Qualifications For the ALPHA™ Program & ALL ALPHA Product Discussion HERE- Check Here For New Alpha Products

Status
Not open for further replies.

nathkiira

Ultra Member
ECF Veteran
Dec 27, 2012
1,180
2,801
TN, USA
ok we will only carry the 3.5 tank they sell, plus a new 3.5 tank they are making and a new larger tank they are making, so no more of the old ones in big or small. now that we know the ravens are good and people are liking them i will have a few different tanks just for the ravens that work well with them. a tank with screw is best, it can un screwed to releave pressure and makes filling easier and avoides filling issues.

its more of the syphoning we are trying to prevent. but overall once the fill is proper it should tick along until they are empty

the fill hole with a screw would be perfect!
 

kwalka

Unregistered Supplier
ECF Veteran
Jan 23, 2012
3,581
4,536
Clearwater, Florida
walkers-finest.com
Whats left to be said on these bad boys? I use genesis attys exclusively. Except when Alpha comes calling. I am always on the hunt for something great for noobs or smokers. Well I think the Vivi Nova may of finally been toppled. I am on my second tank and it is rocking.

So just a thought, why are we calling these filler less cartos? Aren't they bottomish fed attys?
 

badkolo

ECF Guru
ECF Veteran
Oct 17, 2009
11,274
21,917
Whitestone , New York USA
ok this is my new method for properly resetting it, i caused the issue on purpose a few time and blowing through the battery end should alleviate it but if not then it is the pressure, so if you blow through it and it only solves it a little, then push then carto through as if you would refill it, this will let the air inside escape, then push it back, do a quick blow out form battery end then vape, each time it solved the issue.

as you vape and vape and vape, on some depending on god knows what, juice, moisture, condensation, whatever it is, pressure is building, to much pressure and it will push the juice through just a little more then you might want, not leaking but a little tiny gurgle on the start then it goes away, that means to much pressure, so push the cart down to alleviate pressure and blow out and your good to go, this is why a top screw tank should be helpful
 
Last edited:

nathkiira

Ultra Member
ECF Veteran
Dec 27, 2012
1,180
2,801
TN, USA
ok this is my new method for properly resetting it, i caused the issue on purpose a few time and blowing through the battery end should alleviate it but if not then it is the pressure, so if you blow through it and it only solves it a little, then push then carto through as if you would refill it, this will let the air inside escape, then push it back, do a quick blow out form battery end then vape, each time it solved the issue.

as you vape and vape and vape, on some depending on god knows what, juice, moisture, condensation, whatever it is, pressure is building, to much pressure and it will push the juice through just a little more then you might want, not leaking but a little tiny gurgle on the start then it goes away, that means to much pressure, so push the cart down to alleviate pressure and blow out and your good to go, this is why a top screw tank should be helpful

ah that explains exactly what was going on my glass tank thats 4x the size of the raven .. way way too much pressure ..you sir are a genius =)
 

magentaman

Unregistered Supplier
ECF Veteran
May 14, 2012
437
437
Puyallup,Wa
www.bfbvapor.com
This thing rocks in my 7ml pyrex tank with a side fill. Still on my first Raven "BFATS" (Bottom Feeder Atomizer Tank System LOL). I have run no less then 30 ml through this things if not more, and its still rocking my world. Yes I have to give it a reset blow from time to time, but hell its well worth it!
 

zipflint

Ultra Member
ECF Veteran
Verified Member
May 26, 2012
2,570
2,954
Spartanburg, SC
Hey badkolo and everyone else, thanks for the continued assistance! When I get myself in gear I will give these methods a try! Woke up with a wicked pissah of a cold! Might have to resort to an old carto and some menthol-something for a while. (that's my go-to when I want to vape but can't taste anything)
 

magentaman

Unregistered Supplier
ECF Veteran
May 14, 2012
437
437
Puyallup,Wa
www.bfbvapor.com
Hey badkolo and everyone else, thanks for the continued assistance! When I get myself in gear I will give these methods a try! Woke up with a wicked pissah of a cold! Might have to resort to an old carto and some menthol-something for a while. (that's my go-to when I want to vape but can't taste anything)


I can relate! I am just getting over a nasty head cold. Until yesterday I couldn't taste much of anything. Get well soon!
 

CountSmackula

Genisis Junkie
ECF Veteran
Verified Member
Jan 16, 2012
8,946
23,516
BFE, KY
I can relate! I am just getting over a nasty head cold. Until yesterday I couldn't taste much of anything. Get well soon!

I was lovingly given the sickness by a kindergartener this week. :( The only thing that tastes 'right' right now is mint flavors. Even the Pluid tastes "muted". :shock:
 

Debadoo

ECF Guru
ECF Veteran
Verified Member
May 18, 2012
18,052
133,969
Texas, near Fort Hood
I was lovingly given the sickness by a kindergartener this week. :( The only thing that tastes 'right' right now is mint flavors. Even the Pluid tastes "muted". :shock:

yuck sorry hun. that and being in a hospital are the two best ways in the world to get sick. Hope you're better soon.

Mag, glad you're feeling a bit better. Neat video too, was great to see you and your family.

My ravens are due here today. Gotta go back and pick out the posts with all the tips in them and save them before I lose them.
 

Disconnect

Ultra Member
ECF Veteran
Verified Member
Jan 25, 2013
1,932
2,737
Washington DC
Got my other 3 today. I haven't tried it in a pyrex tank yet, but its super tempting. I think other people have already beaten me to thick juice testing, but I'll probably do that anyway. (Not sure if I should mention the vendor, but all their juices are insanely thick. I can't get them to work properly in any tanks, but I really really want to..)
 

matcas

Super Member
ECF Veteran
Verified Member
Mar 26, 2012
659
786
Los Angeles Calif.
Got my other 3 today. I haven't tried it in a pyrex tank yet, but its super tempting. I think other people have already beaten me to thick juice testing, but I'll probably do that anyway. (Not sure if I should mention the vendor, but all their juices are insanely thick. I can't get them to work properly in any tanks, but I really really want to..)

Let me know how it goes because with 100 vg not so great so far.
 

Psyche

Vaping Master
ECF Veteran
Nov 9, 2011
6,230
30,104
Left of Center
Raven

I don't have anything new to add really. Been using it @ 18 hours, 4v on my Provari with a 50/50 juice. Stellar flavor, excellent vapor! I use one of those juices that has subtleties that don't come through on most cartos, but the Raven delivers them beautifully. Filled by pulling out the carto part way and dripping down the side and let it set about a minute and it worked great from the first. I haven't had any gurgles or dry hits at all. Being that they're slimmer, they'll look a lot better on a Robust than the larger diameter tanks do.

These are a winner so far. So much so, I just ordered a couple more and some replacement cartos. :)
And I always considered myself a top coil person *shrug*
 
Status
Not open for further replies.

Users who are viewing this thread