SXmini M Class (TEMP CONTROL)

[Jake67]

I use super lube on all my mods. Excellent product.


Sent from my iPhone

 

[dannyben]

Hey does anyone have a silver and black one and is the silver like the face of the black and silver?

 

[KTMRider]

There's always 2 in every thread....

 

[jazzvaper]

Tapatalk insanity: cured by deletion!

 

[Thorpapa]

I add him to friend, he confirmed it. He like my comments nts under his photos, but no answer. He saw my message..

 

[TruSound]

Well that was entertaining for a minute, now back to our regularly scheduled programming.

If you like the silicone sleeve but not the sleeve creep use this, ultra sticky and same thickness as scotch tape so it won't add any bulk...I use this stuff all the time, your silicone will definitely stay put.

Amazon.com : Vapon Topstick 1" X 3 Yard Roll Tape Non Glare Lace Wig : Hairpieces : Beauty

 

[KTMRider]

Where's the best place to pick up a silicone sleeve?

 

[jazzvaper]

Where's the best place to pick up a silicone sleeve?

I bought two. One black one grey here:

Silicone Protective Sleeve for YiHi SXmini M Class - Ginger Vaper

 

[footbag]

For those rebuilding on these with Nickel, are you using 26g? How does it compare to 28g?

Anyone twisting Nickel with Kanthal? Trying to hit .06~ isn't so easy with 28g.

 

[PapaPro]

Guys, let's all have a group hug ok.

Vlad, just ignore Danny. Danny just ignore Vlad. Simples, as I am sure you are both great human beings. Ignore and move on. It really is getting boring. And through respect for each other and all this group. Please let the last guy have the last say and move on.

My M Class is sooo classy... No news from the pipe guy which is a real shame. I have been dreaming of a J chip pipe with a big battery. Anyone know of any good mod makers who make pipes with trhe J chip? That would make me sooo happy.

Anyway, sending some good energy out there people. London is so beautiful today it complements my M class so much

 

[dannyben]

@PapaPro Agreed. Thank you!

 

[KTMRider]

Mine's out for delivery

 

[PapaPro]

For those rebuilding on these with Nickel, are you using 26g? How does it compare to 28g?

Anyone twisting Nickel with Kanthal? Trying to hit .06~ isn't so easy with 28g.

I am using 26g hard Ni200 and like it. 2.5mm 5 wrap = 0.067 - 0.071 (around there) but I still need more testing to know the best single coil with the 26g. I did not like the 28g as it was too soft for me. But 26 seems perfect.

I am vaping between 13 and 25j. Ramp-up time is taking a few seconds and I like a 3-4 second vape. Higher power will shorten that time I am sure.

That's all I have my friend

 

[refuzeandrezizt]

For those rebuilding on these with Nickel, are you using 26g? How does it compare to 28g?

Anyone twisting Nickel with Kanthal? Trying to hit .06~ isn't so easy with 28g.

I use 28 gauge, and sometimes twisted 30 gauge. 5 or 6 wraps on a 3mm - 3.5mm shaft will get you right in the ballpark. It's the only thing I ever do in the Lemo Drop. Works like a charm.

Usually keep it set at 425-450 & 25-30 Joules.

 

[Heespharm]

Guys stop, you're making the babies cry


Sent from my iPhone using Tapatalk

 

[Lemwise]

I add him to friend, he confirmed it. He like my comments nts under his photos, but no answer. He saw my message..

He hasn't responded to me either. It seems he doesn't want our business. Not that it matters anymore because I found a leather guy nearby where I live. He's going to make a brown leather skin for me with a belt loop.

 

[JimScotty0]

For those rebuilding on these with Nickel, are you using 26g? How does it compare to 28g?

Anyone twisting Nickel with Kanthal? Trying to hit .06~ isn't so easy with 28g.

Yes, for several weeks now...

I have been using the same coil for about 10 days now changing wicks every 2-3 days and maybe 1x or 2x a day when I have let the device sit for an extended period I may set the resistance to see if there are any changes. I rarely see it go away from the .073 that it usually reads about 90% of the time. Sometimes if it is cooler or warmer than normal I might see it change to .072 or even more rare .074. Never anything more than that with my favorite coil so far using a twisted 26ga NI200 with a 30ga Kanthal A1, 3mm with 6/7 wraps on my Lemo 2 and my connections are very tight. I have had the same experience and resistance with 2 similar coils on the same Lemo 2 just prior to this current build. Now I would think with a prebuilt coil that has the wires pressed up against the pin with a rubber sleeve you might see more resistance variations but I don't see that with a build like the Lemo 2 and solid tight connections.

I vape a variety of ejuices using anything from 50/50 PG/VG to 100%VG so my temp settings do vary accordingly to give me the right warmth and flavor that I desire. My temp is usually between 385F to no more than 440F with my normal being around 400F. Today I checked the resistance in the morning and it was at .073. When I got home I re-wicked, juiced up and then after about 5 mins I checked the resistance again and it was at the same .073. I really don't see a need to recalibrate myself since I am mainly using the same atty and build. In either case, I always check after re-wicking or if I should change to another atty.

I did make about 10 of those same coils one after another with the same twisted wire so I would have a stash to use when needed. I use the same build on my Delta II and on my Kangertech Mini. The Lemo 2 seems to always give me right around the .073 but the Delta II around .079 and the Kanger Mini gives me around .059. Must be the atty's themselves having different resistances due to different metals, etc. causing a difference. Even the RBA's of the Kanger and the Delta are fairly consistent but not as rock solid that I get with the true RTA of the Lemo 2 which I tend to use the most.

I feel that as long as I calibrate the resistance with the atty attached and sitting on the SXM for at least 15 mins I will get repeatable performance and temp settings whether the device has been unused in my pocket for a while or quite cooler in the early morning sitting on my desk. As long as both the atty and mod are the same temp it all works the same for me. Now I haven't tried to do this outside in the winter or when in a very hot place such as in the open sun at the beach so I don't have experience with locking it with such extremes. But for my normal lifestyle in SoCal it works well for me.

 

[Thorpapa]

He hasn't responded to me either. It seems he doesn't want our business. Not that it matters anymore because I found a leather guy nearby where I live. He's going to make a brown leather skin for me with a belt loop.

It's sad I have a lot of friends in Hungary who has sx mini we wanna buy from him, but unfortunately he don't know how the business begins I think I rather ask a good pizza from him

 

[tchavei]

I know a few artists that know their trade very well but when suddently the demand rises, they don't know how to answer. Some just don't say anything and 'freeze'.

Since we are talking about hand made protection bags, I wouldn't be surprised this is indeed the case.

Pure speculation

Regards
Tony

Sent from my keyboard through my phone or something like that.

 

[2legsshrt]

Looks good, I ordered one.