SvoёMesto KAYFUN 4
- Thread starter qorax
- Start date
- th_trl_thread_readers 0
- Status
Nice vid about dual coils in the V4 (clone used, but thats not the point). This post is not about the dual coils.
What caught my attention, was the teenie tiny bit where the reviewer used a small drill bit to angle the ends of wicks straight down to the juice ports. Going to try that next time I wick. I always end up with a bit too long wicks. They wick very well, but the ends point upwards.
Nice little tweak (for me as a newbie at least).
R
What caught my attention, was the teenie tiny bit where the reviewer used a small drill bit to angle the ends of wicks straight down to the juice ports. Going to try that next time I wick. I always end up with a bit too long wicks. They wick very well, but the ends point upwards.
Nice little tweak (for me as a newbie at least).
R
Last edited:
Tried the video above today as well as the one below. After about 45 minutes of trying each the inline dual coils seems to be giving me a better vape. Fires up very quickly and the flavor/vapor/warmth is better than a standard single coil. Kinda funny I tuck my wicks exactly like he does.
Last edited:
I'm definitely going to give it a try when mine gets here.
Sent with no malice and not a whole lot of forethought from my new Galaxy Tab 4. Thanks Santa!
Sent with no malice and not a whole lot of forethought from my new Galaxy Tab 4. Thanks Santa!
Placed my order for the Kayfun 4 at Vapin Art. I always get paranoid about buying from a site that I haven't ordered from with all the clones and whatnot going around. I'd be ...... spending 180 for something come to find out later that it's a replica.
Does anyone know what the deal is with Vapin Art? I thought Vaperev was the distributor for Svoemesto here in the states. I would have figured Vaperev would have these in stock prior to any other company.
Does anyone know what the deal is with Vapin Art? I thought Vaperev was the distributor for Svoemesto here in the states. I would have figured Vaperev would have these in stock prior to any other company.
Vapinart is a great site, I just got a Vaporflask from them and 2 sony vtc5 batteries and everything was great and shipped fast. I don't think they sell clone crap on their site, haven't seen them on their so I wouldn't worry. Vaporev always has everything out of stock but they are also another vendor, I have never ordered anything from them because they are always out of stock.
Last edited:
VapeRev still has KF4's in stock...at least in their B&M...
Picture Postcards from Paris
Toronto Airport
In Flight
Paris Airport
Not showing up for me for some reason, but...enjoy!
Don't blame you and I've learned a big lesson. My next K4 will only be purchased by Authorized dealers. I'm going to take pics of my counterfeit (seller refunded me a bunch of money to clone price-I wanted to keep it just to play around with it till I can get an authentic) and write down all the differences I can find between the counterfeit and the authentic.
The packaging is super close, but have found a few differences already just by checking out YT and pictures over the net. Unfortunately, many of these differences I wouldn't have been able to tell without having this one in my hands.
What upsets me that i c'ant make it work right (Kayfun V4) with Ni200 on my DNA 40 box mod. I have built the coil perfect, in all possible ways.
I set 16 Watts, but when i push the fire button, after a secound or two, the watts jump at 39, and then i got a very hot vape, and stay there for a 1-2 sec, then returns to the set value, 16 W and stay there for the rest of puff.
With Kanthal, works great.
With V4A SS (AISI 316L) works excelent (better taste, IMO), but noticed that coil is constant change -0,25 <-> +0,25 ohm.
I set 16 Watts, but when i push the fire button, after a secound or two, the watts jump at 39, and then i got a very hot vape, and stay there for a 1-2 sec, then returns to the set value, 16 W and stay there for the rest of puff.
With Kanthal, works great.
With V4A SS (AISI 316L) works excelent (better taste, IMO), but noticed that coil is constant change -0,25 <-> +0,25 ohm.
Heya Ang...
If you wouldn't mind listing all those differences you find, I feel it would be beneficial to those of us who wish to avoid the clones and counterfeits...
I know some others don't mind buying the clones, but I'm pretty sure nobody supports the counterfeits, as we've all basically stated that those are theft.
I would also like to invite anyone else who has an authentic and non-authentic to list the differences they notice.
Even though clones are supposed to be 1:1 copies, I know sometimes they are definite changes made.
For example, the EHPro KFL+ V2 has two air holes and two "control" screws on the bottom. While that is a beneficial change (for some), other differences might be detrimental to its performance.
Last edited:
Yeah unfortunately a lot of folks are having problems with the KF4 and the Ni200 builds.
That's because the KF4 was designed before temp control had really taken off, so it wasn't really meant for that type of use. Sure, a few have gotten it to work just fine, but for all intents and purposes, the KF4 has been stated to be a Kanthal atomizer.
I certainly hope that the next version will be able to do the Ni200 builds without a hitch. It would be nice to see SvoëMesto stay on top of industry movements like that. Of course, more time and research must be done on temp control, to see if it really IS a beneficial mode of vaping. While I don't doubt that it is, I'm just being cautious because, let's face it, this is vaping we're talking about...trends hit the industry and fail all the time.
Nice. I was in Paris a few months ago although it should be more interesting now with all the military guarding the streets and such.Picture Postcards from Paris
Toronto Airport
In Flight
Paris Airport
What did surprise me last time I was there was figuring out where the parisiense hide their kids. Travelling with two of my own, I was expecting seeing much more little brads around, especially on a weekend but no, almost no kid to be seen.
Enjoy the city
Regards
Tony
Sent from my GT-I9195 through Tapatalk
"Je suis Charlie" - R. I. P.
- Status
Similar threads
- Locked
