I took a 2.25" piece of wick and folded it in half. Wrapped coil around wick along with a paperclip to have something stiff to help wrap it. After wrapping 6 wraps, I installed it diagonally, with each end of coil going into posts in opposite directions, with as little bare wire as possible. I put the loop end of the wick into the well, on other side there is two ends. I put one end in the well and the other end goes up into the cap. Its a 2ohm coil, I got it up to 4v on the provari. It is working pretty good now, I've filled the well 3 times in the past hour or so. I'm just not getting much flavor. I have been playing with loosening and tightening the cap to get more/less air, and am in the process of finding that sweet spot. I wonder if I'm just spoiled by my newly dead HH.357, that it had such good flavor, or if my coil needs to break in a little, or if that is just the best flavor I'm going to get from the silica wick. I'd like to try some SS mesh, I've read that 325 mesh would probably work/wick the best, anyone know a good place to get some? Actually also need some kanthal and wick, I've burned through just about all it came with as well as the extra 6 inches I think that I bought with the phoenix.
