Ironically enough, one of my fastest eBay vape mail shipments was directly from China for a Vision Spinner 2 and two PTv1s for $19 to my door... Took less than a week...
MVP Owners Group-into the next generation
- Thread starter pufZeppelin
- Start date
- th_trl_thread_readers 0
- Status
Just got my MVP 2.0 in the mail and I must say that this thing hits like a CHAMP!
well hello Pikestr28, welcome to the big deal MVP club
yeah-man, the MVP just gets it done
it really is a great device
good luck
Do Not ~ overtighten topper tanks
dont wait to charge (charge soon & charge often)(no memory)
its either Volts OR Watts (never both)
and dont drop it on your toe
hey-Hi there hyck,
nice to have ya aboard
smart move getting ye `ole MVP box
I think it is because of the translation of Chinese
and then the readout limits...
dont forget:
Do Not ~ overtighten topper tanks
its either Volts OR Watts (never both)
dont wait to charge (charge soon & charge often)(no memory)
- - -
holding both buttons:
-first display is, Coil Ωs
-second display is, Charge Remaining in internal battery
- - -
single button operation:
>push and hold (top button) "P" for watts control
>push and hold (bottom button) "U" for volts control
-the first display will always be Puff Counter (0-999)
(which actually just counts how many times you push your Fire button)
-second number displayed is the adjustable setting (v or w)
-- 3 clks off / 3 clks on (puff counter resets to "0" each time)
-- MVP memory maintains until you change it
Seems I m a bit late to the party, but if you dont use tank cracker juices, I ve been very happy with a gs-h2 @ 1.5ml and a gs-h5 @ 3ml. They use a readily available, cheap single element atty which can also be re coiled should you wish to go down that route
Ok so hello everyone, quick question.
If i set my Watts does it adjust the volts automatically or do i set both? Only reason i ask is because my Vtube says it automatically adjusts the volts when in watts mode but nowhere does it say that the MVP does this.
Also hard one for people to answer but what kinda sound should this make i use a protank 2, protank 3 and a iclear30, the two protanks make a kinda burning sound abit fizzy maybe, i think this is normal, but the two protanks have an extra few pops and bits to them? seems how ever low i use these they do the same.
I run mine at about 3.5-4V and between 6-8W is this about right if im happy with flavour and vape?
Thanks alot!!
If i set my Watts does it adjust the volts automatically or do i set both? Only reason i ask is because my Vtube says it automatically adjusts the volts when in watts mode but nowhere does it say that the MVP does this.
Also hard one for people to answer but what kinda sound should this make i use a protank 2, protank 3 and a iclear30, the two protanks make a kinda burning sound abit fizzy maybe, i think this is normal, but the two protanks have an extra few pops and bits to them? seems how ever low i use these they do the same.
I run mine at about 3.5-4V and between 6-8W is this about right if im happy with flavour and vape?
Thanks alot!!
Ok so hello everyone, quick question.
If i set my Watts does it adjust the volts automatically or do i set both? Only reason i ask is because my Vtube says it automatically adjusts the volts when in watts mode but nowhere does it say that the MVP does this.
Also hard one for people to answer but what kinda sound should this make i use a protank 2, protank 3 and a iclear30, the two protanks make a kinda burning sound abit fizzy maybe, i think this is normal, but the two protanks have an extra few pops and bits to them? seems how ever low i use these they do the same.
I run mine at about 3.5-4V and between 6-8W is this about right if im happy with flavour and vape?
Thanks alot!!
Just set one or the other. I set the wattage and it will calculate the voltage.
My PT3 pops as well, no worries.
So I got the ego - ego adapter in the post and it s perfect
on its own with ego tanks or with a cone for 510 tanks
no more fun and games lifting the centre pin for me
thanks for the heads up Pufz
on its own with ego tanks or with a cone for 510 tanks
no more fun and games lifting the centre pin for me
thanks for the heads up Pufz
So I got the ego - ego adapter in the post and it s perfect
on its own with ego tanks or with a cone for 510 tanks
no more fun and games lifting the centre pin for me
thanks for the heads up Pufz
wow ! no kidding - that was darn FAST !
well very glad it has cured your problem and made ya happy !
where did ya get the 'ego-ego' adapter ?
I got it from stealth vape via your link
The postage charge was a bit painful but the gadget does the job so wth
The postage charge was a bit painful but the gadget does the job so wth
Ok so hello everyone, quick question.
If i set my Watts does it adjust the volts automatically or do i set both?
Only reason i ask is because my Vtube says it automatically adjusts the volts when in watts mode but nowhere does it say that the MVP does this.
Also hard one for people to answer but what kinda sound should this make i use a protank 2, protank 3 and a iclear30, the two protanks make a kinda burning sound abit fizzy maybe,
i think this is normal, but the two protanks have an extra few pops and bits to them? seems how ever low i use these they do the same.
I run mine at about 3.5-4V and between 6-8W is this about right if im happy with flavour and vape?
Thanks alot!!
hello Thevapourtrail, and welcome to the MVP club thread...
believe it is just a given, Ohms Law theory…
rule of thumb: add 2.0 to your OHMs to get your Volts (2.0+1.8Ω=3.8v)
then if you wish, you can convert to Watts to suit your needs/want...
so if you set your Watts it auto adjusts your volts like that
eg: 1.8Ω @ 8.0watts = 3.79v
which ever setting you touch last, is what mode your device outputs
(you set Volts OR Watts; never BOTH)
that snap/pop/crackle is just the heat from the coil wire
overcoming the juice inside, kinda like boiling bubbles rising...
I like when they do that, it seems that’s when they are working good
if you think some make different sounds, do you know each Ω and then
compare Ω to sounds... (a 1.8Ω should 'pop' more than a 2.5Ω)
ever seen one of these ?
- https://www.watlow.com/reference/tools/ohmslaw.cfm
Last edited:
I would like to try one of these also
nice size, afc, coils, price
- $4.78 GS-H5T Bottom Coil Clearomizer (3.0ml) - translucent / 2.4ohm at FastTech - Worldwide Free Shipping
I would like to try one of these also
nice size, afc, coils, price
- $4.78 GS-H5T Bottom Coil Clearomizer (3.0ml) - translucent / 2.4ohm at FastTech - Worldwide Free Shipping
Wish it was glass, I'd jump right on it
i ve been using mine for months ...I would like to try one of these also
nice size, afc, coils, price
- $4.78 GS-H5T Bottom Coil Clearomizer (3.0ml) - translucent / 2.4ohm at FastTech - Worldwide Free Shipping
it now has a 1.8 ohm coil in it
bought for £2.50 each and a pound each for the h2
Wish it was glass, I'd jump right on it
They would have some trouble trying to mould that in glass ... probs end up with a pt mini
( it took every ounce of restraint not to make a humourous remark )
I Love my MVP! Got it a week ago last Wednesday in the VapeMail. I do about 420 a day on, it goes down to about 3.8 and I charge it overnight. Have a Nautilus on it, just ordered the BVC coils for it. Use it at 8 Watts and it lasts me all day! Happy Vape Friday All!
Haha! anything else I should get while I have it in my cart? Will the kanger old style coils fit this, do you know?
Still don't own it, but the eleaf iStick is a sure contender. We'll see... My doubt is with heavier tanks like a KF or a Lemo.
- Status
Similar threads
