Random DIY mixing and More

[FranC]

Fuji Apple by FA?

With all probability . I tried every apple flavor out there. I’ve lost interest now. Not wasting any more money.

 

[dennism]

Any interest in posting your recipes for Zazie’s blog?

These are recipes I found on the internet, they aren't mine.
Except for the blueberry dream and the rusty pelican, I haven't tried the others. Letting them steep!

 

[FranC]

These are recipes I found on the internet, they aren't mine.

Doesn’t really matter. Other folks might like them. I believe @hittman posts recipes he finds online.

 

[Redbird11]

Let them soak in a container of soapy water.

I'm OK with the residual smell of most eliquids in a reused plastic eliquid bottle...as long as there's no taste, too. Stronger eliquids though (like my Mint Chocolate Chip) and a few others...get their own bottle that's reused just for more of them. But, if the smell bothers you...you might want to try rinsing the bottles out, or filling them and letting them sit for awhile, using a solution of water & baking soda, to see if that helps. Baking soda will remove/absorb smells in a fridge, so it might work for plastic bottles, too.

Both were good ideas. I think I will try soaking them overnight in the soapy water. Then if that doesn't do the trick, I'll go with the baking soda option.

 

[FranC]

It took me a few years to go all glass. The smell of the plastic bottles was one reason.

 

[FranC]

Both were good ideas. I think I will try soaking them overnight in the soapy water. Then if that doesn't do the trick, I'll go with the baking soda option.

When I was still using a lot of plastic that worked the best for me.

 

[DavidOck]

Does anyone have any good suggestions on cleaning out plastic ejuice bottles? I have some 10ml bottles that I have rinsed out several times with hot water, yet I can still smell the old flavorings.

Both were good ideas. I think I will try soaking them overnight in the soapy water. Then if that doesn't do the trick, I'll go with the baking soda option.

And, if neither of those works for you, maybe try filling with a dilute bleach/water mix for a few hours. Rinse well, of course!

 

[FranC]

When I started vaping it was vendor juice in glass bottles. I saved all the bottles because I was aware of DIY.

 

[hittman]

Do you vape low watts? Tootle puff?
I vape high watts 40-60 depending on the device, coil, juice etc

I jump around a lot. I'll do 10-15 watts in a zlide or zenith or I like to run 25-30 watts in my zeus tanks. Some others can go higher but I rarely go over 50 watts. I have the gingerbread in an nrg tank that I was running around 27 watts.

Doesn’t really matter. Other folks might like them. I believe @hittman posts recipes he finds online.

I do sometimes share ones I find online. I just make sure to give the original mixer credit that came up with it.

 

[dennism]

I jump around a lot. I'll do 10-15 watts in a zlide or zenith or I like to run 25-30 watts in my zeus tanks. Some others can go higher but I rarely go over 50 watts. I have the gingerbread in an nrg tank that I was running around 27 watts.



I do sometimes share ones I find online. I just make sure to give the original mixer credit that came up with it.

Therein lies the problem, i have no idea where I found them or who the original mixers were.

 

[hittman]

Therein lies the problem, i have no idea where I found them or who the original mixers were.

I run into that once in a while. I just state in my post that it isn't my recipe.

 

[FranC]

I’ve been vaping a NET recipe in my GTX tank with mesh coil. The mesh really brings the fruit in the recipe forward. I think I found the perfect tank/coils for my NETs.

 

[ShowMeTwice]

Good morning random folks Have you any plans today?

Hi. Good afternoon and all that jazz!

So far today, I've fixed a kitchen plumbing problem and replaced a kitchen light fixture. Have a few loads of laundry going currently.

Also tried out a few different airflow inserts in one of my Dvarw RTA's. For now I'm settling on the 2.5mm AF so I can easily MTL and do a fairly restricted DL with it. Options, gotta love 'em.

My MF Peach recipe is pretty nice and smooth. I skipped doing a SFT with that one and just went for something I knew would work well for testing.

MF Peach 0.8%
FLV Vanilla Pudding 1%
FLV Cream 0.5%

I will add a cake, pie crust or cookie to it for some kind of foundation. Not sure which one yet. Any thoughts or ideas???

 

[Shadav]

Does anyone have any good suggestions on cleaning out plastic ejuice bottles? I have some 10ml bottles that I have rinsed out several times with hot water, yet I can still smell the old flavorings.

I either reuse them for similar flavors
or let them soak in vodka overnight
I'm iffy with using soap as it can leave a residue
plus the alcohol disinfects not a big issue with bottles but still, I do the same with drip tips, rdas, wicks/coils (tanks and carts when I used them)

 

[FranC]

Hi. Good afternoon and all that jazz!

So far today, I've fixed a kitchen plumbing problem and replaced a kitchen light fixture. Have a few loads of laundry going currently.

Also tried out a few different airflow inserts in one of my Dvarw RTA's. For now I'm settling on the 2.5mm AF so I can easily MTL and do a fairly restricted DL with it. Options, gotta love 'em.

My MF Peach recipe is pretty nice and smooth. I skipped doing a SFT with that one and just went for something I knew would work well for testing.

MF Peach 0.8%
FLV Vanilla Pudding 1%
FLV Cream 0.5%

I will add a cake, pie crust or cookie to it for some kind of foundation. Not sure which one yet. Any thoughts or ideas???

For my tastes I’d go with biscuit. Just me, lol.

 

[Shadav]

Hi. Good afternoon and all that jazz!

So far today, I've fixed a kitchen plumbing problem and replaced a kitchen light fixture. Have a few loads of laundry going currently.

Also tried out a few different airflow inserts in one of my Dvarw RTA's. For now I'm settling on the 2.5mm AF so I can easily MTL and do a fairly restricted DL with it. Options, gotta love 'em.

My MF Peach recipe is pretty nice and smooth. I skipped doing a SFT with that one and just went for something I knew would work well for testing.

MF Peach 0.8%
FLV Vanilla Pudding 1%
FLV Cream 0.5%

I will add a cake, pie crust or cookie to it for some kind of foundation. Not sure which one yet. Any thoughts or ideas???

For my tastes I’d go with biscuit. Just me, lol.

and maybe a touch of graham cracker

 

[FranC]

Hi. Good afternoon and all that jazz!

So far today, I've fixed a kitchen plumbing problem and replaced a kitchen light fixture. Have a few loads of laundry going currently.

Also tried out a few different airflow inserts in one of my Dvarw RTA's. For now I'm settling on the 2.5mm AF so I can easily MTL and do a fairly restricted DL with it. Options, gotta love 'em.

My MF Peach recipe is pretty nice and smooth. I skipped doing a SFT with that one and just went for something I knew would work well for testing.

MF Peach 0.8%
FLV Vanilla Pudding 1%
FLV Cream 0.5%

I will add a cake, pie crust or cookie to it for some kind of foundation. Not sure which one yet. Any thoughts or ideas???

You also just reminded that peach is another burnout flavor for me that I need to try again.

 

[hittman]

Hi. Good afternoon and all that jazz!

So far today, I've fixed a kitchen plumbing problem and replaced a kitchen light fixture. Have a few loads of laundry going currently.

Also tried out a few different airflow inserts in one of my Dvarw RTA's. For now I'm settling on the 2.5mm AF so I can easily MTL and do a fairly restricted DL with it. Options, gotta love 'em.

My MF Peach recipe is pretty nice and smooth. I skipped doing a SFT with that one and just went for something I knew would work well for testing.

MF Peach 0.8%
FLV Vanilla Pudding 1%
FLV Cream 0.5%

I will add a cake, pie crust or cookie to it for some kind of foundation. Not sure which one yet. Any thoughts or ideas???

Maybe some CNV sponge cake?

 

[FranC]

and maybe a touch of graham cracker

Not a bad idea. Hope you’re feeling better, shad

 

[DLKnives]

Hey all,

Man it got cold here almost overnight! I went to my dr. appt yesterday in shorts and a t-shirt and that was a mistake - it was in the 50's with a freezing wind! So today it's thermal undershirt and sweatpants. I know that is not cold to some here but after being 90 it's like the middle of winter!