I'm on the Senisis list as well, #173. Standard SS though, I prefer it that way. Though a brass vela with the brass Senisis looks really amazing.
Precise ELA Telescoping Mod by Super-T!
- Thread starter forcedfuel50
- Start date
- th_trl_thread_readers 0
- Status
That is sweet... Senisis. So is the Poldiac... I mean Caravela
421... wow. Makes you think.... that's just one specialty (custom) Genesis atomizer... and the way anything quality in a Gen (high end) is going like they just can not make them fast enough... how many vapers are using Genesis mods, and how many have yet to get into it.
and then there's those of us who just can't get enough of a good thing. Like the ELA, and of course David's rba (Gen)
421... wow. Makes you think.... that's just one specialty (custom) Genesis atomizer... and the way anything quality in a Gen (high end) is going like they just can not make them fast enough... how many vapers are using Genesis mods, and how many have yet to get into it.
and then there's those of us who just can't get enough of a good thing. Like the ELA, and of course David's rba (Gen)
I will be placing my Odysseus atomizer on top of the amazing ELA. I like silica atomizer systems. Unfortunately there are not too many Modders that make high quality silica tank atomizers, only other one is the Kayfun by Svoemestro, but its also hard to get. I dont know of any others other than GG and Svoemestro that offer such well made slica tank atomizers.
If anyone can share other high end silica atomizers to crown the ELA with, please do.
If anyone can share other high end silica atomizers to crown the ELA with, please do.
On another note, I just watched Scott's video on the Spheroid, and I totally get how people are modding the A7's to make a "poor man's" version. All that's missing is the metal tube part that connects to the spheroid top cap. You can take some ss mesh rolled into a wide straw and wrap your filler around that. The A7 even has the second top section of the tank to make it a very close copy (with a little creativity). I see a couple of those in my near future. If nothing else, I can always use them in a bottom feeder mod if I ever get a Reo (only other mod I think I'd need after this one). Don't get me wrong, The extra ELA goodies take top priority, but I need something to take my mind off them waiting for their development.
My only "mech" mod (Smok Telescope) broke tonight and I hate not being able to use my low resistance gennies, so I desperately searched the web for anything usable, and no surprise, all nice mech mods are sold out pretty much everywhere, really frustrating!
But thanks to a gent over at a UK forum that told me C9V had a few P+'s in, I now have a nice P+18500 coming my way!
Ideally I'd want an 18350, but Im sure the 18500 will serve me fine.
But thanks to a gent over at a UK forum that told me C9V had a few P+'s in, I now have a nice P+18500 coming my way!
Ideally I'd want an 18350, but Im sure the 18500 will serve me fine.
I can vouch for spheroid and killer. I have two gg pennys and gg ody.
For you gg ody owner this may be of interest and will make it look even sweeter on the ELA. There a mod vendor on UKvapers called Sotong (he's been MIA from the forum for a couple of weeks though). He does loads of upgrade stuff for the ody and his work is exceptional. He making shields for the gg ody. This slide over a clear tank (see pic below). Currently makes them in stainless steel but he's going to offer them in Brass
. Only the shield is brass so this will contrast with the ss of the ody (and the ELA 
). His prices are in USDollars and he ships world wide. From what I make out you order the shield and this comes with a screw top to hold the shield in place (50 dollars). You would also need to order also a clear tank and mid size mouthpiece (45 dollars). I had a clear tanks and mid mouthpiece to go with my stormy term before I got my gg ody and they very well machined and IMO much better than the rampage one's. His clear tanks sit flush with bottom and top cap on the ody.
I'm not associated with him lol just thought gg ody, with brass shield and ELA ... fookin sweet!!! Below his forum link and below that a pic of the ody shield in ss.
UKVapers - Sotong
Last edited:
My only "mech" mod (Smok Telescope) broke tonight and I hate not being able to use my low resistance gennies, so I desperately searched the web for anything usable, and no surprise, all nice mech mods are sold out pretty much everywhere, really frustrating!
But thanks to a gent over at a UK forum that told me C9V had a few P+'s in, I now have a nice P+18500 coming my way!
Ideally I'd want an 18350, but Im sure the 18500 will serve me fine.
Welcome to my world... I only have a the smok tele too. Been looking for some instant gratification (until the ELA is at my door) somewhere on the classies and mod trader. But I have been striking out everywhere.
Yeah it sucks! Really happy C9V had a 18500 for me though, quite better than nothing.
Hi all, i'm new to the thread. I'm going to get a Kayfun (as soon as I can...) for sure, I'm just not sure about the mod yet though. How would the ela fit on the new kayfun with regards to width and steel finnish?
I agree, Ana. I actually wrote about 3 paragraphs related to your post, but I timed out on my freaking Ipad before pressing "post quick reply". I screamed
The worst part, my wife heard me 
(it's 3:30am here, lol)Nic
Dark, if I'm not mistaken, the ELA width is about 25mm (correct me if I'm wrong). In terms of finish, I can tell you that a kayfun of either satin or polished finish should match the ELA's...well, satin or polished finish
. Dave has said that the satin ELA should match the finish of the current satin P+s, and the polished one should default to what you have seen on the first page of this thread. Take care,
Nic
The Kayfun would look great in any finish, but I think I posted a question to David regarding which finish the ELA matched the closest to the 3 different Kayfun ES 3.1 and he said the "y" finish was really close to the polished ELA.
I do have the Killer and I had the Steam Machine for a little while. The steam machine was amazing, but the shape and length was way too long and thin for my PV. Plus though I think the Steam Machine is supposed to hold 2- 2.5 ml of juice it ran out on me so much faster. I hated to sell it, but I did because I dont have the money to keep things just because they are gorgeous. I used the money towards the Odysseus.
I do like the Killer, easy to build and easy to use. Its not completely "perfect" it has its little set up curve, not bad. Its taste is amazing , very close to Odysseus, a bit warmer due to the narrow shape.
I wish I could afford the Kayfun ES 3.1, its beautiful. The Ithaka is also going to looks as beautiful. Kinda cool, The Ithaka parts will be compatible with Odysseus. Im sure it will be cool to mix and match to get some unique looks.
Nicks statement about the diameter of the ELA is correct. I just cant wait. I want the ELA in my hands right now. I dont think anything could not look good on the ELA.
Ive been a bit bored so the other day I played around with photoshop and did a quick mock up of how my Odysseus would look on the ELA. So here it is. Forgive my sloppy work.
PS the Odysseus is an idea I have for having it modified to match the ELA
PS. I also like the "dark side" of things.
I do have the Killer and I had the Steam Machine for a little while. The steam machine was amazing, but the shape and length was way too long and thin for my PV. Plus though I think the Steam Machine is supposed to hold 2- 2.5 ml of juice it ran out on me so much faster. I hated to sell it, but I did because I dont have the money to keep things just because they are gorgeous. I used the money towards the Odysseus.
I do like the Killer, easy to build and easy to use. Its not completely "perfect" it has its little set up curve, not bad. Its taste is amazing , very close to Odysseus, a bit warmer due to the narrow shape.
I wish I could afford the Kayfun ES 3.1, its beautiful. The Ithaka is also going to looks as beautiful. Kinda cool, The Ithaka parts will be compatible with Odysseus. Im sure it will be cool to mix and match to get some unique looks.
Nicks statement about the diameter of the ELA is correct. I just cant wait. I want the ELA in my hands right now. I dont think anything could not look good on the ELA.
Ive been a bit bored so the other day I played around with photoshop and did a quick mock up of how my Odysseus would look on the ELA. So here it is. Forgive my sloppy work.
PS the Odysseus is an idea I have for having it modified to match the ELA
PS. I also like the "dark side" of things.
Last Estimate of completion time made was 2-3 weeks out from Feb.25th....We should be getting close to the home stretch!
- Status
Similar threads
