It was a DARK blue wood. There was no indication of purple or Teal in it.
Mines the top half. Vals is the bottom half.
Last edited:
PDIB's Making MODs!
- Thread starter pdib
- Start date
- th_trl_thread_readers 0
- Status
It was a DARK blue wood. There was no indication of purple or Teal in it.
Mines the top half. Vals is the bottom half.
hey... I see you all still sniffing at the woods... jeez you lot have wayy to much money... I cant even afford to throw logs on the fire... I was gonna go next door and ask the neighbour if I can pinch a half burnt log or something for my Dibby hahahaa 
...pmsl
uhm Filthy I been watching your spending spree's.... and I need adopting
...pmsluhm Filthy I been watching your spending spree's.... and I need adopting
It was a DARK blue wood. There was no indication of purple or Teal in it.
Mines the top half. Vals is the bottom half.
can I take the middle
It was a DARK blue wood. There was no indication of purple or Teal in it.
Mines the top half. Vals is the bottom half.
Yours came out so dark ... but in your pix, it looks way lighter. So it darkened up from the original??
Mine's pretty dark too, and I thought they were the same color, but I think mine's got more purple in it. Wonder if mine will be as dark as yours??
This is mine in very heavy shadow (am doing C first):
This is more lit up:
I don't think there's black in mine... did yours start out with black??
Also, what did you do with the small piece that was more like mine (cut off in the above pix)? Why didn't you make that first?
Well, you would know
. So the CA makes it darker than 'wet wood' color? Just trying to guess because it's fun
.
HEY, Meenie, where the Dibicon level?
Oh man, I've been waiting for quite a while to say that, but forgot.
DIBICON 1 SET - DIBI vape IMMINENT!!!
But . . . I had to run out of the house for a bit. I was thinking I would get back way before the mailman arrives, but noooooooo. He came early today - of all days in the year - and left a notice on the door. Worse yet, you DID pay for no sig. Arrrrrgh!
Ah well, out to the post office tomorrow.
Dibi vape is still imminent. Maintain DIBICON 1!
you are famous in the land of the square coil Dibs http://www.e-cigarette-forum.com/forum/rebuildable-atomizer-systems/540827-square-coil.html sorry I mean sqoil
looks like i'll have to do my homework on the two batterys
looks like i'll have to do my homework on the two batterys
As the title says, I have been Dibized! My OliverR arrived and it is so beautiful it knocks your socks off. In case you forgot from the preview, this is the Ambrosia Maple. The workmanship on this mod is beyond belief.
If you look at the first two posts, you can see the hole left by the Ambrosia Beetle. This is how the wood gets its name. However, in my case, this is the black hole I will enter as I enjoy my vape! PDIB did wonders capturing this as well! The finish feels like satin. So smooth and pleasant hand feel. At the moment that is a Glass drip tip. I was sent extra wood so will be crafting a new drip tip to match.
Beauty!
And I see a virtual dagger between pics 2 & 3.
ETA: And it could use some new scales - maybe in a dyed blue.
Last edited:
you are famous in the land of the square coil Dibs http://www.e-cigarette-forum.com/forum/rebuildable-atomizer-systems/540827-square-coil.html sorry I mean sqoil
looks like i'll have to do my homework on the two batterys
thanks, I added my centavos
Not where I can measure now, but I noticed last night that it was right at the same length as an AW 1600mah sans the button top thingy.
She's here!
Thanks so much mr dibi!
Rm2 doesn't get here till Saturday.. So can't use it "for real" till then.. But the IGO L is working fantastic
Few questions..
My AW IMR 18650
battery "wiggles" around, even with the O ring in place.. Is this normal? Or should I add the thicker of the two ?
It's relatively easy to push the bottom cap out when hitting the fire button.. Should I stop being so manly with it..?? Or?
And last but not least..
Best reccomended microcoil build (with cotton) for the RM2 on this beauty??
Last edited:
Made a special trip inside and downstairs just for you, 65.23mm.
(Wife sent me there for something else, but it sounded good didn't it?)
She's here!
Thanks so much mr dibi!
Rm2 doesn't get here till Saturday.. So can't use it "for real" till then.. But the IGO L is working fantastic
Few questions..
My AW IMR 18650
battery "wiggles" around, even with the O ring in place.. Is this normal? Or should I add the thicker of the two ?
It's relatively easy to push the bottom cap out when hitting the fire button.. Should I stop being so manly with it..?? Or?
And last but not least..
Best reccomended microcoil build (with cotton) for the RM2 on this beauty??
Saweeeet! Maple burl?
Best microcoil? Hmmm. I have a dual micro 0.4Ω and a couple of single micros set up (and waiting, dadgum postman), but now I'm thinking . . . maybe a Dibi Crack? But then, I haven't tried any of the Mundy Magic stuff yet - thinking imma order some ribbon kanthal soon.
As the title says, I have been Dibized! My OliverR arrived and it is so beautiful it knocks your socks off. In case you forgot from the preview, this is the Ambrosia Maple. The workmanship on this mod is beyond belief.
If you look at the first two posts, you can see the hole left by the Ambrosia Beetle. This is how the wood gets its name. However, in my case, this is the black hole I will enter as I enjoy my vape! PDIB did wonders capturing this as well! The finish feels like satin. So smooth and pleasant hand feel. At the moment that is a Glass drip tip. I was sent extra wood so will be crafting a new drip tip to match.
Sam, it's beautiful? Love the Ambrosia. The beetle hole makes it extry' special.
Also just noticed this. Perhaps I didn't thread it correctly? I'm treating this like a newborn baby.. I don't want to hurt it.. Lol...
She's here!
Thanks so much mr dibi!
Rm2 doesn't get here till Saturday.. So can't use it "for real" till then.. But the IGO L is working fantastic
Few questions..
My AW IMR 18650
battery "wiggles" around, even with the O ring in place.. Is this normal? Or should I add the thicker of the two ?
It's relatively easy to push the bottom cap out when hitting the fire button.. Should I stop being so manly with it..?? Or?
And last but not least..
Best reccomended microcoil build (with cotton) for the RM2 on this beauty??
Mighty hansome burl there g!
pretty much everything you asked about is covered in the 1 1/2 pages of "literature" I put in the box. (did I forget?)
They come with literature now do they? Well well.
I use the fattest o-ring on mine and i let the bottom plate set the level of the battery when i install it, i.e. i have the battery hanging out of the bottom and i just push it in with the bottom plate.
I stacked the washers under my firing button to get it to where i like the "throw" of the button, in other words, so you don't have to press the button 1/2 an inch before the mod fires!
Microcoils - you're on your own!
T
I use the fattest o-ring on mine and i let the bottom plate set the level of the battery when i install it, i.e. i have the battery hanging out of the bottom and i just push it in with the bottom plate.
I stacked the washers under my firing button to get it to where i like the "throw" of the button, in other words, so you don't have to press the button 1/2 an inch before the mod fires!
Microcoils - you're on your own!
T
- Status
Similar threads
