from what i have read, you have to PM him here (ECF) forum, here is his profile
http://www.e-cigarette-forum.com/forum/members/133825/darkzero.html
Precise ELA Telescoping Mod by Super-T!
- Thread starter forcedfuel50
- Start date
- th_trl_thread_readers 0
- Status
from what i have read, you have to PM him here (ECF) forum, here is his profile
http://www.e-cigarette-forum.com/forum/members/133825/darkzero.html
Thanks! I found a video:
For now, I'm good with my screwdriver and mini bobby pin. But, she sure is pretty.
Thanks! I found a video:
For now, I'm good with my screwdriver and mini bobby pin. But, she sure is pretty.
Me posted the vid for you a couple days ago
. I am still loving your innovation!
Very smart.Usually, those not comfortable with building are skeptical. But, once comfortable, the flavor, vapor and ease of just replacing the wick in lieu of the entire set up is well worth it.
Note:This does have a flush set screw on the end to change coil pins.
Me posted the vid for you a couple days ago
I am still loving your innovation!
Usually, those not comfortable with building are skeptical. But, once comfortable, the flavor, vapor and ease of just replacing the wick in lieu of the entire set up is well worth it.
Note:This does have a flush set screw on the end to change coil pins.
Oh. I must have missed that post. Or forgot. Stroke brain.
I love micro coils. I hesitated at first. But............................
Me posted the vid for you a couple days ago
I am still loving your innovation!
Usually, those not comfortable with building are skeptical. But, once comfortable, the flavor, vapor and ease of just replacing the wick in lieu of the entire set up is well worth it.
Note:This does have a flush set screw on the end to change coil pins.
its probably what it was, only tried once, wasn't impressed with it so went back to my old style coil.
edit: i haven't had to remake my coils in a while now, i just cut out the ekowool mesh out and slide the new one in (doubled 2mm ekowool) re-touch the coil as i see fit and off i go.
Last edited:
Beautimous!
500 stance
ST Flat Bottom
Topped w/ Taifun GT
Filled w/ Five Pawns Gambit
She's a looker!
I like that tip in the Darkzero vid of using needle nose pliars to compress the coil, I'll be doin' that!
Just make sure not to fire it who'll squeezing the coil.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
I just snagged one, couldn't resist and went with the limited edition brass lol.
anavidfan and Cucco - you guys need to jump on this with your lame pinkies. I did and my pinkies are just fine Get the brass before they sell out! http://congrevape.com/projects/qvapes-coiler/
(I bet you will always be able to get your $$ back on the brass if you so choose)
Get the brass before they sell out! http://congrevape.com/projects/qvapes-coiler/(I bet you will always be able to get your $$ back on the brass if you so choose)
anavidfan and Cucco - you guys need to jump on this with your lame pinkies. I did and my pinkies are just fine
(I bet you will always be able to get your $$ back on the brass if you so choose)
My Mini Bobby Pin, on my screwdriver, is working great for me. The Mini holds real tight. But, both jigs are real pretty.....
I spin/turn to wrap. I use 24 gauge. Not torched. I think spinning/turning, would be easier than wrapping. If that makes sense. Or, it's just me........
Last edited:
My Mini Bobby Pin, on my screwdriver, is working great for me. The Mini holds real tight. But, both jigs are real pretty.....
View attachment 299051 View attachment 299054
I spin to wrap. I use 24 gauge. Not torched. I think spinning, would be easier than wrapping. Or, it's just me........
You have a great solution so stick with it. I know I will want to play around with different dia coils so what the heck.
What one did you buy? I bought one from DantesInferno. Actually, I really like the way it works. Inexpensive. But, it wraps a small coil. I like a little larger coil.
I wander if its possible to replace the pin/ bar with a wider diameter?
- Status
Similar threads
