New ideas
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
-
- Tags
- revolution super t
- Status
Imeo,
I hope you're working on an optional solution to decrease the voltage on the Super Slim...Because 7.2V is too much and almost useless for regular atties...And the solution is really simple and easy...but I won't say anything more...hehe
I hope you're working on an optional solution to decrease the voltage on the Super Slim...Because 7.2V is too much and almost useless for regular atties...And the solution is really simple and easy...but I won't say anything more...hehe
Last edited by a moderator:
xaxaxa I know the solution friend
Gotcha
So I'll be waiting for you to talk to us a little more about it...
Problem remains when one takes out its dropper bottle and start dripping. We look like ill people taking some medicine or like some stuff addicted people. Not cool."
Who are we fooling, nicotine is highly addictive, thats why you cant buy 100% nicotine crystals. I understand what you mean tho, trying not to look like a junkie of some sort.That is important. Have you tried the syringes? maybe carry a spare cart for those situations where filling it up would be less convenient.
"vapnaway: Its a hydrogen cell isn"t it?"
Electrolysis of water creates 'HHO' a hydrogen oxygen gas... dont want to inhale that. HHO makes for a clean flame if anyone id interested in the science. Makes a great fuel for cutting torch. the flame changes temp depending on what metal you are cutting. never seen something like that before.
Another cool thing is when you hold the flame to a piece of steel and then more it away, where a ox y-acetylene leaves black soot because its a petroleum product where as, the hho cutting torch leaves just water vapour/droplets as residue.
sorry to rant. And sorry if i threaded jacked. it was not my intention.
one more thing, does anyone know of a atty that vapourizes at 214-215 degrees Celsius. im developing a medical vapourizer for liquidized medical compounds of cannabis in a Vegetable Glycerin - Ethanol mix of 9:1
if anyone can help in the design or with info or spare parts it would help a lot. thanks
Who are we fooling, nicotine is highly addictive, thats why you cant buy 100% nicotine crystals. I understand what you mean tho, trying not to look like a junkie of some sort.That is important. Have you tried the syringes? maybe carry a spare cart for those situations where filling it up would be less convenient.
"vapnaway: Its a hydrogen cell isn"t it?"
Electrolysis of water creates 'HHO' a hydrogen oxygen gas... dont want to inhale that. HHO makes for a clean flame if anyone id interested in the science. Makes a great fuel for cutting torch. the flame changes temp depending on what metal you are cutting. never seen something like that before.
Another cool thing is when you hold the flame to a piece of steel and then more it away, where a ox y-acetylene leaves black soot because its a petroleum product where as, the hho cutting torch leaves just water vapour/droplets as residue.
sorry to rant. And sorry if i threaded jacked. it was not my intention.
one more thing, does anyone know of a atty that vapourizes at 214-215 degrees Celsius. im developing a medical vapourizer for liquidized medical compounds of cannabis in a Vegetable Glycerin - Ethanol mix of 9:1
if anyone can help in the design or with info or spare parts it would help a lot. thanks
Gotcha
So I'll be waiting for you to talk to us a little more about it...
I will tell you what I meant so you can tell me if you thought the same. We will vape at 7,2 volt. If someone wants to vape at 3,7 then he will replace the one battery with an axis. Thats it. Exept you meant that you want other volts than 3,7
Yes, same principal emonty.
Macta, I mean that we can put a small axis in series with only one battery so we can vape at 3 ,7 volts with the longer GG Slim
Macta, I mean that we can put a small axis in series with only one battery so we can vape at 3 ,7 volts with the longer GG Slim
I was actually more thinking of getting a nice 5Volts vaping with it.
An optional metal pin, that screws on to the tip of the internal extremity of the switch, or on the internal center pin of the atomizer cap.
You put it, then you vape at 5Volts with regular atties. You pull it out, then you vape at something similar as 5V with Imeoatties.
With that, you have the smallest cutest 5V-7.2V device ever produced. A revolution!
hey guys i just had an idea for the atomizer/wick. i was looking at aluminum oxide ceramic air stones for aquariums. the Product Features: As it is ceramic products made by high temperature 1300°C with the pure oxidizing aluminum, it has many pores with an accurate uniformity and that anti-corrosion to the oxides, sea water and ozone. its good for among other things... , ozone generator, medical equipments.
the specific air stone is 30mm x 15mm - 0.6"Φ x 1.2" Cylinder type Ceramic
From Wiki:
Aluminium oxide is an electrical insulator but has a relatively high thermal conductivity (40 Wm−1K−1) for a ceramic material.... its hardness makes it suitable for use as an abrasive.also used as an abrasive due to its hardness and as a refractory material due to its high melting point...
As i mentioned in another thread, i have a feeling that the ceramic will act as a wicking material pulling the liquid through the porous ceramic air stone. i dont know the scientific name for it. i think this could make for a reusable atomizer!! one that couldnt burn out. one that can handle 1300 degrees (tho limited to the batteries) the aluminum oxide ceramic is hard and strong. not brittle. also check out microheaters! on Wiki... think there might be useful info there as well:
"Microheaters are small high power heaters with precise control, that can offer temperatures in excess of 1000C, even up to 1900C.[1] Microheaters provide for accurate high temperature control.."heating method for microheaters involves conversion of electrical work to high density heat"..
"With an increase in usable temperature, microheaters need to be supported or enclosed with very high thermal-resistant ceramic materials often made from small grain, high purity aluminum oxide.
which points me back to the small air stones!
the specific air stone is 30mm x 15mm - 0.6"Φ x 1.2" Cylinder type Ceramic
From Wiki:
Aluminium oxide is an electrical insulator but has a relatively high thermal conductivity (40 Wm−1K−1) for a ceramic material.... its hardness makes it suitable for use as an abrasive.also used as an abrasive due to its hardness and as a refractory material due to its high melting point...
As i mentioned in another thread, i have a feeling that the ceramic will act as a wicking material pulling the liquid through the porous ceramic air stone. i dont know the scientific name for it. i think this could make for a reusable atomizer!! one that couldnt burn out. one that can handle 1300 degrees (tho limited to the batteries) the aluminum oxide ceramic is hard and strong. not brittle. also check out microheaters! on Wiki... think there might be useful info there as well:
"Microheaters are small high power heaters with precise control, that can offer temperatures in excess of 1000C, even up to 1900C.[1] Microheaters provide for accurate high temperature control.."heating method for microheaters involves conversion of electrical work to high density heat"..
"With an increase in usable temperature, microheaters need to be supported or enclosed with very high thermal-resistant ceramic materials often made from small grain, high purity aluminum oxide.
which points me back to the small air stones!
but why to smoke on 5 volts and still burn your regular atomizers when the HV atomizers that I found is better from all angles? Better ( not burning) taste, atomizers that live longer as they are for proper volts and no need to screw anything.
Is there a reason to still try to smoke in 5 volts when we simulate this much better with HV atomizers?
Imeo,
Can you make a small chart with what the voltages will be when using the new 3.7, 6 and 7.2 Volt Imeoatties together with the different voltages.
So for instance:
what Voltage output will give the 3.7V attie with 6 Volt batteries
thank you!
Can you make a small chart with what the voltages will be when using the new 3.7, 6 and 7.2 Volt Imeoatties together with the different voltages.
So for instance:
what Voltage output will give the 3.7V attie with 6 Volt batteries
thank you!
yes emonty
VOLT ATOMIZER WATTS
3,7 i3 4,5
3,7 i6 3
3,7 i7 2,5
6 i3 12
6 i6 8
6 i7 6,5
7,2 i6 11,5
7,2 i7 9,4
VOLT ATOMIZER WATTS
3,7 i3 4,5
3,7 i6 3
3,7 i7 2,5
6 i3 12
6 i6 8
6 i7 6,5
7,2 i6 11,5
7,2 i7 9,4
Last edited:
but why to smoke on 5 volts and still burn your regular atomizers when the HV atomizers that I found is better from all angles? Better ( not burning) taste, atomizers that live longer as they are for proper volts and no need to screw anything.
Is there a reason to still try to smoke in 5 volts when we simulate this much better with HV atomizers?
Imeo,
At 5V the regular atomizer can still take it and have an acceptable life. The thing is that 5V is a widely recognized sweet spot on regular atomizers. But to reach this 5V when you have 2 * 3,7V batteries inside the chamber, you need a resistor.
You did a great improvement, by simply creating the HV atomizers, instead of having to put a resistor. Which basically is better, since not only did it simulate the sweet spot at 5V , but it also improved the battery duration.
But my point is also that the GG is universal. And it shouls address all the market.
Meaning it should be able to provide the best vape, with all available atomizers. And for that purpose, it is important to take into consideration that the standard atomizers still constitute 99% of the atomizers in the market.
So the GG must also have the ability to provide this market, with the best vape.
So the idea is to have a little metallic pin, that you screw , and that works as a resistor, bringing the voltage down from 7.2V to 5V, for those who use the regular atomizers.
And for those who have the HV atomizers, they can unscrew this little resistor and vape.
This way, everybody can enjoy it, no matter the type of atomizers he has. And that would make the GG universal, and at the same time, the slimmest 5V device in the world.
I see what you mean Mist. But now I am focusing to others things as you already know. I am also making a new button. I have so many things in my mind so I have to give a priority to them and then its easy to make what you say.
Maybe your idea is very good but my poor english dont let me full understand what you said friend
- Status
