I also would like to get some sleeves, for the standard cap, for both sizes, mabe next batch. I am a bit surprised though my shipment arrived in my state, and was shipped to my post office. I guess not all postal workers had the day off today.
- Status
Here ya go.....VegasBindery
I think I may be the only one who didn't particularly like anything Serenity Gear had when they did have more ProVari stuff in stock.
Ocelet posted Parish before- I see a purchase from them in my near future.
Got two on order from parish...checked status tonite ans says "processing", will post pics when I get them.
I posted the Vegas one too. Someone posted a video on another thread, which I didn't look at closely, but PBusrado may have done a review on VegasBindery; who didn't answer my email so far.
Damn.. If I had the extra vape-budget this month, either the extended Flames, or Morocco would be mine... 
Rats! Nothing for me either. I want full-size with standard cap. I really like the look for the Morocco design (he has a similar one with the same stamps, but no holes; I forget what it's called) and I almost got one, but it doesn't have a cut-out for the LED screen. That's a deal breaker for me, I like to play with my screen, why else would I have gotten it in blue? Anyway, I tried to special ordered one with a cut-out when I got my first sleeve, but Tim kept saying the design wouldn't be the same in the back, He couldn't seem to comprehend that I didn't care, until I finally gave up. Oh well, I love my spiders.
I'm crossing my fingers for a sleeve for me soon.
Thanks everyone for keeping this thread updated, I forget to check sometimes.
I want full-size with standard cap. I really like the look for the Morocco design (he has a similar one with the same stamps, but no holes; I forget what it's called) and I almost got one, but it doesn't have a cut-out for the LED screen. That's a deal breaker for me, I like to play with my screen, why else would I have gotten it in blue? Anyway, I tried to special ordered one with a cut-out when I got my first sleeve, but Tim kept saying the design wouldn't be the same in the back, He couldn't seem to comprehend that I didn't care, until I finally gave up. Oh well, I love my spiders.I'm crossing my fingers for a sleeve for me soon.
Thanks everyone for keeping this thread updated, I forget to check sometimes.
Last edited:
Rats! Nothing for me either.
I'm crossing my fingers for a sleeve for me soon.
Thanks everyone for keeping this thread updated, I forget to check sometimes.
That sux, so he refused to make an attempt at changing the design for a cutout on the Morocco? I want almost the same thing, just standard sleeve Morocco instead of flexi sleeve.
Lol! He didn't refuse, it sort of didn't compute.
So why don't you just make 10 louder?
Well, ummm...these go to eleven
oh!
I have looked at the other couple of leather makers and none tweak my interest. I really like the Serenity designs the best. Maybe I will have a go at explaining what I want. Wonder if it is possible with all the little holes on the Morocco, that the big cutout for the window on the same side as the D-ring tab, creates a weak area or something? Just taking a guess at some possible reasoning.
BTW Ocelot, something cool you may want to consider. I just got in my custom sand blasted tanks yesterday (will post some pics soon). Phiniac will custom sand blast any glass tank tubes. I mailed them my Loki tank tube and a IBTanked tube, picked out the design (dragon on one, custom radiation symbol on the other), asked for white fill in and they did it for me. That way you could get your little spider design on the tank to match your case. Anyway, just a thought!
oh!
I have looked at the other couple of leather makers and none tweak my interest. I really like the Serenity designs the best. Maybe I will have a go at explaining what I want. Wonder if it is possible with all the little holes on the Morocco, that the big cutout for the window on the same side as the D-ring tab, creates a weak area or something? Just taking a guess at some possible reasoning.
BTW Ocelot, something cool you may want to consider. I just got in my custom sand blasted tanks yesterday (will post some pics soon). Phiniac will custom sand blast any glass tank tubes. I mailed them my Loki tank tube and a IBTanked tube, picked out the design (dragon on one, custom radiation symbol on the other), asked for white fill in and they did it for me. That way you could get your little spider design on the tank to match your case. Anyway, just a thought!
He kept saying it would mess up the pattern. I couldn't figure out why he couldn't skip stamping that area...I don't know, I've never tried leatherwork. I know we had a couple of other things where we seemed to fail to communicate. I know it hard to believe, but there are some people who just don't get me.
I'm used to it though and know pretty fast when to give up.If you scroll down, "Baroque" was the other one I liked. It's the "Morocco" design with the holes punched in it.
He kept saying it would mess up the pattern. I couldn't figure out why he couldn't skip stamping that area...I don't know, I've never tried leatherwork. I know we had a couple of other things where we seemed to fail to communicate. I know it hard to believe, but there are some people who just don't get me.
If you scroll down, "Baroque" was the other one I liked. It's the "Morocco" design with the holes punched in it.
Yeah, I have no clue on the leather work either. Oh well.
BTW, I think you meant to say "It's the Morocco design without the holes punched in it"? As the Baroque has no holes. But who knows, I could be drunk. haha
Last edited:
But the Dragon Hide does, doesn't it? How much different in basic style is that from a basket weave? I'm think perhaps the problem might have been that the screen is rectangular and the Morocco stamps are, ya know, round...
Yeah, my Dino hide has window cutout. I am not sure on the designs though. Was talking with a coworker the other day who has leather working tools and they stated some designs were made with a large pattern plate. Unfortunately they just had the tools and haven't had time to learn how to use them.
BTW, here are my custom sand blasted tanks!
http://www.e-cigarette-forum.com/fo...they-also-do-custom-designs.html#post11032364
http://www.e-cigarette-forum.com/fo...they-also-do-custom-designs.html#post11032364
You're custom tanks look great!! I have a Loki... I might have to send in
I received the serenity gear sleeve I ordered last week. I got the plain black that was for the provari mini with extended battery. I ripped open the package and slapped it on... but it was at least 1/2" too long!
Did I order the wrong size?? I have a mini with the extended cap you buy from provape that makes it take the 18490 battery.
I'm not sure if I should try to return/exchange it or just try to sell it in in the classifieds... I want the correct one though!
I received the serenity gear sleeve I ordered last week. I got the plain black that was for the provari mini with extended battery. I ripped open the package and slapped it on... but it was at least 1/2" too long!
Did I order the wrong size?? I have a mini with the extended cap you buy from provape that makes it take the 18490 battery. I'm not sure if I should try to return/exchange it or just try to sell it in in the classifieds... I want the correct one though!
You're custom tanks look great!! I have a Loki... I might have to send in
I received the serenity gear sleeve I ordered last week. I got the plain black that was for the provari mini with extended battery. I ripped open the package and slapped it on... but it was at least 1/2" too long!
I'm not sure if I should try to return/exchange it or just try to sell it in in the classifieds... I want the correct one though!
Thanks, love the tanks!
On your sleeve, so the buttons don't line up with the holes when placed in the sleeve? If so, all the sleeves have about a half inch space at the bottom, but it is a smaller hole so the Provari doesn't go in it or slip out. He does that so you can stick your finger in there to push it out (that just sounds very wrong...but oh well).
You're custom tanks look great!! I have a Loki... I might have to send in
I received the serenity gear sleeve I ordered last week. I got the plain black that was for the provari mini with extended battery. I ripped open the package and slapped it on... but it was at least 1/2" too long!
I'm not sure if I should try to return/exchange it or just try to sell it in in the classifieds... I want the correct one though!
They have almost an inch of sleeve that extends beyond the battery, are you talking about more than that?
You beat me to it! I have a feeling that's what it is. Mine are all pliable now. Me like.
Your tanks look great!
- Status
Similar threads
