Small MTL rta?

Status
Not open for further replies.

MsLoud

Ultra Member
ECF Veteran
Verified Member
Dec 16, 2013
2,396
9,528
Spheroid, MiniAtty/MiniDrip - if you're into rebuilding. I still enjoy the Aerotank Mini as well - with the VOCC coils.

Spheroid is my most favorite tank though. It's just perfect for me. I have the v4 (though the v2/3 is divine for MTL) the v4 needs some tweaking to get it just right. I finally settled on a 2mm coil with the airflow at half open using the no-fluff deck topper.
 

93gc40

Vaping Master
ECF Veteran
Oct 5, 2014
3,461
2,663
California
What do you mean by small?

I just got a Nectar from FT. Is single coil RTDA style mine is like 3-4ml but are available as 2ml and a 1ml dripper. Is single coil with tiny chamber. MTL to tight DL draw. Good flavor.. not going to say KFL good yet but pretty close.


Sent from my SCH-I605 using Tapatalk
 

93gc40

Vaping Master
ECF Veteran
Oct 5, 2014
3,461
2,663
California
I keep looking at the Merlin Mini...

There are so many tanks out there and I just can't decide what to try next.
Yeah I'm also looking at Merlin.. and the Serpent alto an the Ammit single coil.... the concern i have is these are all gear to builds and coil sizes that don't lend well to MTL... they are said to be able to do mtl. But they are all relatively airy looking.... for me having a tight draw is not all it take to be MTL capable. Internal air volume to me affect the flavor and flow requirement more than the draw.

Sent from my SCH-I605 using Tapatalk
 
  • Like
Reactions: ricks

ricks

Vaping Master
ECF Veteran
Verified Member
Jan 11, 2011
7,245
10,303
61
Moscow PA
Yeah I'm also looking at Merlin.. and the Serpent alto an the Ammit single coil.... the concern i have is these are all gear to builds and coil sizes that don't lend well to MTL... they are said to be able to do mtl. But they are all relatively airy looking.... for me having a tight draw is not all it take to be MTL capable. Internal air volume to me affect the flavor and flow requirement more than the draw.

Sent from my SCH-I605 using Tapatalk
The regular Merlin works well for me MTL. I'm looking at the Serpent Alto too. The Ammit does not interest me at all... looks like way too much air gets to the coil for MTL.
 

benley73

Ultra Member
ECF Veteran
May 2, 2016
1,382
2,219
52
The SRV4 RTA , can do MTL if you buy the nano kit 5ml single coil and can handle DTL , and MTL when using the Reduced Airflow pin that supplies the coil ,
Also The Hussar RTA , Coppervapes perfect for MTL , So is the Coppervapes Skyline ,mine is on its way in post , these are Clones of high end very high priced RTA,s from 100-200Euros , but clones are 20-30 USD and actually very good quality builds , im using the
Hussar RTA ,
SRV4 RTA
Kayfun V5
V5 mini
Taifun GTv3
TF GTV3 mini
Origen MK II MTL RDTA
Kayfun V4
Ser Fev V4 RTA which s phenomenally good Flavours and can be super restricted MTL
Even with the single Airflow plug removed
There 2 others that are very tight draw ,
(bit too much for me )
I like kind of in between
Also The Hurricane V2 RTA comes with 3 decks which include different sized Airflow holes for DTL MTL single coil build deck, Single large bottom adjustable airflow




Sent from my ONEPLUS A3003 using Tapatalk
 
  • Like
Reactions: Opinionated

benley73

Ultra Member
ECF Veteran
May 2, 2016
1,382
2,219
52
Yeah I'm also looking at Merlin.. and the Serpent alto an the Ammit single coil.... the concern i have is these are all gear to builds and coil sizes that don't lend well to MTL... they are said to be able to do mtl. But they are all relatively airy looking.... for me having a tight draw is not all it take to be MTL capable. Internal air volume to me affect the flavor and flow requirement more than the draw.

Sent from my SCH-I605 using Tapatalk
You want a single coil small chamber have a look at Skyline RTA clone by Coppervapes , 8 Air disks , Reduced chamber ,single coil , perfect MTL ,

Sent from my ONEPLUS A3003 using Tapatalk
 
  • Like
Reactions: Steamer861

mansis

Senior Member
ECF Veteran
Verified Member
Feb 26, 2015
94
197
Costa Mesa,CA

MoodyB

Full Member
Jan 10, 2015
10
27
Scotland

Yes. My favourite RTA for MTL when compared to the Pico & Cloud One RTA clones from FT, the 25mm Siren, the Augvape Merlin and the Goblin Mini v3.

I'll second everything mansis said above. It's very simple to use & wick. And never leaks.

Only minor downsides are a bit of gurgling when refilled for 2-3 draws, and it is bottom fill only.

( Btw the SJMY replacement frosted tanks work fine with the SXK version of the Doggystyle )

Out of the SXK Doggystyle, Cloud One & Pico RTA's, I'd rate the Doggystyle 1st for flavour, Cloud One & Pico tied for 2nd place and Pico with a CLR coil last.

For throat hit (7mg juice here) again the Doggystyle wins, but only just when compared to the Cloud One. Pico comes 3rd.

For building the Doggystyle & Pico are tied for 1st. Cloud One is a little bit fiddly.
 
  • Like
Reactions: ricks

ToolmanTexas

Ultra Member
ECF Veteran
Verified Member
May 14, 2014
2,747
14,648
T for Texas!
Status
Not open for further replies.

Users who are viewing this thread