Raven Warning: It's going to happen!

[VapingTurtle]

I don't know, but I will about guarantee that this is going to happen. It has happened before, and it will happen again.

The GotVapes PHOENiX Raven™ is a hit. They work really well for most folks who have tried them. (Nothing works for everyone.)

And, just like the Vision Stardust and the Vision Vivi Nova before them, they will become very popular.

Other vendors will carry them, or previous versions of them, or copies of them from different manufacturers. Some will be just as good, some won't. The trademarked name will be copied to many different products that are not as good as the GotVapes version that Chris Olic has worked so long and hard along with the manufacturer to perfect.

Some people will get inferior copies of this product, and then come here to the GotVapes forum to complain. It has happened, and it will happen.

Get the GotVapes PHOENiX Raven™ at GotVapes^®, or take your chances. I'm sure many reputable vendors will carry the authentic Raven. And I'm sure that many otherwise reputable vendors will carry knockoffs. Some will tell you, and some won't.



But in the future, whenever you see someone complain about the Phoenix Raven, find out where they got their Raven and call them out on it if it is not the genuine latest version; the one that Chris, Danno, and GotVapes^® have brought to you.


Just sayin'...

 

[badkolo]

thanks turtle, but just to let everyone know, no other vendor is allowed to call the product The PHOENIX RAVEN,

as he mentioned, by from gotvapes to ensure your buying the actual version we worked on, hope you love the raven and thanks turtle

 

[AG51]

 

[VapingTurtle]

thanks turtle, but just to let everyone know, no other vendor is allowed to call the product The PHOENIX RAVEN...

Trademarked/exclusive names never stopped 'em before, even for unrelated products like the ST Vivi Nova for a rebuildable.

 

[jazon1]

are these just carto tanks with proprietary cartos??

 

[VapingTurtle]

are these just carto tanks with proprietary cartos??

Yes, but... those cartos are so new, so good, and so different... I'd call it revolutionary.

 

[rdsok]

are these just carto tanks with proprietary cartos??

They are just carto tanks... but they have a standard size XL carto.

What is different is that they are bottom coil and don't use any filler. Previous versions without filler were CE2 top coil types and they never took off

 

[jazon1]

oh nice ill have to try some do the carto's fit any xl tank or just the raven?

 

[rdsok]

oh nice ill have to try some do the carto's fit any xl tank or just the raven?

They are flanged but without the flat cut out like some use... there is no real standard on carto tanks so you can't say the word "any" really

 

[jazon1]

mostly mean standard as far as diameter,flange dont really effect anything unless its a locking tank

 

[nathkiira]

maybe have all GV ones laser engraved ..then there can be no doubt! .. just a thought

 

[nathkiira]

oh nice ill have to try some do the carto's fit any xl tank or just the raven?

mostly mean standard as far as diameter,flange dont really effect anything unless its a locking tank

i put one in a 25mm (diameter) pyrex tank .. worked ..just built up lots of pressure (its upwards of 6x+ the capacity of the raven tank) they work great as long as you equalize the pressure if you notice any gurgle

 

[jazon1]

i put one in a 25mm (diameter) pyrex tank .. worked ..just built up lots of pressure (its upwards of 6x+ the capacity of the raven tank) they work great as long as you equalize the pressure if you notice any gurgle

cool thanks might have to order a few of the cartos to try out in a few on my tanks

 

[nathkiira]

cool thanks might have to order a few of the cartos to try out in a few on my tanks

get at least one full raven with the tank too .. so you can compare

and a tip ..been mentioned before .. make sure you pull the raven so the slits are below the oring when filling to avoid any potential issues =)

 

[VapingTurtle]

quoting myself from the main Raven thread...

Hi! Do you know if Ravens are regular carto size and will work in a Smoktech UDCT tank?

Yes, will it fit the UDCT tank and also the AGR tank?

YES... they are regular tank carto sized (50mm, usually called XL).

SORTA/KINDA... they fit in the UDCT with a tiny gap at the bottom screw-on piece. The flange on the Raven is a full circle, so it does not fit in to, or lock in to the slots on the UDCT.

NO... it will not fit with the AGR Tank. The AGR requires a carto without a flange.

 

[rdsok]

mostly mean standard as far as diameter,flange dont really effect anything unless its a locking tank

I find that people in general will misunderstand even clear plainly spoken information... so I try to be specific to avoid any misunderstanding that I can... I just hate those "yeah but you said" conversations when they can be avoided by being a bit more specific

 

[AG51]

I find that people in general will misunderstand even clear plainly spoken information... so I try to be specific to avoid any misunderstanding that I can... I just hate those "yeah but you said" conversations when they can be avoided by being a bit more specific

Can you please be alittle more specific in your answer RedSock ? I don't understand what you said dere


......okay, I'll go sit by the cactus now

 

[rdsok]

Can you please be alittle more specific in your answer RedSock ? I don't understand what you said dere

I most certainly can.... since you asked for it ( warning, the following contains some technical specs, please skip if you think they will blow your mind )

Total length including 510 connector = 50.9 mm ( @ 2.0039" )
Length from top to bottom of flange = 46.6 mm ( @ 1.8346" )
Diameter of carto tube = 9.12 mm ( @ 0.359" )
Diameter of flange = 11.95 mm ( @ 0.47" )
Inside diameter of top of tube = 8.6 mm ( @ 0.34" )
Distance from top of flange to bottom of wick slot = 9.42 mm ( @ .371" )

The vents for the carto are found just about the threading on the 510 connector... there are two, one on each side.

The mm is short for millimeter, the @ symbol means about... the " symbol means inches.

......okay, I'll go sit by the cactus now

Oh, I see... you were just teasin' me again... thankfully I have a thicker skin than zippy or I'd be a cryin'

 

[AG51]

I most certainly can.... Oh, I see... you were just teasin' me again... thankfully I have a thicker skin than zippy or I'd be a cryin'

Love you RedSocks !

 

[VapingTurtle]

... the @ symbol means about...



Oh, I see... you were just teasin' me again... thankfully I have a thicker skin than zippy or I'd be a cryin'

I thought the ~ symbol meant "about"... now I'm gonna be a cryin'.