not knowing which mod and not wanting another MVP while still having an stable 2.0 now tucked away as the lower wattage spare the tanks required a bit more then the 3-15w eGo VV/VW batteries offer.
I didn't say, nor did I mean, that he owned the host servers... very few do that any more. I said different domain ownership and asked if you were sure he had anything to do with all of them... that's OK. I emailed him direct and will likely email the rest of the site owners just so I know what they say. BTW: Yeah, I understand how affiliate links and coupon codes work
Thanks
Hear you on that!
At first I didn''t even know about the first link and there were two Vaping Discount sites he keeps up. The 411 sire is where all of his YouTube review clips can be looked while the Vaping Cheap site is the accumilation of all of the daily deals that pass through. Want a new RDA or RBA and not sure? keep an eye on the site there. Need a new mod? check up there. That special discount on the MVP 20W is at a US vendor not Fasttech and why their regular sale price is $50 compared to the $32 with free shipping when using the special discount code. iTaste MVP 20W (20 Watt) $31.99 SHIP'D | Best Vape Deals
As for the 3.0 I mentioned it may not be seen next month but delayed since the 20w just came out. I've been hearing January as the time for other things as well while the Smok Guardian E-Pipe II mod was supposed to be out back in October but one delay after another until a few places got those in the middle of this month. The delay meant a better end result however over what I suspect may be a rush job on these just to match wits with the other compact mods being tossed out lately.
EDIT: I spoke with Kelly after watching his latest review and he indicated which three sites plus the FB group he runs.
Vapingdiscounts.com,
411Vapes.com
GoldstarVapes.com
The last is rather recently added and many of the deals he locates from the other sites as well as emails from vendors.
Last edited:
WHAT – you’re the author of that stuff ??
OH, you have exclusive rights to reddit, facebook, and innokin
trying to keep it simple for the peeps that come here to read about
the MVP, and what’s going on...
gathered info and consolidated in one place
get over yourself (stop cluttering up the thread)
jeez
Nah. I figured you had trouble with quoting quotes, given the forum software removes quote from within quotes by default.
Complaint Department
I just saw Phil's review. Yes, he is yacky, but he is complete. The MVP20W seemed to do well with a 2.5ohm(ish) resister when it came to power. Steps down, too.
Am looking forward to the New Year's Day announcement. I actually see the 20W as a step forward for the people wanting to grow from the pen-style units. For $35, not bad.
The 3.0 seems that it will be a much bigger step. Hope they mention an initial price.
Am looking forward to the New Year's Day announcement. I actually see the 20W as a step forward for the people wanting to grow from the pen-style units. For $35, not bad.
The 3.0 seems that it will be a much bigger step. Hope they mention an initial price.
As you know I had ordered a green MVP20 from VaporBeast which came today and tried it with a Protank mini 2. The same one I had already on my MVP2 with the same V, I can tell the differences. The flavor is clearer (better) and a nice vapor. The button is much easier to push, so use to the MVP2 I thought I wasn't holding it in.
I decided to order MVP Sleeve $4.99 in green for the new MVP20 from Madtown (member of ECF) tonight the total is $7.49 with shipping. INNOKIN iTASTE MVP SLEEVES - MADTOWN VAPOR I have already gotten one from them before in aqua for my MVP2.
I decided to order MVP Sleeve $4.99 in green for the new MVP20 from Madtown (member of ECF) tonight the total is $7.49 with shipping. INNOKIN iTASTE MVP SLEEVES - MADTOWN VAPOR I have already gotten one from them before in aqua for my MVP2.
- Status
Similar threads
