Qualifications For the ALPHA™ Program & ALL ALPHA Product Discussion HERE- Check Here For New Alpha Products

[badkolo]

i hope they work for you guys, i didnt say they are miracle workers so 100%vg that is super thick might be a issue but i know bobas works through it and so do some others.. but they are not designed for really super thick vg or else everyone else would have a issue

 

[zipflint]

Yeah I ran a whole tank of Boba's through mine. That was the one fill I did (apparently) totally correct, because I didn't get any of the scratchy dry hits.

Still all clogged up from this cold. Actually now that I think about it, it's probably my spring allergies kicking in. Great.

 

[nathkiira]

i ordered some 50/50 , 70 vg / 30 distilled water.. and some 100% vg to test out in the ravens

can say i've had no issues with 80pg/20vg .. or 70/30 either in the raven tank

 

[Disconnect]

I threw some of the thick stuff in and so far its going ok. Had to turn it down a bit but it still gives good flavor. I'll see if I can find out what the mix is, but this is the first tank that has used it even remotely successfully

 

[Hokus]

Been using gorilla juice all night and the raven still vapes like a champ!

 

[Adrena]

Raven

I don't have anything new to add really. Been using it @ 18 hours, 4v on my Provari with a 50/50 juice. Stellar flavor, excellent vapor! I use one of those juices that has subtleties that don't come through on most cartos, but the Raven delivers them beautifully. Filled by pulling out the carto part way and dripping down the side and let it set about a minute and it worked great from the first. I haven't had any gurgles or dry hits at all. Being that they're slimmer, they'll look a lot better on a Robust than the larger diameter tanks do.

These are a winner so far. So much so, I just ordered a couple more and some replacement cartos.
And I always considered myself a top coil person *shrug*

I;m right there with you. Just floored by a carto WTH

 

[nathkiira]

I;m right there with you. Just flooded by a carto WTH

flooded or floored .. =P

 

[Adrena]

flooded or floored .. =P

I admit nothing....

 

[nathkiira]

I admit nothing....

touche =P .....

 

[Psyche]

flooded or floored .. =P

I understood her

I think I've learned to correct for Autocorrect

 

[VapingTurtle]

I understood her

I think I've learned to correct for Autocorrect

I've learned to speak Adrenaese... a foreign language fer sure.

 

[nathkiira]

I understood her

I think I've learned to correct for Autocorrect

i did too, was just poking fun =)

 

[Adrena]

I've learned to speak Adrenaese... a foreign language fer sure.

You know they are not privy to that mess you call Adrenaese?

 

[VapingTurtle]

You know they are not privy to that mess you call Adrenaese?

They are now...


(But only in Alpha)

 

[KrasH]

The Raven on the ChiGG, works really freaking well on this mod with an 18500. Running 20/80 Strawberry/Banana Milkshake in the tank. Flavor continues to be very good! I have started recommending them to people that like carto tanks but hate carto fill taste. No brainer as far as I am concerned. Great job guys!

 

[strifeimmaculate]

I wanna be in ALPHA so bad so I can try out some of the awesome things that only ALPHA users get to use and I don't buy from anyone other than GotVapes and my local vape shop! I don't know how long it will take to make that many posts though! UGH! HELP!

 

[nathkiira]

I wanna be in ALPHA so bad so I can try out some of the awesome things that only ALPHA users get to use and I don't buy from anyone other than GotVapes and my local vape shop! I don't know how long it will take to make that many posts though! UGH! HELP!

the post count is flexible

 

[kwalka]

So I tossed 1 of the extra "attys" into a 22mm carto tank and it is only performing about 50%. I am getting dry hits every now and again. I am needing to give her a couple primer pulls every 5ish drags.

I did not check the res of the atty b4 I installed it. I may do that. As I type this it's dawning on marblehead that maybe 4.2 v is too much if this happens to be a low res atty, carto, thinga-ma-bob.

 

[nathkiira]

So I tossed 1 of the extra "attys" into a 22mm carto tank and it is only performing about 50%. I am getting dry hits every now and again. I am needing to give her a couple primer pulls every 5ish drags.

I did not check the res of the atty b4 I installed it. I may do that. As I type this it's dawning on marblehead that maybe 4.2 v is too much if this happens to be a low res atty, carto, thinga-ma-bob.

did you prime it with a few drops down the center first?

 

[kwalka]

did you prime it with a few drops down the center first?

Yes. It vaped great for the first 3rd of a tank. now it's happening intermittently.