OK, I just got to the end of this thread. wheeew this one is as long as Raidy's. but thanks for the invite to your party.
NEW RoyalSmokers C-E2 R4 Review, Tips, Info, Help, Video
- Thread starter badkolo
- Start date
- th_trl_thread_readers 0
- Status
Funny how a concept that both you and I have mentioned is now real life and in your hot little hands. So what the 411 on them?
the tank is extra small , i guess this was done to keep it like a real cig size and it look slike it can be made bigger if they wanted to.
the center posts doesnt stick out so not all mods will fire, this seems to be on all of these and even on the ausie site.
the ohms are rather high. filling them needs to be done with a needle, possibly with a bottle but a needle is needed but i need to test that to see whats best. any bottle with a thin tip might do or a dropper would work as well
im filling it and testing it, i will say whil ethis one is small becuase of the tank, the system itself is rather slick, simple, super simple and rather slick
the center posts doesnt stick out so not all mods will fire, this seems to be on all of these and even on the ausie site.
the ohms are rather high. filling them needs to be done with a needle, possibly with a bottle but a needle is needed but i need to test that to see whats best. any bottle with a thin tip might do or a dropper would work as well
im filling it and testing it, i will say whil ethis one is small becuase of the tank, the system itself is rather slick, simple, super simple and rather slick
Last edited:
Looks like silica wicking there in that nozzle. I'm not so concerned about small tanks - it looks like you could get a good half-day's vaping outta a full one of these and if it's possible to have a pocket full of them to pop in... it's no probs.
the slits at the side of the atty are the airflow, that is wick in the stem chamber.
My idea was to go with something like this only in eGo diameter. Hey Bad, wouldn't it be a trip if they got this idea from some of the stuff you and I posted in the "Big Thread" way back when.
Need more info on vaping performance. I didn't call in sick to work today for nothing did I. What is your first impression?
I agree...Rod says they are .7 ml capacity on his user group announcement even though these appear to be marketed as .5 ml...
Cowboy? Dang. Well roll me in corn meal and fat fry me. Them thar are fighting words.
Well shucks. It looks like it has a wick. If so, I see potential problems already about making a larger tank for it.
BR - looks like it would be difficult to increase the actual juice flow into the atty - but surely you could plug that nozzle into any size bottle you like (as long as it has a suitable air passage around it).
speeking of "potential problems" how's the two coiles in series working br? getting gunk
According to the upside down E2 that I made, it worked okay with a small amount of juice in it. When I increased amount, it flooded the atty.
so far thick juice like octane aint working well, it doesnt wick fast enough, i removed the wick completly but still getting a burnt taste.
it worked for a minute then it got dry, then i let it wick and it worked then it got dry, i like the idea and the system should work but im gonna check whats wrong, i think the stem gole for juice is either to small or only thin juice can be used
it seems to be dependent on that wick , maybe thinnner juice will run t=down to the stem but thicker juice doesnt, if its wick dependent then i see how to fix it but that means modding it.
as of now without the wick its not vaping. with the wick it gets to dry to fast. this is pg octane juice form nhaler.
im going to disect it to see whats the issue
it worked for a minute then it got dry, then i let it wick and it worked then it got dry, i like the idea and the system should work but im gonna check whats wrong, i think the stem gole for juice is either to small or only thin juice can be used
it seems to be dependent on that wick , maybe thinnner juice will run t=down to the stem but thicker juice doesnt, if its wick dependent then i see how to fix it but that means modding it.
as of now without the wick its not vaping. with the wick it gets to dry to fast. this is pg octane juice form nhaler.
im going to disect it to see whats the issue
At this time, the gunk does not seem to be less when operated at a lower voltage. I'll still do some more testing though. I have so many different test examples going on right now that I am going through gobs of juice and staying doped up on too much nicotine.
I made one yesterday using a inverted 510 connector. You need a bottle to go over the bottle. so I stuck a 3mil bottle inside the BR 10 mil bottle mod and you end up with this big ugly .... looking dripper. :>)
Seems like there is a built in limitation when cartos are made to the 510 diameter. I think designers need to do is move their thoughts to the eGo diameter.
Bigger wick. Bigger Coil. Bigger Tank.
- Status
Similar threads
- Locked
