MVP Owners Group-into the next generation
- Thread starter pufZeppelin
- Start date
- th_trl_thread_readers 0
- Status
It does seem now what changed in 6 months takes less than a week. New something almost everyday!
so trying to remember, back when it all started
on this, my 2 yr vape-a-versary
sister came over (musta been first week in June, 2013)
with a bag of e-cig gear that she had given up on…
a bunch of cig-a-like and a big one (now I know as a 900mah eGo & a CE4)
I didn’t want the big honky thing, wife liked it
I took the Blu styled ones...
I taught myself how to pop the end cap off and refill with ejuice
EJUICE wow ! – found out the “hard way” about PG / VG
me and PG DON’T get along (nuff said)
if I recall correctly;
ran out of my cigarette supply the evening of the 23rd
June 24th AM, I started vaping hard
charging those little *****ers non stop, dripping into those cig-a-cartos
it all came to a screetching halt pretty dang qwik !
found a local B&M vape shop, bought a eGo 1000 and MT3S & Johnson Creek juice
a few weeks pass, I stumbled across a web-site that changed my life
H_E_L_L_O Electronic Cigarette Forum ! (ECF)
damn site kept popping up during my google searches
when I first came into ECF I thought something was wrong
everything kept changing, it was like an ANT Farm
then I realized it was just Traffic
it was really that bizzy
I’ve been dancing around forums for years,
but none were like ECF…
Thanx ECF < damn glad I found you… !
then a few more weeks go by, and I’m deciding whether to
save a few bucks and get the MVP 1.0 or get the almost out MVP 2.0
couldn’t be much difference, heck they look identical…
then EVODs, top coils, vivi novas, glass tanks; etc.
hello - the game changing ProTank came out
manufacturers hustled to keep up…
then the cotton era marched in about the time I was
getting good at building coil
then BDC – everything was about DUAL COILS
seems about this time the ‘power’ wars begun
then we enter the Box Mod take over
and currently experiencing SUB OHM mania
vaping has changed the posture of the EARTH (for the good !)
Vape≈Longevity
PS> I have since converted my sister
and she is about a year into being Smoke Free
Great to hear from you Puff,I remember when you came on. Things have changed so, so much. But one thing remains the same, these damned little boxes are keep on Vaping!
Edit: By the way, the CF 4 is one sweet little device. Just nestles in the hand.
MVP 3 Pro Express Kit by Innokin - Eciggity $59.99 less 10% with reddit10 brings it down to $53.99.
Put this in your favorites: vapeCrawler
Put this in your favorites: vapeCrawler
VaporDNA price $54.99
iTaste MVP 3.0 Pro 60W Express Kit
Latest $10 off coupon found here bringing it to $44.99
Vapor DNA $10 off codes go HERE! | .................. Forums - An Ecig and Vaping Forum
iTaste MVP 3.0 Pro 60W Express Kit
Latest $10 off coupon found here bringing it to $44.99
Vapor DNA $10 off codes go HERE! | .................. Forums - An Ecig and Vaping Forum
Does the MVP 2 have overheat protection? My oldest has shut down on me twice while somewhat chain vaping. Plugging it in to the charge cable restarts it (flashes 888 then 1 E 1). 2.6 coil at 8 watts shouldn't be an overload.
I think 1E1 signals something internal board error
most times I’ve read that, peeps had pin pushed in
or excess juice inside, both resulting in a short…
best guess, your o-ring insulator around your center pin broke
allowing center pin to short against inside, side (of 510)
just a shot in the dark
One of my MVP2s is doing this and that makes sense puf...It charges, works, but suddenly goes wonky. Now it is over 1 1/2 years old too, but I may try to replace the oring, which I have never had to do.
I put 3/4 of a drip tip oring down below the pin a long time ago and stopped having connection problems. No tanks that leak any more either. But it could be that time has taken a toll on the factory pin ring underneath allowing some pin wobble or something.
I think , even if you have been a good little vapor'er, and never crushed
your pin down in, or had a lot of excess juice spillage, things just wear out...
if that isolating o-ring is not doing its job any more
only course of action would be to make it stronger, faster
your pin down in, or had a lot of excess juice spillage, things just wear out...
if that isolating o-ring is not doing its job any more
only course of action would be to make it stronger, faster
I keep waiting for it to give up so I can make something out of the good parts. But new stuff keeps coming out that is so cheap it is almost not worth my time.
My wife gets my used MVPs. The MVP2 just didn't hold a charge long enough so she got the MVP20w and I got an MVP3.0. There is just no problems, I keep the Nauties filled so she has a choice and she plugs it in just like her phone.
Be nice if we could share more of the hobby, but it works for us.
Speaking of the cheap stuff coming out, their is a lot of competition. I am glad that Innokin keeps a distance from that.
I think the presence of Evolve will bring a TC model.
Be nice if we could share more of the hobby, but it works for us.
Speaking of the cheap stuff coming out, their is a lot of competition. I am glad that Innokin keeps a distance from that.
I think the presence of Evolve will bring a TC model.
This sucks, was going to get the coolfire 4 using the $10 off, but they have ever color but blue, which is what I want, and as the coolfire 4 looks so cool in blue, not prepared to change my color choice, not even for $10 off.
Hoping to score a good deal somewhere for one this weekend
Innokin Cool Fire IV - ecig.com | Electronic CigarettesThis sucks, was going to get the coolfire 4 using the $10 off, but they have ever color but blue, which is what I want, and as the coolfire 4 looks so cool in blue, not prepared to change my color choice, not even for $10 off.
Hoping to score a good deal somewhere for one this weekend
$43.85 free shipping
Innokin Cool Fire IV / Innokin Cool Fire 4 Express Kit | SmokTek.com
10% code: save10ak7
$35.99 + shipping (reasonable shipping)
Last edited:
- Status
Similar threads
