Sneak Peak: The Hybrid 306/510 Atomizer
- Thread starter AlmightyGod
- Start date
- th_trl_thread_readers 0
- Status
Hey, just happy to help other vapers. Some int'l shipping is pretty high. I have also found not all these first run attys spec within 0.01, so I keep those and only will send those that spec right. Much easier for me to return if needed. I'm certain Brian is working on that as well as many other offerings while he is over there. As long as I'm already ordering and going to the post office, it's not a big deal and combining orders yields free shipping from Vapage ;-)
Good to know you have a good reputation as stated by some other members. Even better you are so helpfull. I am waiting for a mod I just ordered from an ECF member, that hopefully arrives here in a week. Once I have it, I would be very happy to ask for your help, ordering some of these hybrid attys. Thank you for your offer once again.
Seriously,
That's so nice of you tierrataz.
People like you in this forum make me feel so warm.
I don't have many friends in real life who would do that for me.
Exactly! That's why I figured I should meter ones going to emonty. He and I have done quite a bit of swapping. No point sending any DOA or out of spec when they are a mere 2 hours south of me. Now my DMM is no fluke, but decent enough for this purpose.
It's very kind of you, tierrataz. If any of the attys I ordered would be faulty I wouldn't send them back due to the cost.
Yes, there are some wonderfull people here at ECF, like tierrataz, who are doing, offering favors to other people he doesn´t even know, other then from the forum. I am with Chet, it gives you some warm feelings seeing people act this way.
here are pics of the changes being made to the next batch of hybrids.......Enjoy!
These are the changes being made in the next batch:
The coils are pretty. They are consistent and centered to give better/consistent vapage.
The connecter pin is new; it is now 1.3mm; down from 1.6mm to give better mouth draw. The
Venturi end is smaller now (lower profile) to fit ALL 510 connectors.
A new "lower" washer seal is now included on all Hybrid BF sold to work with the floating connector issue of the REO mod. It also works with the VMOD same as always.
The inner wires are now away from the Venturi hole so the airflow is consistent
All Hybrids come dry, and are metered before packaging. This results in almost zero DOA's, and +/- 1ohm of spec
....Enjoy!
These are the changes being made in the next batch:The coils are pretty. They are consistent and centered to give better/consistent vapage.
The connecter pin is new; it is now 1.3mm; down from 1.6mm to give better mouth draw. The
Venturi end is smaller now (lower profile) to fit ALL 510 connectors.
A new "lower" washer seal is now included on all Hybrid BF sold to work with the floating connector issue of the REO mod. It also works with the VMOD same as always.
The inner wires are now away from the Venturi hole so the airflow is consistent
All Hybrids come dry, and are metered before packaging. This results in almost zero DOA's, and +/- 1ohm of spec
Do these changes include the "limited" run of alternative resistances that they just started selling? Or is this something yet unshipped? Does Vapage have anybody official on ECF to ask these things of in-forum BTW?
And you meant .1ohm... because 1ohm was the situation causing people fits w/ the G4s. ;-) -Magnus
And you meant .1ohm... because 1ohm was the situation causing people fits w/ the G4s. ;-) -Magnus
One of the owners is a Registered Supplier.......but I have a feeling too busy getting these atties made in China as we speak to set up a forum here at this time. I wouldn't be surprised if he's bringing them back in his luggage! He'll need more than an overnight case! LOL
here are pics of the changes being made to the next batch of hybrids...
The coils are pretty. They are consistent and centered to give better/consistent vapage.
The connecter pin is new; it is now 1.3mm; down from 1.6mm to give better mouth draw. The
Venturi end is smaller now (lower profile) to fit ALL 510 connectors.
A new "lower" washer seal is now included on all Hybrid BF sold to work with the floating connector issue of the REO Mod. It also works with the VMOD same as always.
The inner wires are now away from the Venturi hole so the airflow is consistent
All Hybrids come dry, and are metered before packaging. This results in almost zero DOA's, and +/- 1ohm of spec
This is too cool! Getting better all the time.
Thank you violetvoo!
It's great that we can see this in the quality control phase. Gives me a sense of ease.
Al
Al
I appreciate that everything we have talked about improving on this atty has been addressed.
The draw, o-ring, coil placement, QC on ohm consistency, the barbed center pin removed, & still no primer.
Way to go Brian...the Hybrid looks great!
I think they are supposed to be in the states in a few weeks at the most.
*queue 007 music*
They get bonus points for delivering the revised Hybrids via hidden compartments in cans of Dr. Pepper. -Magnus
They get bonus points for delivering the revised Hybrids via hidden compartments in cans of Dr. Pepper. -Magnus
- Status
Similar threads
- Locked
- Locked
