SX Zero 50w Clone

[roxynoodle]

I didn't see that ETA, but I think that ETA was typo as Doris told me that these just shipped over the weekend .. the ETA was 2/12 when I spoke to her last about it. I didn't realize you had ordered another one hun

I ordered two. One for me and one for a friend.

 

[Nikkita6]

Still have my fingers crossed for brass and copper sleeves... heard anything on those?

No I haven't, but I honestly forgot to even ask them lately. After the major production delay I don't think they were even open it at the moment. There was a lot of catch up to play with the SX Zero orders, and then they had to start on the wood. I will start bugging them again after CNY though ;-)

 

[Nikkita6]

I ordered two. One for me and one for a friend.

You are so Big Pimpin these day Rox, I can't

 

[Croak]

I ordered two. One for me and one for a friend.

Can I be your friend?

 

[roxynoodle]

You are so Big Pimpin these day Rox, I can't

He paid me for it The last two times they had stock, they put them up after 11pm. He has to be up early so I said, I'll grab them. Then I ended up pre-ordering them anyway.

I did buy a 50W istick for a very poor friend in a group buy, and I'm giving her my 20W one, but we have a deal. If she doesn't stick to it, I get the mods back . I already bought another friend a ton of stuff a few months ago. She vaped two days and threw it back in the box. I can't afford to throw away money

 

[zer0zer01n]

Nikkita6, with all your connections you didn't happen to get a tracking number or eta or even know if it was able to ship before the weekend did you? Been waiting for so many weeks..

Sent from my using my

 

[Nikkita6]

Nikkita6, with all your connections you didn't happen to get a tracking number or eta or even know if it was able to ship before the weekend did you? Been waiting for so many weeks..

Sent from my using my

You must be psychic you know that? .. My contact left me a skype this morning at around 11:30am saying that her boss said the first 50pcs of Wood SX Zero has shipped, but she didn't say which day, and if they made it out before CNY shutdown

I left a message and asked if she could get a tracking #, so lets see if I get a reply ... The good news is that they shipped, the bad news "may be" that depending on their timing they may not have made it out of Hong Kong in time. Worst case scenario is we will have to wait until CNY is over to have access to them, but at least they are done... well only 50pcs of them.

I expect on going production to be slower than even the SS SX Zero, so there will be lots of restocking in between batches ...

 

[zer0zer01n]

You must be psychic you know that? .. My contact left me a skype this morning at around 11:30am saying that her boss said the first 50pcs of Wood SX Zero has shipped, but she didn't say which day, and if they made it out before CNY shutdown

I left a message and asked if she could get a tracking #, so lets see if I get a reply ... The good news is that they shipped, the bad news "may be" that depending on their timing they may not have made it out of Hong Kong in time. Worst case scenario is we will have to wait until CNY is over to have access to them, but at least they are done... well only 50pcs of them.

I expect on going production to be slower than even the SS SX Zero, so there will be lots of restocking in between batches ...

[emoji12] well let's hope it shipped out before CNY! And here's to wishing that it's not stuck here like another one of my shipments: "February 6, 2015
8:18 pm
Processed Through Sort Facility, XIAMEN EMS, CHINA"

Sent from my using my

 

[Nikkita6]

[emoji12] well let's hope it shipped out before CNY! And here's to wishing that it's not stuck here like another one of my shipments: "February 6, 2015
8:18 pm
Processed Through Sort Facility, XIAMEN EMS, CHINA"

Sent from my using my

LOL, cheers to that! Xiamen and Shanghai EMS are the kiss of death lately, just know you are not alone, they have two of my packages as well.

 

[zer0zer01n]

LOL, cheers to that! Xiamen and Shanghai EMS are the kiss of death lately, just know you are not alone, they have two of my packages as well.

Order was placed Jan 19th [emoji31] lol.

Sent from my using my

 

[Maverickdrinker]

Ooohhh boy!!!!! Hope I can score one!!!!! Thanks for the update

 

[OldtimeRocker]

FYI i had lost the neg battery contact screw the first day i got my hotcig Sx- Zero. I e-mailed Doris asking her if i could buy more . She had them send me 3 more i got the screw kit today took under 2 weeks for the turn around. The screw kit comes with 2 screws and the contact screw for n/c. Just wanted to pass this on as am sure i cant be the only one too loose those tiny screws. So no more screws loose for me ! Well not on my Zero anyways

I had asked about more cover at the same time. They are getting more she just wont know much more until after CNY. For me the sx-zero is a great mod i have been very happy with it. Really looking forward to get some more covers for it.

 

[USMCotaku]

I want one of these mods soooo bad, but I can't even afford the clone prices
Guess I'll just have to look at pics here and dream....... So post more pics, so I can dream some more
Sent with one hand, the other is busy vaping.

 

[roxynoodle]

I want one of these mods soooo bad, but I can't even afford the clone prices
Guess I'll just have to look at pics here and dream....... So post more pics, so I can dream some more
Sent with one hand, the other is busy vaping.

Its only a little more than a carton of cigarettes, and a very good mod for the price. You should try to save up for one.

 

[smplx]

I just got my SX zero and have found some issues and was hoping to find some answers here. I received mine from FC right before the CNY. The problems are.. the sleeve is really loose so i had to bend inward A LOT, then the hex screws are uneven and bulge out, and the batteries are impossible to take out without adjusting the hex screws to loosen the body. Has anyone had similar issues? Did you fix them? or is this just me? Thanks in advance for any information.

 

[gratefulbuddy]

I just got my SX zero and have found some issues and was hoping to find some answers here. I received mine from FC right before the CNY. The problems are.. the sleeve is really loose so i had to bend inward A LOT, then the hex screws are uneven and bulge out, and the batteries are impossible to take out without adjusting the hex screws to loosen the body. Has anyone had similar issues? Did you fix them? or is this just me? Thanks in advance for any information.

Yep, got mine from fc yesterday. The sleeve did require a little bit of massaging to fit snug but nothing major. I removed and sanded down the heads of the hex screws so they are slightly recessed while in place now. Also when reinserting the trimmed screws I tightened the top one until snug then tightened the bottom while testing battery fitment as I went and stopped while the battery was still able to slide in/out freely.
Other than that, no problems so far.

 

[smplx]

Yep, got mine from fc yesterday. The sleeve did require a little bit of massaging to fit snug but nothing major. I removed and sanded down the heads of the hex screws so they are slightly recessed while in place now. Also when reinserting the trimmed screws I tightened the top one until snug then tightened the bottom while testing battery fitment as I went and stopped while the battery was still able to slide in/out freely.
Other than that, no problems so far.

Ya i guess ill try sanding the screw down a bit. Doesn't loosening the body so the battery slides in effect how well the sleeve holds?

 

[gratefulbuddy]

The way I have it adjusted now allows easy battery access and the sleeve stays put just fine

 

[roxynoodle]

I haven't gotten the last two yet. My first one came nearly perfect, but its hard to get the battery out. I should loosen a hex screw a tad.

I did have to press fit the black sleeve I bought for it.

 

[USMCotaku]

Its only a little more than a carton of cigarettes, and a very good mod for the price. You should try to save up for one.

My financial situation is quite a bit worse then when I was smoking......i absolutely couldn't afford cigarettes now. My one and only expensive mod (ZNA50 clone....$120) I was able to get on payments from a local smoke shop that happens to carry a lot of vape gear, because I have spent a lot of time there teaching the shop owner about vaping, do builds for him etc..But he doesn't have these :/