PDIB's Making MODs!

[ScandaLeX]

I like that he makes these with a SS core and would love to have a Dibby version with a larger bore. Here's one I have waiting for a Dibby mod.


View attachment 296662

That is truly gorgeous!!!!!

 

[ScandaLeX]

Ha - it's true - I'm an aesthetics hound by my own admission. But come on, all the viscosity, laminar flow, capillary action, and Poiseuille chat needed some girling up.

I wouldn't mind throwing a temper tantrum for a matching drip tip!!!!

 

[pdib]

I don't. All I see is color but I'm ok with that. Some people like yourself have the ability to see beyond or within.
I figure it really wouldn't matter what I see within; it's not going to look like that once P'Dibby chops it to hell anyway.

dust off the sign hanging outside my shop . . . .

"Deadwood Torture and Butchery"

 

[lisancentraltx]

No temper tantrums, please... Just be patient and let the man get to it... He's certainly bogged down with the mechs and now he's getting slammed with requests for drip tips and he's volunteering to do toppers

Dibby's got high expectations on the amount of time in a day, eh? =] A formidable enterprise I would say... the need is there, with each of us... give us MORE, MORE, MORE LOL

I'll wait for them... 3 months for the mech... and longer for the rest This Dibby will be my only high end mod I suppose... Goodness knows I didn't blather on and on about the Provari XD

 

[gdeal]

On the "me modding atties for some of y'all" front . . . . . I'm considering ordering a small batch of "starter atties". Y'know, IGO-S type thing. I've heard, in the past about a couple others from Fasttech. YK-somefin'-somefin' . . . .. . Phoenix V#2,723 1/2. . . . In any case, if anyone would be kind enough to suggest a nice, reliable, basic model atty like that. Not too expensive, so that I could ask a few bucks for modding them, and the Peep (end user) isn't breaking the bank. What was that YK-somefin'-somefin' one?

Lemme know if y'all find something.

Here are a couple......very reasonably priced.

$4.88 A6 Mini Rebuildable Dripping Atomizer at FastTech - Worldwide Free Shipping

$4.99 Phoenix V4 Detachable Dripping Atomizer (1.2ml) - 1.0

 

[ukeman]

These are very classy looking … good idea to consider the right d/t…. my b/fs are mainly relegated to the vehicle for road vaping, but when at home i drip them to save having to refill the bottle so often.

The wooden drip tip does not appeal to me... I just don't feel comfortable with having the interior of wooden tip getting coated with moisture and juice for an extended period of time... My other drip tips can be cleaned regularly with no harm, a bit of a soak in an alcohol, a scrub, a rinse and good as new. I do have 2 magnificent drip tips on order that I intend to use with my Dibby:

 

[MasterofNone]

I agree they are VERY classy... Where did you get them?

 

[ukeman]

dust off the sign hanging outside my shop . . . .

"Deadwood Torture and Butchery"

send the wood to Woo's pigs kind of thing? shivers

*has anyone discussed the Divo b/f by VA?
Divo RBA - Cyclone Rebuildable Atomizer & Accessories

 

[turbocad6]

I got a divo and drilled it for BF, nice little atty, very similar to the cyclone but slightly smaller chamber... I use divo for single coils and cyclone for duals...

 

[ukeman]

page says you can order b/f!
i guess you got to it before….. they come in colors too no?

I got a divo and drilled it for BF, nice little atty, very similar to the cyclone but slightly smaller chamber… I use divo for single coils and cyclone for duals…

 

[ScandaLeX]

No temper tantrums, please... Just be patient and let the man get to it... He's certainly bogged down with the mechs and now he's getting slammed with requests for drip tips and he's volunteering to do toppers

Dibby's got high expectations on the amount of time in a day, eh? =] A formidable enterprise I would say... the need is there, with each of us... give us MORE, MORE, MORE LOL

I'll wait for them... 3 months for the mech... and longer for the rest This Dibby will be my only high end mod I suppose... Goodness knows I didn't blather on and on about the Provari XD

I'm not far down in the queue so I have to beg now before it's too late.

 

[Filthy-Beast]

I got a divo and drilled it for BF, nice little atty, very similar to the cyclone but slightly smaller chamber... I use divo for single coils and cyclone for duals...

So is Indy vapor wrong when they say 22mm? because that would make it as wide as my Patriot.

 

[turbocad6]

I've not seen the divo in colors, only the cyclone. I got mine a little while ago from a german vendor and I don't think they made these BF at the time but then again I bought my cyclone as a non BF too because I wanted the AFC combo which still isn't available as a BF far as I know. the only difference between BF and non to me is ~ 5-10 minutes of my time

 

[turbocad6]

and yes, 22mm is way off, it's more like rm2/igo-s size, ~14mm

 

[Filthy-Beast]

I'm not far down in the queue so I have to beg now before it's too late.

FOUL! Back of the line with you. Everybody else move up one place.



J/K

I can dream about getting bump up the list can't I

 

[turbocad6]

here's both side by side, cyclone is on an 18mm base, divo is on a 14mm base

 

[Filthy-Beast]

Does the AFC cap fit on the Divo?

 

[glassgal]

Buttons, button covers:

. . . . buttons can be readily switched out. There's a structural section and a cover. The cover needs to meet quite a few requirements in order for the whole assembly to work properly. I spent some time exploring options and looking at a variety of materials and shapes. I ended up going with a matching button (matching the surrounding top cap material) as a way of practically/physically meeting all the structural/functional requirements and I chose to "blend" the button rather than Kitsch it out. This, from an aesthetic standpoint, was driven by the fact that mod body materials vary greatly, and are intended to be the "main attraction". Furthermore, the way I have the button done, when one chooses matching caps of their own custom material, with my method, I can make the button to match the body and caps. My thinking was, that if someone got a wild hair, and wanted to fabricate their own button top, I could provide them with the structural elements, and they could fabricate/shape and apply their own.

Some of the requirements of the button topper are that it fit smoothly in the 1/2" hole surrounding it and operate smoothly like a piston in a cylinder. Also, that it never leave the hole completely when not engaged (again, you wouldn't want your piston running past the end of your cylinder). This requires that the button cap be hollowed out on it's underside. So, ultimately, you want a button cap that's <1/2" in diameter, 1/4" tall, and it's underside needs a 3/8" diam. hole that's 1/8" deep. Then you order a replacement stem/structure from me (or get one at the hardware store and machine one end of it down to < 3/8") and do your wackiness.

OK! I get it now!!! LOL!

So the button that's there comes out, and we can order a replacement for the button that comes out from you and do our own wackiness once we get it!!! I thought we had to send it to you and drive you nuts with yet another thing, so I'm really glad to hear that we can just swap it out on our own!!!

 

[turbocad6]

nope, the base of the cyclone is slightly larger

 

[Alexander Mundy]

I was curious about this one $7.43 Vortex Style Rebuildable Atomizer at FastTech - Worldwide Free Shipping

Can't find a pic of the internals though to see how hard it would be.
If I could just rotate that middle shot.