PDIB's Making MODs!
- Thread starter pdib
- Start date
- th_trl_thread_readers 0
- Status
wait a minute, let me get this straight.... you are the one who keeps going on and on about how perfect it is the way it is and how there's nothing you can do and it doesn't need any modding, then you go out and mod the ....ing thing???
nooo.... I fixed it, it wasn't working right
.
wait a minute, let me get this straight.... you are the one who keeps going on and on about how perfect it is the way it is and how there's nothing you can do and it doesn't need any modding, then you go out and mod the ....ing thing???
that's the nice thing about having a lot of opinions.
you can swap 'em around depending on your mood.
Yes I did and a new bottle. (Actually Akdare hooked me up
) But it sucks up scent through the bottle though not the tube...A little shellac has fixed all problems though, yummy woodville now! Though I wouldn't mind some Howard's....mmmmmm....I could vape unflavored and let the Howard's scent it!! 
You got you one crazy ayuss nose Megan
Sent from my iPhone using Tapatalk
You have no idea!
I once made my friend dig through her apartment looking for the moldy citrus I could smell before we even went in her front door. Turns out she had bought a bag of lemons in May (this was October) that she had completely forgotten about. I couldn't even go into her apartment for a month...
ETA: And that was when I was smoking a pack a day!
Ew your friend is disgusting and forgetful lol
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
that's the nice thing about having a lot of opinions.
you can swap 'em around depending on your mood.
Wut? I just fixed the problem..
Hmm.. Is she single?
Lol
Sent from my iPhone using Tapatalk
LOLOL!!! You guys crack me up so much sometimes
!!
Hmm.. Is she single?
Lol
Sent from my iPhone using Tapatalk
Last I heard she was engaged to her high school sweetheart. We parted ways under less than happy circumstances...She doesn't smell citrus mold though!
I did a little testing on the pastel birdseed. It's pretty soft. Scares me. It's beautiful tho. It's just in limbo now. If anyone feels super brave and like throwing money at me regardless of the consequences . . . . . . . .
Mama likee. it reminds me of something... one of the best days of my life? or a song, perhaps?
https://www.youtube.com/watch?v=ZqXmBy1_qOQ
if that's still in your pickup trunk bed when my #3 rolls around, i'll give it a shot
I had a problem with the button.... it would fire fine, then it wouldn't fire at all (seconds later), and I'd push so hard the bottom would fall out and it still wouldn't fire. It drove me nuts, so I tried everything in the bag. In the bag was the bee button I had made, and Peter had returned... so I thought I'd try that. It was too tall, but I wanted to see what it would look like anyway. Using it... it turned the button into a toggle! I have no clue why, but NOW, it fires by pushing the button to the side. I worry about the long term effect on the Richlite cap, but I'm not pushing/pulling to the side very hard to fire the mod. I did lose out on the benefits of the new spring, but at least it fires fairly consistently now. I think the problem is that the silver screw isn't flat... it may work better if it were splayed at the ends. So if you are toggling it, it's able to make better contact at the bottom. Anyway, it's working now
This is one beautiful mod
And I want to thank Pdib for signing the bottom
You didn't lose the benefit of the spring. By installing the toggle button you bypassed it and are now making direct contact with the plate.
You didn't lose the benefit of the spring. By installing the toggle button you bypassed it and are now making direct contact with the plate.
I'm not sure that's true (direct contact with the plate)... I screwed the silver contact into the bottom of the old screw without the new spring, and then the brass bolt back on the silver screw. And for no reason I can see, it works by pushing the button to the side and slightly down.
If you push straight down, nothing happens (but that's what was happening before). When I pull the top off, I can't see why it doesn't make contact pushed straight down, since the silver does move down... makes no sense at all, but it's working
. But it's not touching a plate, it's touching the bottom of the battery...
I bet GG could bedazzel a mod like this.
http://www.luxuryseekersonline.com/worlds-most-expensive-electronic-cigarette/
http://www.luxuryseekersonline.com/worlds-most-expensive-electronic-cigarette/
yeah, looks like you've got two sideXside on that run, so you could have a chancy one and still come out with a mod either way. I've made a note.
I'm not sure that's true (direct contact with the plate)... I screwed the silver contact into the bottom of the old screw without the new spring, and then the brass bolt back on the silver screw. And for no reason I can see, it works by pushing the button to the side and slightly down.
If you push straight down, nothing happens (but that's what was happening before). When I pull the top off, I can't see why it doesn't make contact pushed straight down, since the silver does move down... makes no sense at all, but it's working
I think that's because you epoxied your spring "near" the aluminum shaft of the button stem. That's what I was saying about how it may not work so much. So, you're probably circumventing the spring and touching the button stem to the edge of the hole in the plate when you "toggle"
- Status
Similar threads
