What do you polish the contacts with? I'll try removing the bottom spring to see if that helps.
Sent from my EVO using Tapatalk 2
Odysseus official
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
-
- Tags
- halo madvapes provari revolution
- Status
What do you polish the contacts with? I'll try removing the bottom spring to see if that helps.
Sent from my EVO using Tapatalk 2
My GGTS is all SS. I'll try the pencil earaser for now to see if that helps.
Sent from my EVO using Tapatalk 2
I use a very small buffing bit on my Dremel then wipe off the contacts using Iso Alc on a Q-tip. ... and it works quite nicely at that.
Peace-
so has anyone found a supplier for the right size wick. I thought 1/8 inch was close to 3mm. found out that it is about double the size. correct me if i'm wrong i would need 1/16 inch to be close to 3mm.
1 /16 would be closer to 3mm than 1/8 is ..... so you would be correct.
Sift through eBay - you can find some in there....or just search the web for "Rope Gasket" - you'll find what you need.
Guys I have tried and tried and just can't get it. I am thinking of just selling my Oddy :/
Elaborate what is the problem you are having, i assume your not being succesfull in setup ? if thats the issue its best you tell use how are you doing it and if will be best if you can post pictures of each stage specially the how you are doing your wires because using the pre-made ones from cov you cant have a problem other than your not using the correct channel for each wire.
Let us know
I would recommend either making a video or taking pictures of each step in assembly. Including made coil not wrapped around wick. Coil wrapped around wick, coil and wick in top of ceramic before putting the wires and wick in the channels ect ect. We may be able to spot what is going wrong.
a video would help for sure arc. Your problem is very strange but I am sure the solution is very simple. You have a short but without a video we cant understand what you do wrong there
ps.... maybe its not you but your ceramic for example is wrong (with a big hole in its botton) so center pin contacts the ceramic housing, who really knows
ps.... maybe its not you but your ceramic for example is wrong (with a big hole in its botton) so center pin contacts the ceramic housing, who really knows
Last edited:
0.7Ω is the lowest that I'd suggest going. In my experience with Ody, you're better off not bothering with a Kick and it performs much better at wattages greater than 10.
What part of CA are you? Instead of video or pics finding a local GGer would be best.
Last edited:
I really can't throw in the towel yet, until I get my hands higher gauge kanthal, some 36g or even 34g Kanthal, which are both hard to obtain right now. The only thing that I can think that is shorting my coils out is they are possibly touching each other in some way or form. But let me tell you, I have tried everything. I've tried making <2ohm coils, >2.5ohm coils, and even 3+ohm coils. Of course, the higher I go in ohms, the more chance of the 32g Kanthal has of the coils touching. Everything is always okay, till I screw in the housing into the oddy base. Perhaps I will make a video during my spare time.
I have a question too. when using NR and R wire (not premaid) are the twists in the channel or above it in the ceramic cup?
I was having the same problem and used my last premaid wire and got it to work.
Last edited:
ARC ...sounds like plastic o ring not insulating centre pin or you running wrong end to live? gauge of wire or ohms wont make any diff and if your coil wraps were touching it would still work just burn hotter one side sure you will get there in the end
What's up all Just wanted to say I received both my Ody and Penelope a week or so ago and I am totally in love with both of them Thanks Imeo, you've made some incredible rebuildable atomizers that produce awesome flavor and vapor production...AND THEY DON'T LEAK !!!! 
Just wanted to say I received both my Ody and Penelope a week or so ago and I am totally in love with both of them Thanks Imeo, you've made some incredible rebuildable atomizers that produce awesome flavor and vapor production...AND THEY DON'T LEAK !!!! - Status
