Seems as if I jumped too soon, my apologies for not gathering all the facts I only viewed the picture of the caps un-fitted.
Now since viewing cap fitted I must agree with you guys it looks good and functional.
Last edited:
SXmini M Class (TEMP CONTROL)
- Thread starter whitewidows
- Start date
- th_trl_thread_readers 0
- Status
Seems as if I jumped too soon, my apologies for not gathering all the facts I only viewed the picture of the caps un-fitted.
Now since viewing cap fitted I must agree with you guys it looks good and functional.
I have always been very careful with my caps so as not to cross thread them. The last time I changed the batteries I cleaned them like normal and applied a very thin coat of Noalox on them it really made them easier to get them on correctly. Wish I had done that before.3 of mine have always been pretty easy to get on one was a little harder but now they are all easy.
I'm waiting for the upgrade supposed to come out in December. From what I have heard supposed to be better. I'm very happy with the way my M works on NI200 and Ti even if the Ti mode is not apparently set at the right TCR it works fine on the Ni mode with temp offset and from what I read by TheBloke the new NiFe70 wire will work also wanting to find out more about it.
Last edited:
I'm wondering if anyone is experiencing the same thing I'm seeing.
I'm using the VS Ni Atlantis coils with an Atlantis tank. Over the last few weeks or so, I have gotten a few dry hits. IT very well could be since doing the firmware upgrade.
Either way, I am not seeing the dry coil display and it doesn't seem to be detecting when the coil is too dry. Anyone have any idea what's going on?
I'm running at 50J 450F.
I'm using the VS Ni Atlantis coils with an Atlantis tank. Over the last few weeks or so, I have gotten a few dry hits. IT very well could be since doing the firmware upgrade.
Either way, I am not seeing the dry coil display and it doesn't seem to be detecting when the coil is too dry. Anyone have any idea what's going on?
I'm running at 50J 450F.
That's just where I like the vape. I don't have it at the same setting with other juices and tanks. Just my current ADV in the Atlantis. I run my Subtank at 20J 380.
Have you experienced different with the Atlantis Ni coils?
I haven't used them in months, but when I tried them on the SX M, IIRC I had them around 30J and 450F, and that seemed OK. Not sure though.
I woudld tend to agree but I have been through a pack of the atlantis coils with no problems. Luccky to get 2 out of 5 with the kangers...
oh man they put the ce on it now. I hate that. makes it look like cheap Chinese imo. my sxm looks terrible but just does not quit. hit is the best to me. I will say this mod was worth every penny. paint failed but it is the function that counts amongst many a dead mod around here. it is pretty much all I use and I have over 60 mods including about 10 high end customs. you just can't go wrong with this one. sad to see the ce now though. cap certainly looks nice.
I found as long as you have the cap level it will catch no problem. of course sometimes getting it level is tricky. no big deal to me anymore. the overall function of the device eclipses any inherent quirks for me. I am not sure I even see a reason to purchase another mod now. especially not with the ce and trashcan on it now. if it ain't broken don't fix it!
I found as long as you have the cap level it will catch no problem. of course sometimes getting it level is tricky. no big deal to me anymore. the overall function of the device eclipses any inherent quirks for me. I am not sure I even see a reason to purchase another mod now. especially not with the ce and trashcan on it now. if it ain't broken don't fix it!
CE has always been on it, country of origin and recycle symbol. Have a look around your home plugs, switch's most small and large appliances you will be surprised at the number
.
Have to agree Its a Great Mod.
working great No paint problems still looks new!
.Have to agree Its a Great Mod.
working great No paint problems still looks new!
Last edited:
The CE and trashcan are on the M Class as well, not sure what you mean?
you know what? duh! all three of mine do have ce! that is what happens when you are 95. not kidding. I guess it does not matter to me then if I do not even know it is there lol.
I was wondering what is with these "newer" devices than 350j2,dna200? the innokin does not look like much of anything. 350j2 looks like it owns right now to me. I don't really need it though? as I just use ni.
btw, I am almost positive yihi is straight legit. however there have been many fake ce marks on electrical devices. funny that those very devices are the ones that tend to explode. even if Chinese only buy from legit sources I say. just trying to help.
I was wondering what is with these "newer" devices than 350j2,dna200? the innokin does not look like much of anything. 350j2 looks like it owns right now to me. I don't really need it though? as I just use ni.
btw, I am almost positive yihi is straight legit. however there have been many fake ce marks on electrical devices. funny that those very devices are the ones that tend to explode. even if Chinese only buy from legit sources I say. just trying to help.
Last edited by a moderator:
The CE mark has nothing to with the mod coming from China! It's a European conformity mark for safety etc.CE has always been on it, country of origin and recycle symbol. Have a look around your home plugs, switch's most small and large appliances you will be surprised at the number
Have to agree Its a Great Mod.
It's not always a safety, quality or mark of standards. It's common for Chinese companies to apply the symbol to their manufactured equipment. (perhaps an attempt to confuse)
https://en.wikipedia.org/wiki/CE_marking#China_Export
https://en.wikipedia.org/wiki/CE_marking
I was reading more about the ML and now they are saying it does Ni, Ti, SS, and Iron. Now the last two are vapable on any VW mod correct? I don't know anything about Iron except that I am low on it.
- Status
