Now i have no idea how my two coils ended up at 1Ω.
Hang on - ok I know they were 8 wraps each 2.5mm so -- oh wait I used the coil engine dual coils and put resistance at 1Ω and it said 8 wraps and i was thinking each coil was 1Ω and the two together in parallel would get me to 1Ω.
So what was the resistance of each of my two coils to get to the 1Ω total.
Sure this must be easier once you have grasp on it.
Right, 8/9 wraps of 29gauge Kanthal at 2.5mm is 2Ohms. Two 2Ohm coils in parallel nets out at 1Ohm.