This also an option ..... leave it airy and those that want tight draw
510 Stainless Steel AFC Air Flow Control Drip Tip
S&S MODS Home of the DEFCON RE-BUILDABLE ATTY
- Thread starter Chopper71
- Start date
- th_trl_thread_readers 0
- Status
This also an option ..... leave it airy and those that want tight draw
510 Stainless Steel AFC Air Flow Control Drip Tip
Good evening, night, and to some mornning 
Chopper you made me feel like the Oracle of Wicks
I have put a few posts up on the previous page on wick tips and tricks, but I will rethread here with some additonal points
If you are using a 3.7v device, I would not go more than a 4 or 5 wrap at most
If you are getting to much TH and little vapor, hold your device at about 2 o'clock or 3'oclock when you vape. Gravity is king and will help the wicking
Make sure you do not have a short anywhere, check to make sure that the electrodes are not touching the wick in any way.
You may have a vaccum in the tank, and juice cannot wick, take your filling syringe, and pump a little air into the filling hole to clear any vaccum that may be formed. Do not pump to much in there or you will get a juice volcano
If you are overwicking, as chopper said close the top of the wick off, this will help.
The most important part - patience, all Genesis Style Attys take some time to adjust to, be patient, do not overthink the process, have some fun tuning to get those monster clouds of vapor!!!!!
Chopper you made me feel like the Oracle of Wicks
I have put a few posts up on the previous page on wick tips and tricks, but I will rethread here with some additonal points
If you are using a 3.7v device, I would not go more than a 4 or 5 wrap at most
If you are getting to much TH and little vapor, hold your device at about 2 o'clock or 3'oclock when you vape. Gravity is king and will help the wicking
Make sure you do not have a short anywhere, check to make sure that the electrodes are not touching the wick in any way.
You may have a vaccum in the tank, and juice cannot wick, take your filling syringe, and pump a little air into the filling hole to clear any vaccum that may be formed. Do not pump to much in there or you will get a juice volcano
If you are overwicking, as chopper said close the top of the wick off, this will help.
The most important part - patience, all Genesis Style Attys take some time to adjust to, be patient, do not overthink the process, have some fun tuning to get those monster clouds of vapor!!!!!
just a little more than 2 hrs till chopper turns vet ...... i'll be sound asleep by then but here goes!
chopper, i know you're busy and this comes first now but try to stop by; tweety and nat will be watching for you!
chopper, i know you're busy and this comes first now but try to stop by; tweety and nat will be watching for you!
Does anyone have any links on best deals for Kanthal or mesh? I'd like to get some in before my DC shows up This is going to be my first rebuildable so I'm a little nervous but excited at the same time.
Thanks in advance!
This is going to be my first rebuildable so I'm a little nervous but excited at the same time. Thanks in advance!
hello everyone i just read all 27 pages of the thread and now WANT ONE BAD!!!!!!!!! P.M. sent.
Heres the mesh I ordered today. I havent found any wire yet as I still have a bunch. I am looking tho, I will post when I find if nobody else does first.Does anyone have any links on best deals for Kanthal or mesh? I'd like to get some in before my DC shows up
Thanks in advance!
WOVEN WIRE MESH STAINLESS STEEL 400 MESH 12"X12" FILTRATION | eBay
To the father of the DefCon (and a kid or 2 from what I understand),
Congratulations on the successfull release of your first couple of products, and finally getting the status of becoming a veterinarian. Now not only are you qualified to work on rebuildable attys, but you may now also work on live animals. You are going to have to keep the animal division of S&S Mods local, as shipping of live animals can get expensive.
So from all of us Defconians, full size and mini alike, we thank you and wish you well in all your future business ventures, weather they breath oxygen or vapor.
Congratulations on the successfull release of your first couple of products, and finally getting the status of becoming a veterinarian. Now not only are you qualified to work on rebuildable attys, but you may now also work on live animals. You are going to have to keep the animal division of S&S Mods local, as shipping of live animals can get expensive.
So from all of us Defconians, full size and mini alike, we thank you and wish you well in all your future business ventures, weather they breath oxygen or vapor.
Congrats Chopper on the Vet status
Got my DC to day looks killer did a dry run need to load it up and fire it off. I am exhausted from work It may have to wait till morning.
Question: What is the easiest way to fill the DC. On my other atty like this one there is a hole at the top. I dont see one on the DC.
Fit and finish is wonderful.
Got my DC to day looks killer did a dry run need to load it up and fire it off. I am exhausted from work It may have to wait till morning.
Question: What is the easiest way to fill the DC. On my other atty like this one there is a hole at the top. I dont see one on the DC.
Fit and finish is wonderful.
Wish you were closer Chopper, I need a good one for my cats and the ones around here suck lol
Gratz on becoming a vet.
Gratz on becoming a vet.
- Status
Similar threads
- Locked
