MVP Owners Group-into the next generation

[whodat2112]

I dont need the 30 watts, but I like the look, it should be quite functional, and there's never too much battery to go around. So, if it is in fact affordable, I can see a couple of these coming my way.

Agreed!!!!!!!!

 

[pufZeppelin]

from the V1- beauty ring hung over, no ego threads, button popped out
then V2, then V2.5, now just upgraded 20W
now the all new V3
I’d think this is innokin’s ‘eco-line’ for newbies and entry level vapor’ers...

will the V2 continue ?
possible future of the old V2 MVP …?
FOR SALE : new
small box vaporizer device
vv / vw (5V-11W-3.5A) 510/eGo threaded 2600 mAh battery
$19.99

think Innokin is plenty aware of available markets is planning to wow us

wondering about the “VTR”, I don’t care about that style PV (as it sits)
but I sure am curious what Innokin has up their sleeve
wonder if they continue VTR form factor, or just change it up
a little work, VTR could mimic the ‘eGrip’...

vaping future so bright, I gotta wear shades

​

 

[pufZeppelin]

who has them for 27?

it was here, but they're out of stock now
- Innokin iTaste MVP 20W - ecig.com


- Innokin iTaste MVP 20W - Silver

- Innokin iTaste MVP 20 Watt - 101 Vape

- http://www.vaporbeast.com/innokin-mvp-2-0-full-kit.html

whoops, realized I forgot to " - " you

 

[caroloto]

Is that from Innokin's recent statement or the one from a few mnths ago?

Today posted from Innokin Paul

 

[kiler]

I wonder what the dimensions are on the 3.0
Hopefully a little smaller...

 

[pufZeppelin]

I wonder what the dimensions are on the 3.0
Hopefully a little smaller...

actually, the comments of one who had one,
was ~it was a little bit bigger~

​

 

[pufZeppelin]

​

so it is the end of “2014”
and we now see two new MVP’s released
•an upgrade v2 20 W
•and now the all new V3 30w

. . . . . . . .



I think " 2015 " is gonna be a good year

 

[sando7]

any mention of price on the MVP V3?

 

[vincom]

quote from innokin about the evolve chip

[–]InnokinInnokin_Paul

We wanted to keep the MVP3.0 as affordable as possible. A second, higher wattage device with temperature control will be announced in the future.

future, who knows

 

[sando7]

so the price has not been announced yet, i sure hope it is gonna be affordable; thanks

 

[pufZeppelin]

​

H A P P Y . . . N E W . . . Y E A R

TEAM . . MVP​

​

 

[clnire]

Happy, Healthy, Prosperous New Year to all! Good things coming in vape gear this year!

 

[PaulBHC]

All you FLA people going to bed early?

 

[clnire]

All you FLA people going to bed early?

Not yet!

 

[jymkym1]

Local shop has new version mvp for $60.00

 

[draconianchaos]

So anyone that has the 20W, can they report how it performs under 4.0v in relation to the version 2.0. I saw in pbusardo's video it used pulse width modulation until around 4.5 volts I think it was.

 

[amoret]

I really don't need 30w and rarely ran the 2800 in to the yellow but i really like the looks of the side button. I'm itching to feel the push on my new MVP20 that should be here in the next hour or two. Reports have it being a lot softer.

Yep, the button is my main interest. I have yet to go over 8 watts, and the size isn't a problem for me. I just want an MVP with a firing button I can use.

 

[Night Hawk]

So the MVP 3 has been announced. It's pretty ugly and I was secretly fantasizing it would have an Evolv temp control chip of some kind....even if it was 25watts. Oh well. I'll probably still get one as a travel back-up for my Flask.

I already have a 30w DovPo E-LVT that runs 18650s with an Atlantis sitting on top while the V3 will run anything down to 0.4ohm according to what is on the company's FaceBook page. https://www.facebook.com/Innokin.Technology

Don't look for it at the main site however. Their blog only shows Best choice for holiday season---iTaste MVP 20W

The photo on the FB page show the 3.0 as having relocated the main button to the side rather then using the old awkward shoulder surrounding button on top of face plate style many complained about.



This is what the MVP 20W looks like in contrast.



And in other news! One vendor showing release date as 1/25 for the MVP 3.0. Apparently one vendor will supposedly be haivng the lowest price seen for them on the initial release? https://www.aspenvalleyvapes.com/shop/box-mods/authentic-innokin-itaste-mvp3-0/

 

[whodat2112]

so the price has not been announced yet, i sure hope it is gonna be affordable; thanks

I am very interested in the price as my MVP2 is a very solid device!!!!!

 

[Night Hawk]

Yep, the button is my main interest. I have yet to go over 8 watts, and the size isn't a problem for me. I just want an MVP with a firing button I can use.

Now that's some actual information on a 3.0 version being seen along with a few photos the 30w version should see that solved with the button moved over to the side like a good number of other box mods including the VTR. The MVP 20W still sees it in the same place as the 2.0 but supposedly lighter on the touch. I'll know for sure in a day or so when the one I ordered is in since that will replace the VTR.

Once you get into better tanks that will allow you to get into the higher wattages since then that will usually end up being the need to run them! With the Aspire Nautilus most are finding themselves starting off at 11w and going higher which exceeds the 2.0 capabilities and maxes the 15w APVs and mods. The MVP 20W will solve that problem.

I am very interested in the price as my MVP2 is a very solid device!!!!!

It's like everything else! Some will jack the price way up being the new kid on the block while some will give you a break on price like the $27- special at the one vendor seen for the 20W model. Often the ones marking way down are not planning to keep them in stock but want to see them move fast and mark the price down to keep them moving. We'll have to wait to see once it is out however.