But if you turned the bottle around or had one of those double header bottles that's been talked about the 2 way vacuum valve would work.
NEW RoyalSmokers C-E2 R4 Review, Tips, Info, Help, Video
- Thread starter badkolo
- Start date
- th_trl_thread_readers 0
- Status
I use 100%vg with both stock E2's with ptb and tubes without ptb. Never had a problem with either. Perhaps the extra vapor from vg makes up for the difference? All of my problems went away after I started torching the wicks especially at the slits. Dry burning can't get that out of there. Thanks for that BR!
heres the real bad part, the tan is very small on this tankomizer, so when it gets a little below the halfway point you start getting even more dry spots so then you have to refill it again so the small tank is a issue but when it hits it hits well now.
its still inconsistant though and ill let the others i send them to play around.
its still inconsistant though and ill let the others i send them to play around.
Bad I have two coming on Monday...did you need to mod the tankos to work on your Hello eGo or whatever you used?
cutting the cartos isnt all that hard at all using a small pipe cutter.. its thens makes it possible to use teh syringe mods which i blieve is everyones second favorite next to the 'BR MOD" of course....
did that.. one pic is the "wick" other is inside carto look close you can see "wick" laying across coil. Wedged it into cup slots and fed it down both sides.Can't wait to try it on a syringe mod. ( if the damn things will ever get here)
oopps "wick pic was wrong pic.
Attachments
Last edited:
I use a tube mod so the entire R4 stem is accessible. I don't know if it's possible to sufficiently burn off all the residue on the wicks if they're in the stock tube. I lift the wicks above the slits and torch from beneath until the wick is red hot. I also torch the whole strand, but in my opinion, the main issue is at the slits in the cup. I do that after every 10ml or so. I'm no longer getting black discoloration at the slits even with oil based flavors. Works for me.
im using this vapure vanilla vg and im shocked how well it works and how great it taste.
oh hehe, in a br bottle mod, its vaping so well and its 100%vg, taste really good and its not gunking up badly at all. very pleasently suprised and the funny thing is the store a few blocks from my house sells it. he started selling vapure products and thier juice, totally overpriced but now i know in case of emergency i can nab some good juice there.
I gave up on the tankomizer atomizer set up, it started to flood and then leak out the battery end, its way to finnicky . its got along ways before its ready.
i made a few e2 syringe and bottle mods today and they are working like a champ so i couldnt be happier
I gave up on the tankomizer atomizer set up, it started to flood and then leak out the battery end, its way to finnicky . its got along ways before its ready.
i made a few e2 syringe and bottle mods today and they are working like a champ so i couldnt be happier
I'll get mine in tomorrow and put it aside until I get the promised 'specialty' ego...
you can get it to work, i dont know how many mods or batteries you have but it might work on one of them and if not you can use the staple mod to make the connection
the only thing thats special about that ego is those scum designed the connection to work with that atty
the only thing thats special about that ego is those scum designed the connection to work with that atty
They extended the contact...just that alone makes you very suspicious of their whole enterprise...
i dont know how anyone could sleep at night selling this thing at anything more then 1.50 a pop and thats still much.
Sitting around bored and had an r3 sitting there so i cut it apart and threw a 15ml bottle on it. I don't know why i didn't try the br...I mean bad 
mod sooner. That is really something!! Really didn't think it would make that big of a difference. They need to make the E2's just a little bigger and I think it would have a big effect!!
mod sooner. That is really something!! Really didn't think it would make that big of a difference. They need to make the E2's just a little bigger and I think it would have a big effect!!
I do a lot of my testing with a pass through connected to a variable power supply. I can't buy a pass through that is made for this kind of thing, so I have to make my own. With all the bottle craze going on, just for grins I made my last one in a bottle. It is shown here with the twin wick and coil version that I am currently testing on 5 volts. It may look awkward to you, but the button placement and bottle shape is comfortable in my hand.
Is there a ship in there, too?
Is there a ship in there, too?
The ship in the bottle thing came to mind while while making it, heheh.
Why are these so hard to find in anything higher than 2.5 ohm. Everywhere is out if stock!!
champions,
Travis at Vapor Junction at this link has stock of Stainless Steel E2's as I write this and they are all 3.0 Ω. Coupon code ECF10 gets 10% discount. I believe he currently is charging $5.56 for USPS priority shipping. The site shows the shipping and the coupon discount before you check out completely.
I assume you know Clouds of Vapor E2's has some stock, depending on which thread, length and Ω you are wanting.
Tim
- Status
Similar threads
- Locked
