Svoemesto Kayfun Mini V3

[AngiBe]

Is the consensus on the KM3 so far that it performs better at higher ohms? Like around 1.5-2.0? Just curious if anyone has built around .40-.70 and how it seems to be performing.

Also after reading up and watching vids, the only thing for me that is a bit irritating is how to adjust the AFC. I didn't like it with the KF4 and was hoping that design would be reworked. It's not a huge problem or anything but just kind of a PITA

 

[Saltwater]

Is the consensus on the KM3 so far that it performs better at higher ohms? Like around 1.5-2.0? Just curious if anyone has built around .40-.70 and how it seems to be performing.

Also after reading up and watching vids, the only thing for me that is a bit irritating is how to adjust the AFC. I didn't like it with the KF4 and was hoping that design would be reworked. It's not a huge problem or anything but just kind of a PITA

I've only built between 1 and 1.4 with it but have only had it a couple days. I think it has alot more throat hit than some of my others, but it's a smoother vape. I want more punch than most "tootle" (I hate that word) atties give, but less than sub ohm, so this is perfect for me.

I didn't buy the k4 because of the juice flow (turn it this way for this, that way for that). The v3 is easy. Just fill it up, turn it to open. I've run it one turn open and two turns open and no flooding. If you want to rewick just keep turning till the bottom comes off. Its really easy and would say it IS an improved design.

 

[Saltwater]

Is the consensus on the KM3 so far that it performs better at higher ohms? Like around 1.5-2.0? Just curious if anyone has built around .40-.70 and how it seems to be performing.

Also after reading up and watching vids, the only thing for me that is a bit irritating is how to adjust the AFC. I didn't like it with the KF4 and was hoping that design would be reworked. It's not a huge problem or anything but just kind of a PITA

Also, a few pages back, 87-88, there's a German video building it at 0.6. I can't speak German but you can follow along and see the clouds he puts out with this thing. He looked happy, but he could've been saying it sucked...

 

[TheotherSteveS]

Too Late!!!

Already Ordered.

ahh its ok. I have a code for 5% that might have worked...Not such a big deal!

 

[Asbestos4004]

Is the consensus on the KM3 so far that it performs better at higher ohms? Like around 1.5-2.0? Just curious if anyone has built around .40-.70 and how it seems to be performing.

Also after reading up and watching vids, the only thing for me that is a bit irritating is how to adjust the AFC. I didn't like it with the KF4 and was hoping that design would be reworked. It's not a huge problem or anything but just kind of a PITA

I tried lots of builds. From .5 up to 1.5. My favorite is .26 Ga , 7 wraps spaced on a 2 mm rod. It's at .7 ohms and 20 watts. Vapes great! Although, its pretty hard to find a sucky build with this atty. Everything seems to work well. They obviously used magic.

 

[Bronze]

I didn't buy the k4 because of the air flow (turn it this way for this, that way for that). The v3 is easy. Just fill it up, turn it to open. I've run it one turn open and two turns open and no flooding. If you want to rewick just keep turning till the bottom comes off. Its really easy and would say it IS an improved design.

I think you meant the juice control here not the air flow.

 

[Sockeye404]

I know it is a little off-topic, but I initially posted it in this tread...

Ok, you are eager on news on the new atty by SvöeMesto? Well, I am from Germany and a friend of mine is a Svöemesto tester.

Curious? Well... I needed to swear not to let anything out... But, what I can tell you is, if the German government will not change its mind by the current petition, Svöemsto will not be able to produce it, as it will be forbidden by law to use RTA with more than 2ml capacity.... if RTA's will be allowed at all...

So please, we need at least 50.000 signers by Jan 20th and need your support. If we get the 50.000, the government will have a dedicated parliamentary session for discussing this topic and even give the person who started the petition the chance to express his arguments.

We are nearly there... but you can help! If it is not for the German vapors, do it for your beloved Kayfun.

here: Petition

Thank you for your support and best regards,
Sockeye

I just wanted to give you an update on the status:

There will be a public discussion on this petition in the Bundestag on February 17th and it there will probably be a live stream. Invited are experts from all areas including our worst enemy "Dr. Pötschke-Langer" (we just call her Pöla) but also Prof.Dr. Bernd Mayer who ist one of the (if not the) leading advocates for vaping in Europe.

Thank you for your support to make this possible!

 

[Saltwater]

I think you meant the juice control here not the air flow.

Good catch... fixed that!

 

[VictorC]

stopped by at dashvapes to pick up some juice and came back with this

 

[qorax]

stopped by at dashvapes to pick up some juice and came back with this

Congrats Vicks! And it really looks gr8 atop the Mini Volt

 

[Bronze]

Meanwhile, my KM3 from InTaste was pushed back to Thursday delivery. Ordered on Friday, received the following Thursday. That is a little slow for InTaste/FedEx compared to the past. But I'm a big boy and can handle it.

 

[subwayaznm]

Meanwhile, my KM3 from InTaste was pushed back to Thursday delivery. Ordered on Friday, received the following Thursday. That is a little slow for InTaste/FedEx compared to the past. But I'm a big boy and can handle it.

I would have to say that's not bad. From Cremedevape it's taken 10 days so far & no guess at when it will arrive. The Royal Mail service isn't so Royal IMHO. And we thought USPS was sorry

 

[Carnage9270]

I would have to say that's not bad. From Cremedevape it's taken 10 days so far & no guess at when it will arrive. The Royal Mail service isn't so Royal IMHO. And we thought USPS was sorry

Yeah, I went through Dash Vapes because of that. Haven't had good luck with Royal Mail to the US.

 

[Bronze]

I would have to say that's not bad. From Cremedevape it's taken 10 days so far & no guess at when it will arrive. The Royal Mail service isn't so Royal IMHO. And we thought USPS was sorry

It's actually pretty good. I recall ordering from InTaste and having it on my doorstep two days later.

 

[tchavei]

Unfortunately, royal mail made some agreements which aren't that great for us end consumers.

For international EU shipping for example, royal mail made a deal with GLS.

In order for GLS to show a difference between standard air mail and their courier services, all royal mail headed to any EU country is first shipped to their headquarters in Germany where it then sits for at least 3 days before it's sent to its final destination country.

If you don't believe me, just grab a stock royal mail tracking number (international EU) which is usually in RX111111111GB form and submit it to the GLS tracking service... It will appear as valid and show where the package really is although royal mails website will only state "it's on its way"


Enviado do meu GT-I9195 através de Tapatalk

 

[VapingTurtle]

Yeah, I went through Dash Vapes because of that. Haven't had good luck with Royal Mail to the US.

No need to go to Canada or the EU. They are in-stock in the US at Kayfun Mini V3 by Svoe Mesto - Origin Vape

 

[AngiBe]

Also, a few pages back, 87-88, there's a German video building it at 0.6. I can't speak German but you can follow along and see the clouds he puts out with this thing. He looked happy, but he could've been saying it sucked...

LMAO!!!!!!!!!!!!!!

 

[raitizz]

Unfortunately, royal mail made some agreements which aren't that great for us end consumers.

For international EU shipping for example, royal mail made a deal with GLS.

In order for GLS to show a difference between standard air mail and their courier services, all royal mail headed to any EU country is first shipped to their headquarters in Germany where it then sits for at least 3 days before it's sent to its final destination country.

If you don't believe me, just grab a stock royal mail tracking number (international EU) which is usually in RX111111111GB form and submit it to the GLS tracking service... It will appear as valid and show where the package really is although royal mails website will only state "it's on its way"


Enviado do meu GT-I9195 através de Tapatalk

Why don't you order from inTaste? For me (for the Mini 3) it would be the 2nd cheapest after PinkMule with the discount code. But, as a SM shop customer, I'd order from SM directly (12 EUR DHL).

R

 

[Carnage9270]

No need to go to Canada or the EU. They are in-stock in the US at Kayfun Mini V3 by Svoe Mesto - Origin Vape

This was before they had them. They are available from many US vendors now.

 

[subwayaznm]

Why don't you order from inTaste? For me (for the Mini 3) it would be the 2nd cheapest after PinkMule with the discount code. But, as a SM shop customer, I'd order from SM directly (12 EUR DHL).

R

I had no clue that it would be that bad for a lesson learned for sure. I'll wait the couple of extra days for a vendor here in the states to get it and place the order through them. It still would not have taken this long.