PDIB's Making MODs!

[Aal_]

"best flavor" and "most amplified/enhanced flavor" are 2 different things really, but yeah most will say that the more flavor enhancement the better which is why the rm2 has always been so highly regarded.

on that note though I will add that personally I think there is such a thing as too much enhancement in some cases. I made a chamber reducer for my cyclone with afc and by playing around with various increments of chamber size and with some juices and with the smallest chamber size it can get to be just too much. some juices I open it up just a bit and it affects the flavor big time. also reducing the chamber I no longer need to run duals in the cyclone with afc I can get great flavor and even too much flavor with just a single coil even. chamber size is a big factor. adjustable chamber volume is very effective to dial the flavor in, surprised there aren't any atties with adjustable chamber size. adjustable airflow and chamber size really lets you dial in the vape so much, both make very dramatic changes to the vape and combined they really make for a wide range of tuning ability

Agreed, with El-Kamino, if I enhance the flavor too much (dual coils on some atties) the flavor becomes so strong to the point where it is unbearable. That is why adjustable everything is very important. YMMV.

 

[Alexander Mundy]

Kinda like YMMV kind of thing.

I'm such a sour puss that I gots ta have my sweets.

Edit: ninja'ed

 

[ValHeli]

that config is currently a genesis style. I'm working with the manufacturer to make it a cyclone deck and (hopefully) a top cap that Pdib designs. Once I've established a successful working relationship, then we'll push through with a customized "wish list" atty

Bottom fed version screw adjustable AFC without the tank. I'd be interested. Looks like the small chamber would be great for flavor.

 

[malkuth]

How much, and what's the diameter? I'm looking for a nice tank at a decent price for my microstick... I already have the bf for the dibi...

I was thinking about getting a Spheroid, is this 16mm or smaller in diameter?

I think the perfect BF RBA and one I'd pay top dollar for would be something with a center feed hole like a Chalice, Wide post like an RM2 and air flow control like Cyclone with AFC cap that has a smaller internal chamber like a Divo.

that config is currently a genesis style. I'm working with the manufacturer to make it a cyclone deck and (hopefully) a top cap that Pdib designs. Once I've established a successful working relationship, then we'll push through with a customized "wish list" atty

I would be interested in this as well, depending on cost. I also like the ceramic deck on the RM2.

 

[ValHeli]

I would be interested in this as well, depending on cost. I also like the ceramic deck on the RM2.

As much as I also like the ceramic deck, that is not a possibility at this time due to sourcing. Best I can do for now is a food grade SS, cyclone deck, and screw cap adjustable AFC. Price still in the works, I'm not in this for profit so all you guys w/ dibs for a Dibi in the production run will get it a lower price compared to a cyclone bought in the US. If this process works, and I break even, then we'll work on a custom atty.

 

[2pak2zero]

As much as I also like the ceramic deck, that is not a possibility at this time due to sourcing. Best I can do for now is a food grade SS, cyclone deck, and screw cap adjustable AFC. Price still in the works, I'm not in this for profit so all you guys w/ dibs for a Dibi in the production run will get it a lower price compared to a cyclone bought in the US. If this process works, and I break even, then we'll work on a custom atty.

Definately interested to see what you come up with. Thanks for your efforts Val.

 

[ValHeli]

don't thank me yet.. LOL .. my goal is to get this thing rolling while I'm here in the Phil. and to hopefully get this to you guys by run #5 or 6. If this is successful then you can expect to see an exclusive atty by prod run 11 or 12

Definately interested to see what you come up with. Thanks for your efforts Val.

 

[malkuth]

As much as I also like the ceramic deck, that is not a possibility at this time due to sourcing. Best I can do for now is a food grade SS, cyclone deck, and screw cap adjustable AFC. Price still in the works, I'm not in this for profit so all you guys w/ dibs for a Dibi in the production run will get it a lower price compared to a cyclone bought in the US. If this process works, and I break even, then we'll work on a custom atty.

My Dibi OliveR is in group 2, so I am looking real hard right now.

 

[pdib]

He had concerns about magic being too big but thought he might have a solution.
I hope he finds it, looking forward to that also.

don't know Jasl90's Micro-Gen?, and yeah mundy your obviously a serious flavor kinda guy lately I'm finding that I don't really like too much flavor. I like tweaking it and adjusting it but I like to start out with either flavorless or flavorless with just a little flavoring added. most store bought flavors are now just way too overpowering to me. I'll now take 10% of a store bought juice mixed with 90% unflavored and even that to me gives great flavor and is more than enough for me

When we were talking about it, I went out to the shop and took a few measurements of an older version Micro-Gen that he had made for me. I thought I saw ample clearance for the ~1mm thickness of the Magic.

T-cad: Jasl makes these super small chamber atties that are designed to be a Genesis style (post/vert wick) dripping atty . . . . . housed in a carto tube. He's making up some bottom feed versions, and I was saying that I really wanted to try it with MM. Here's his thread . . .

http://www.e-cigarette-forum.com/forum/atomizer-mods/377820-micro-genesis-dripping-rba.html

http://www.e-cigarette-forum.com/fo...make-micro-gen-smallest-genisis-atomizer.html


Since it's bottom fed, he's shortening it to the minimum height that still allows for wrapping a coil without too much cussing.

 

[MasterofNone]

Jasl I'd love to know when these bottom fed versions will be available. Not for my Dibi though... I know I just sold one, but I think I might get another vmod as a knock around device for when I'm going to my sons sports practices ( do a lot of running and awful physical crap lol) and I want something with me I couldn't care less about, in case it gets destroyed but I needs my rebuildables lol
How did this happen? Ha


Sent from my iPhone using Tapatalk

 

[ukeman]

those icon designs look like the Prometheus (dual coil genesis) but Vicious Ant makes the Cyclone afaik, and the Kraken, or was it te Aqua… anyway these are high end and very popular… which leads me to this;

there is currently a dearth of b/f atomizers for us and thats because up to now, no one has had b/f devices that can handle sub ohms.
Norbert, who makes the Origen RDA has a b/f device (dna). Vicious was good enough to make the b/f Cyclone [ up til now all b/f atomzers had drip wells so limited to teeeny for small diameter] Chalice, ERA et al

you're talking big $ (for r&d etc) …. but i know this is a discriminating consumer crowd here and you all want it done right!

… That's right, it's the V1 and the V2 has the b/f option… Where'd u get yours from Uke?


Anyway, I'm in the Philippines right now and in my search for a gold cyclone, I bump into one of the guys who has the patent on the cyclone and era hornet. He was showing me his new Gamma tank V2 which he calls a hybrid dripper / bottom feeder:

The topper comes with its own AFC by simply screwing on/off the cap for air. I asked him if he can make me a plain bottom feeder version and he said no problem. Question is, would you guys be interested also?

 

[ScandaLeX]

Jasl I'd love to know when these bottom fed versions will be available. Not for my Dibi though... I know I just sold one, but I think I might get another vmod as a knock around device for when I'm going to my sons sports practices ( do a lot of running and awful physical crap lol) and I want something with me I couldn't care less about, in case it gets destroyed but I needs my rebuildables lol
How did this happen? Ha


Sent from my iPhone using Tapatalk

Wait..... Didnt you sell your REO as well?..... To me it's the perfect "knock around device"!

And you sold a Dibi? Somebody PLEASE pick me up off the floor before MoN makes me have a heart attack!!!!!!

Sent from a BIG phone.....Galaxy Note 3

 

[MasterofNone]

Wait what? Lol
A) no I didn't sell a Dibi. Lol. For shame I would never! I'm trying tonvert my collection to primarily to wood
B)I sold A Reo to fund my woodvil purchase tonight. Haha Clara ( my black wrinkle/ copper vein) is home safe and sound.

The two on the right were sold ( Brenda and Serenity)

Sent from my iPhone using Tapatalk

 

[MasterofNone]

I care about Clara too much to consider her a true knock around device ha. I want something that I DONT CARE if I lose or drop or throw as a weapon lol


I'm mostly just talking though. Don't know if I want to deal with that thing again ha

Sent from my iPhone using Tapatalk

 

[cecsystems]

I care about Clara too much to consider her a true knock around device ha. I want something that I DONT CARE if I lose or drop or throw as a weapon lol


I'm mostly just talking though. Don't know if I want to deal with that thing again ha

Sent from my iPhone using Tapatalk

So what you are really saying is... Bla, Bla, Bla, Bla, Bla, Bla, Bla, Bla, Bla, Bla, Bla, Bla, Bla, Bla, Bla Heck no... Not my Lilly... Bla, Bla, Bla, Bla, Bla, Bla, Bla, Bla... vmod Bla, Bla, Bla, Bla, Bla, Bla, Bla, Bla... jk, I couldn't resist... love you mon.

 

[ukeman]

Jasl I'd love to know when these bottom fed versions will be available. Not for my Dibi though... I know I just sold one, but I think I might get another vmod as a knock around device for when I'm going to my sons sports practices ( do a lot of running and awful physical crap lol) and I want something with me I couldn't care less about, in case it gets destroyed but I needs my rebuildables lol
How did this happen? Ha


Sent from my iPhone using Tapatalk

you sold a Vmod right?
and i guess you don't seem to venture into sub ohms territory much (yet) so your Vmod and Reo's will have no problems with that…
i agree Reo metal is "the" knock around of all knock arounds" unless you are talking price: vmod 2 for $60? heheh.

I can remember the days when 1.5 ohms was "oooh! be careful! this vaping thing has been so fast and comprehensive that 3-4 years seems like a lifetime ago.

 

[Alexander Mundy]

It is illegal to sell your Dibi in most jurisdictions,
and you have to have a license in others.

 

[MasterofNone]

Yea I did sell a vmod.
And yes I did mean price wise lol.


Sent from my iPhone using Tapatalk

 

[ScandaLeX]

Wait what? Lol
A) no I didn't sell a Dibi. Lol. For shame I would never! I'm trying tonvert my collection to primarily to wood
B)I sold A Reo to fund my woodvil purchase tonight. Haha Clara ( my black wrinkle/ copper vein) is home safe and sound.

The two on the right were sold ( Brenda and Serenity)

Sent from my iPhone using Tapatalk

Whew!!! Catastrophe averted. The 2nd sentence in the post I quoted read to me like you sold a Dibi.
Don't scare me like that NO more!

Sent from a BIG phone.....Galaxy Note 3

 

[pdib]

I sold a dibi . . . . . ..



won't happen again . . . . . sorry