Thanks Spydro. Apart from magnets falling out, 510 centre pin missing, wrong color doors and missing t shirts I'm happy with my new Reos mods but I'm sure their last few weeks were hectic so I'm trying not to judge too harshly. I wish Eric would reply to my emails though!
Found an old picture that I took with old Bullet camera when I was the RMAA at Camp Nimitz for a short time. Short time because my stay on Camp Nimitz island was only 3 weeks.
Sorry for your "issues". His issues is why I didn't support him as the follow up owner of the company that Rob had made famous for his undying honesty, attention to details and customer service. Eric has had to deal with his wife's medical issues for many months and as it should have been has been the main priority. But he has never been reliable about replying back to email or in some cases ever fixing his mistakes. IE I know of one gent who sent him a Woodvil for repair and a year plus later he still had not replied back to that gents inquires about it several times at all. The squeaky wheel is the one that gets greased, so I'd suggest you stay hard on top on him until he does get back to you. Also, he has left the Reo forum on ECF up for the time being, and I heard has been posting on it. So I'd tag him there publicly as often as it takes until he responds back to you there or via email.
If you haven't tossed the packaging out yet... check it closely for the missing 510 adjustment grub screw. If it is not installed tight they have fell out in shipping before. They are reverse threaded... CCW to tighten. If the magnets fell out they were probably not installed right either. Normally they are glued in. Wrong color door... your guess is as good as mine. Missing shirts as well.
Good luck.
Yeah thanks . I'm on it. Appreciate your feedback. I'm tenacious and feel pretty strongly about customer feedback so until these simple little issues are addressed I won't leave it idling.
Tonight's rotation
I put away all but one mod at the end of the day. This is what I’m working with by the time I’ve finished my morning coffee.
Breakfast.
Sent from my iPhone using Tapatalk
Sir Lancelot mech w/ a True @ 1.7 or so ohms.
Resistance is not futile.
Resistance is not futile.
eta: the True RTA is 1.2ish ohms, my Gotank (on another mod) is 1.7ish
Last edited:
Added some character to my Dotsquonk, man that hurt ha ha.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Post script: Eric emailed overnight fixing all problems. I wish him and Cindy all the best
At least it’s a different photo m
Another C2MNT on my Vindicator with some banana frosted flakes.
I'm unapologetically obsessed with my new Reos. Here's my Grand LP Supervein with the hammertone door. Wismec Tobhino on top, vaping my (not very good - early days) DIY version of Killer Kustard.
Reos have that effect on those of us that appreciate them. The five P67's especially simply check all the boxes for me ☑. So did the four 2015 Woodvil's ☑ back when I still used them.
I remember the Custard days when I was lead astray a little from my DIY's a bit in 2014 and bought a few over hyped premade custards to try them out. Grant's, Bryce's, Costar, 24/7, SDV's, NT's, AV's, Money, etc. Almost none of them won me over. In part because at that time I had to buy them with 6mg/ml nic in them when I had not used nic at all in any of my DIY from the very start of my vaping... and in part because the flavor profile of custards was just not my thing. Worst of the worst to me was those from NikoTicket
Anyway, as luck would have it (or maybe because the stars were all aligned with Jupiter in the wee hours here) I just happened to take a very old 60ml bottle of Daft Spunk (from Sleeping Dragon Vapor, Flower Mound TX) I stumbled across in my deep cold storage a little while ago tonight that I haven't touched since to do a test try with to see if it was still viable.
So after it warmed up some I dripped some in a Profile Mesh RDA on a mech DT-DS dual batt squonk mod that reveled that it is still viable, tastes like I remember it is suppose to taste. But it was still a fail to my tastes with this 0.12Ω mesh. Back when I bought it I was using VapourArt GP PAPS Mech tube mods with their SNP Tanks driven with By Leo Sophia flow control RTA's with builds more in the .5Ω to .7Ω range, and with only the very restricted DL hits the Sophia's in carto tanks could deliver (they were for MTL normally).
Regardless the joose has held up just fine, would probably be doable if I dug out one of my GP PAPS Mods or Provari Mods to run either a VapourArt SNP/Sophia or one of their Heron tanks I have on (would have to be a 1.1/1.2Ω build for the Provari though). But that's more than I'm willing to do for a joose that was borderline even way back then (and still would be for my uses).
I have pictures of most of the bottles I tried in that era, but could only find the logo of SDV and not any of the bottles I had taken (besides Daft Spunk I had tried 6 or 7 of their other liquids too that included SpunkBerry, Alboraya, ButterBob, Obscene Jester, Skeleton Key, S.W.G., etc). Alboraya and S.K. came the closest to being doable for me.
Lots of memories... but rattled log enough.
Nah keep rattling - it's interesting!Reos have that effect on those of us that appreciate them. The five P67's especially simply check all the boxes for me ☑. So did the four 2015 Woodvil's ☑ back when I still used them.
I remember the Custard days when I was lead astray a little from my DIY's a bit in 2014 and bought a few over hyped premade custards to try them out. Grant's, Bryce's, Costar, 24/7, SDV's, NT's, AV's, Money, etc. Almost none of them won me over. In part because at that time I had to buy them with 6mg/ml nic in them when I had not used nic at all in any of my DIY from the very start of my vaping... and in part because the flavor profile of custards was just not my thing. Worst of the worst to me was those from NikoTicket
Anyway, as luck would have it (or maybe because the stars were all aligned with Jupiter in the wee hours here) I just happened to take a very old 60ml bottle of Daft Spunk (from Sleeping Dragon Vapor, Flower Mound TX) I stumbled across in my deep cold storage a little while ago tonight that I haven't touched since to do a test try with to see if it was still viable.
So after it warmed up some I dripped some in a Profile Mesh RDA on a mech DT-DS dual batt squonk mod that reveled that it is still viable, tastes like I remember it is suppose to taste. But it was still a fail to my tastes with this 0.12Ω mesh. Back when I bought it I was using VapourArt GP PAPS Mech tube mods with their SNP Tanks driven with By Leo Sophia flow control RTA's with builds more in the .5Ω to .7Ω range, and with only the very restricted DL hits the Sophia's in carto tanks could deliver (they were for MTL normally).
Regardless the joose has held up just fine, would probably be doable if I dug out one of my GP PAPS Mods or Provari Mods to run either a VapourArt SNP/Sophia or one of their Heron tanks I have on (would have to be a 1.1/1.2Ω build for the Provari though). But that's more than I'm willing to do for a joose that was borderline even way back then (and still would be for my uses).
I have pictures of most of the bottles I tried in that era, but could only find the logo of SDV and not any of the bottles I had taken (besides Daft Spunk I had tried 6 or 7 of their other liquids too that included SpunkBerry, Alboraya, ButterBob, Obscene Jester, Skeleton Key, S.W.G., etc). Alboraya and S.K. came the closest to being doable for me.View attachment 845843
Lots of memories... but rattled log enough.
Similar threads
- Locked
