My MadVapes Nico-Drip V2

[dreams n chains]

Actually, MisterD, we have access to broadband finally..... but my computer keeps stating "Netword cord unplugged"..... Connmans works fine though. Last night I spent a few hours attempting to research and fix it..... but no go. It's a very common problem. So.... I have ordered a USB ethernet adapter. We'll see.

Anyone have a laptop they want to trade for a mod?!!! Working or non-working.... PM me.

The 18650 batteries we have ordered are more for Connman than me..... and more because we want to see them. I'm perfectly happy with the protected 14500 batteries and do not wish to carry around a big mod just because of batteries. I change the battery before leaving for work and then when arriving home.... no biggie. Heck... I used to have to carry my cigs, lighter, empty ashtrays, find ashtrays, etc. Changing a battery twice a day and filling a juice bottle once every two days? Heh... no problem!

Here is the how-to on the lighter brass parts!

The "coleman" lighter is the best one for the actual Lighter use! It is only about $2.44 and holds the most butane out of any lighter I've torn apart! Huge amount of butane! Fantastic lighter! But not for what we want it for. As I have stated before.... DO NOT WASTE YOUR MONEY ON BIC LIGHTERS LIKE THESE! They are horrible! No brass pieces.... and nothing but a blank white BIC lighter inside.... very little butane.... yet they cost almost $4. 8-o

 

[dreams n chains]

So Sci...... my "Ball Peen" how-to will not be included in the PDF File?

And that's the brass pieces.

Any questions... Please Ask!!!

I have noticed that the cart brass piece has a larger hole than my original on my Nico-Drip..... which might be a good thing for others.

EDIT TO ADD:
The album link for the lighter pictures can be found at:
http://s303.photobucket.com/albums/nn150/dreams_n_chains/Lighters/

 

[Vap3rLov3r]

ty vary much for that, that was vary informative, and will deffinately help me in the near future

 

[dreams n chains]

Your welcome Vap3rLov3r.

I've heard you have the same problem with cat whiskers~n~candles that I do?

I forgot an important part to this brass how-to..... gotta drill the adapter out after it has been Marine-Texed together. Chances are that whatever you use to adhere the two brass parts together will get inside the brass tube and need cleaned out.

There we go.
I edited the post and put a picture in.

 

[Vap3rLov3r]

haha yes I do dreamy....and thanks for the edit I know I would have messed something up

 

[Vap3rLov3r]

now I just have to find a way to make the same thing without totally ripping you off down to the brass fittings lol

 

[dreams n chains]

I also want to add in here....

The very tiny drill bits I use can be found in the Dremel drill bit collection of several drill bits in a nice little holder for around $7.

The very small jewelers files I use I bought off ebay for about $10 but they can be bought for around $5 if you wait for them to come from Hong-Kong or China.

 

[Vap3rLov3r]

I do need to invest in some thats for sure im working primatively out of my shed with not so nimble tools

 

[dreams n chains]

now I just have to find a way to make the same thing without totally ripping you off down to the brass fittings lol

No problem with anyone making these... even selling them, I guess. I would only like to see that they get the somewhat generic name of "Nico-Drip" to follow suit with a "Nico-Stick"..... all thanks to "Nico"Wolf.

 

[Vap3rLov3r]

lol sell I would not, I should post some of my mods for simple laugh factor.......I dont even have the right drill bit for a batt conect, being a fan of modding everything my whole life and yet still sucking at it is in itself quite laughable.......you however need to go somewhere with this

 

[dreams n chains]

lol sell I would not, I should post some of my mods for simple laugh factor.......I dont even have the right drill bit for a batt conect, being a fan of modding everything my whole life and yet still sucking at it is in itself quite laughable.......you however need to go somewhere with this

OMG...... are you kicking me out of my own thread? 8-o

Do you need peened Vap3rLov3r?

Have you not heard of my reputation?

..... no seriously...... you've done it........ I've thought about posting a picture of my first attempt at copying Tinears "Mahmba" Mod because I thought it was so beautiful (his Mahmba)...... now I'm going to......

You want laughable mods?!!! This was the beginning of my modding..... back in December, I think, right after I made my first mod the Nico-Stick.

Let me go take a picture and upload it.......



This should be good!

 

[dreams n chains]

Here ya go! For anyone out there who's thinking they suck at modding or tells themselves, "I can't do that"..... here is inspiration for you!

©




Good thing I'm posting this in the middle of the night...... gives me time to pull it before daylight and anyone sees it!!!

No one's allowed right-clicking and saving this! It's umm..... it's uhhh.... Copyrighted! Yeah.... it's copyrighted! © ..... see that little symbol under it?....... ©....... means you can't touch it!

No seriously..... anyone want a how-to?!

 

[MastiffMike]

Here ya go! For anyone out there who's thinking they suck at modding or tells themselves, "I can't do that"..... here is inspiration for you!

©




Good thing I'm posting this in the middle of the night...... gives me time to pull it before daylight and anyone sees it!!!

No one's allowed right-clicking and saving this! It's umm..... it's uhhh.... Copyrighted! Yeah.... it's copyrighted! © ..... see that little symbol under it?....... ©....... means you can't touch it!

No seriously..... anyone want a how-to?!

What'd you use to glue the pipes together? Silicone caulking?

 

[dreams n chains]

What'd you use to glue the pipes together? Silicone caulking?

Epoxy.

You want a how-to?

 

[MastiffMike]

Epoxy.

You want a how-to?

Epoxy? That stuff gets hard and is beyond my capabilities. Now if it was flexible silicone caulk I maybe could handle that!

How-to? I'd love a how-to on ANY mAhmba pv!

 

[dreams n chains]

(snip)

How-to? I'd love a how-to on ANY mAhmba pv!

Umm..... I think you'll regret those words.......

 

[Vap3rLov3r]

well well well temper temper temper, nice mod by the way....hehe.....and I didnt say I can because I can but it would look like the backside of a donkey lol gonna take pics and upload them perhaps start a thread

 

[Vap3rLov3r]

lol sell I would not, I should post some of my mods for simple laugh factor.......I dont even have the right drill bit for a batt conect, being a fan of modding everything my whole life and yet still sucking at it is in itself quite laughable.......you however need to go somewhere with this

hmmm reading back not my best wording lol.....my bad......you in fact to to make some serious cash money off these things

 

[tinear]

Good thing I'm posting this in the middle of the night...... gives me time to pull it before daylight and anyone sees it!!!

too late.





















come on! you were sooooo close!........

 

[tinear]

oopsie... double postie