Official ProVari Radius Thread
- Thread starter Vape360
- Start date
- th_trl_thread_readers 0
- Status
Welp.... I bought one of each of the below. I'll post up pics/etc of how they fit once the Radius comes in. It's gonna feel like a year til the thing comes!
https://vapesox.com/shop/vs4-cat/vs4-digi-camo-acu/
I was left wanting something to hold the other side up. Good luck!!
https://vapesox.com/shop/vs4-cat/vs4-chocolate-faux-leather/
Sent from my SM-N920V using Tapatalk
Haha - I figured it out. I'll likely remove the clip and just pocket it most of the time. Hopefully it'll work out.
Sent from my SM-N920V using Tapatalk
Not to derail the RADIUS thread, but I've used a KayFun v4 exclusively from release. I love it. How does the Kabuki compare with flavor? How do the nautilus coils compare? I'm thinking about picking one up.
I have recently had this conversation with a friend who loves his KayFuns... (I have KayFuns also)
My response... Nothing beats (IMO) a perfectly built KayFun at it's peak.
But the Kabuki is easier (less Fiddling), and it seems in my short time of usage very close. So close in fact that I will buy the P3 Version Kabuki again.
Cheers, Jim
Quoted for not being antagonizing, and more importantly, TRUTH!!!
As a very HEAVY Kayfun user, plus I use Kayfuns a lot (cue rim shot), and I can say that my Kabuki has been in regular rotation with my Kayfun 3.1's, KFL+'s, and my KF4...and this little 'buki keeps up with the best of them!
My only wish, is that there was a rebuildable version of the coils, or one that was around 1.2-1.4 ohms. But that's not a flaw of the Kabuki...no it's not!
I bought something similar and cheaper from Gearbest. Probably not made with the same quality materials, just wanted to try it out. I like them for going out and about when I'm not carrying a purse.
Welp.... I bought one of each of the below. I'll post up pics/etc of how they fit once the Radius comes in. It's gonna feel like a year til the thing comes!
https://vapesox.com/shop/vs4-cat/vs4-digi-camo-acu/
https://vapesox.com/shop/vs4-cat/vs4-chocolate-faux-leather/
Sent from my SM-N920V using Tapatalk
Wish they made a poly tank option! I'm known for occasional drops.... My 3 year old daughter will help cause this... Haha
Might have to get one now anyway on all these recommendations!
Sent from my SM-N920V using Tapatalk
I couldn't agree more. The Crown AFC...people rave about it, but mine is constantly moving since I bottom fill (to avoid leaks) and you can't help but grab onto it..I even had it separate from the base, when I wasn't paying attention, and empty the tank contents all over my mod. Since I have the black version, it's hard to see the setting unless it's under perfect lighting and I use my reading glasses. So instead, after each filling, I have to suck on it and feel my way back to my normal setting...a bit of a PITA.
In contrast, I set my Lemo Drop's airflow once, 10 months ago, and I forgot that it even has an AFC. For those unfamiliar with the Lemo (V1), the AFC's location is similar to the K4's.
I own the 510 and P3 Kabuki. I did have some problems at first with the P3 version. User error. I own an itaste vtr, Provari 2.5 and P3 Ti. I think the P3 kabuki and Ti are the best you can get. It is so comfortable to vape. The Kabuki unlike other air control systems can be adjusted the tiniest amount. A problem for me though I am senstive to nicotine. I got used to the Kabuki and can't handle my Kayfun V4 and other tanks. The kayfun V4 is the only I miss. The BVC coils aren't as efficient with the nicotine as the rebuildables. Thats what I have come up with. I haven't bought any other tanks since the Kabuki. I want to see them top the kabuki Ti combo. But if they can't I definitely won't be sad.
To be fair, the Crown AFC isn't really sloppy or lose, but it does jut out so you can't avoid grabbing it (and moving it) when taking the tank off of your mod. For me anyway...
Please try this: Fill from the top BUT do NOT overfill. Works every time for me. No leaks. No futzing or putzing with the AFC. Most leaks are caused by overfilling. Watch the level of the juice and when it STOPS rising via a little dribble it's holding as much juice as possible so that's your visual cue to stop filling. EDIT: remove it from your mod by turning/holding the glass tank. This assumes you properly assembled it and all your O rings are kosher.
HTH
I'll say this.... When I got the demo Radius last week and put the Kabuki on it, the thing hasn't left my hand since. There's more power than I'll ever need, flavor is amazing, and FINALLY, no need to carry extra batteries.
I leave the house with exactly ONE mod... ONE tank and a bottle of juice. There's a box of Nauti coils in my glove box just in case.
With over six years of vaping under my belt, and owning a MASSIVE collection of gear, I can actually say for the very first time, I'm content and confident.
ProVape knocked this one out of the park. SURE.. it's not for everybody, but maybe some of those "everybody's" would rethink the way they vaped if they had this combo.
Congratulations on a job well done to Vape360 and Crew... what a pleasure it is to use this combo!
I leave the house with exactly ONE mod... ONE tank and a bottle of juice. There's a box of Nauti coils in my glove box just in case.
With over six years of vaping under my belt, and owning a MASSIVE collection of gear, I can actually say for the very first time, I'm content and confident.
ProVape knocked this one out of the park. SURE.. it's not for everybody, but maybe some of those "everybody's" would rethink the way they vaped if they had this combo.
Congratulations on a job well done to Vape360 and Crew... what a pleasure it is to use this combo!
Please try this: Fill from the top BUT do NOT overfill. Works every time for me. No leaks. No futzing or putzing with the AFC. Most leaks are caused by overfilling. Watch the level of the juice and when it STOPS rising via a little dribble it's holding as much juice as possible so that's your visual cue to stop filling.
HTH
I tried that....resorted to filling it only at about 70% but I still got leaks. Since I have no problem with the concept of bottom filling, and I think it's great that the Crown gives you the option, I abandoned top filling.
In fairness, I didn't get the leaks when I experimented with the pre-maid coils that were included...maybe because they are packed tightly with cotton. However, I bought it for the RBA, and that's when I experienced the top fill leaking issues.
I think Svoemesto had the right idea with that indentation on the top cap's threading.
I think I am going to stay as lite weight possible when It comes to vaping. Thats whats comfortable to me. I am looking forward to trying the Kabuki Radius combo. I am content with what I have now. But I just want to see if it can be improved. Also I am a Provape fan mainly because they are the best as far as safety goes. The horror stories is what kept me from vaping in the first place.
Zen is there any plans for a Kabuki that takes Aspire Atlantis coils?
I need a sub ohm tank with P3 threading.
- Status
Similar threads
