- Status
thank you
No problem, thanks to alerting me to the issue...
How's your day so far?
Mines lazy,I got up way to early and think I need a nap lol:sleepy:Sent from my Galaxy Nexus, where the mountains meet the desert in Northern Cali
Hey guys, just a little reminder here
Keep forgetting to add that when posting from the phone.
No problem, thanks to alerting me to the issue...
How's your day so far?
Sent from my Galaxy Nexus, where the mountains meet the desert in Northern Cali
running on 4 hours sleep here
definately nap time for me 
I love the feel of the tank. I have said this before it feels great in my hand. I find one finger holding the bottom of the tank. The leakage is minimal but it does leak. I have it sitting on my desk with a few drops of liquid left in it and there is alway a circle of juice on the desk when I lift the tank. Right at the perimiter of the base. Now I do vape VG only. I have a feeling the leakage would be worse with PG but I have none left to try it with. I don't have the gurguling issue as I leave it upright at all times. It is connected to a spinner and sits in the gotvapes lucite stand. I agree with making the base and stem 1 piece to avoid leakage. It does produce a heavy amount of vapor, possibly even more than the splitfire.
Off topic here but I thought this was worth posting:
One of a kind Zenesis is going to be raffled away at the Houston Vapers Club VapeMeet this weekend. Raffle tickets for this one item only are available on line to out of town/out of state participants. To enter follow this link: Raise Money for Houston vapers helping the wounded warrior project | YouCaring
One of a kind Zenesis is going to be raffled away at the Houston Vapers Club VapeMeet this weekend. Raffle tickets for this one item only are available on line to out of town/out of state participants. To enter follow this link: Raise Money for Houston vapers helping the wounded warrior project | YouCaring
The wounded warriors project is an awesome charity.. One of the two i give money to every year..
APOLLO E2 6ml TANK - Leaking/Gurgling follow up
So last night I took it apart for the forth time, after the third time I was doing really well with no leaking or gurgling almost completely. It would clear up almost as fast as it happened, but it started to get worse slowly. I sucked out all the juice and found the center post was starting to come loose. So I torqued it all down with some needle nose pliers this time. I used it all morning while relaxing in bed watching TV, turning it, flipping it, laying it on it's side, trying to make it leak or gurgle. I just checked it again to make sure and not a single leak or gurgle still, even though I tried my best to get it to do so. My leaking on the first post must have been a defect in the seal rubber and not the source of my previous leak, I have not experienced that at all with the last two heads. Niether of these heads have had that issue at all. I think the issue is with the threading of the base, most likely why some of us have had issues with bent posts. Seems like the threading may be to loose, if someone else would like to look into that with more detail. I will try to do so later tonight as well.
So last night I took it apart for the forth time, after the third time I was doing really well with no leaking or gurgling almost completely. It would clear up almost as fast as it happened, but it started to get worse slowly. I sucked out all the juice and found the center post was starting to come loose. So I torqued it all down with some needle nose pliers this time. I used it all morning while relaxing in bed watching TV, turning it, flipping it, laying it on it's side, trying to make it leak or gurgle. I just checked it again to make sure and not a single leak or gurgle still, even though I tried my best to get it to do so. My leaking on the first post must have been a defect in the seal rubber and not the source of my previous leak, I have not experienced that at all with the last two heads. Niether of these heads have had that issue at all. I think the issue is with the threading of the base, most likely why some of us have had issues with bent posts. Seems like the threading may be to loose, if someone else would like to look into that with more detail. I will try to do so later tonight as well.
It is a great charity. I think it's great that Bria got Zen to do this for us. The way the raffle is going to work is Bria will do the raffle like normal with all the locals in the pot until she gets to the grand prize (this Zenesis) at which point she'll add to the pot all the names of those that donated on-line. One entry per $5 of donation.
Here's a better picture she took of it:
For more information or to see who one after saturday check out Houston Vapers Club on FaceBook
Here's a better picture she took of it:
For more information or to see who one after saturday check out Houston Vapers Club on FaceBook
Yup on the T3s. (They aren't likely to carry the T0. The T3 is way superior.)
Apollo 6ml tank
Its been sitting in my tinker box 4 quite some time I've tried a few things but not tightened the bJesus outta center post sounds worth a shot. I also dig the look and feel of this tank. I'm still using the 650mah battery no problems it.
I also feel like I've been locked away in a box somewheres, I haven't been on the forum in sonetime now. Nice 2 b back
Its been sitting in my tinker box 4 quite some time I've tried a few things but not tightened the bJesus outta center post sounds worth a shot. I also dig the look and feel of this tank. I'm still using the 650mah battery no problems it.
I also feel like I've been locked away in a box somewheres, I haven't been on the forum in sonetime now. Nice 2 b back
Thanks for the raffle link SolemnPenguin (and kudo's on your contributions on the ZMax).
Glad to see the contributions climbing (over 400 added since yesterday)!
Glad to see the contributions climbing (over 400 added since yesterday)!
Yeah, it's pretty cool. I wish I could think of more places to put think...
Apollo 6ml tank
Everything is still working perfectly for me after torquing the center post down. Getting ready to fill the tank for the third time since doing so. I am very happy with the performance of the unit now. Flavors are only slightly muted, using Butterfly Bait at the moment.
Everything is still working perfectly for me after torquing the center post down. Getting ready to fill the tank for the third time since doing so. I am very happy with the performance of the unit now. Flavors are only slightly muted, using Butterfly Bait at the moment.
Me too. I sent out an email just a minute ago to a few local vaping buddies anyway.
Dying to know what the next alpha products will be
Sent from my iPad using Tapatalk HD
Sent from my iPad using Tapatalk HD
Me too!
Sent from my Galaxy Nexus, where the mountains meet the desert in Northern Cali
- Status
Similar threads
- Locked
- Locked
- Locked
