Tank-O-Matic Liquinator v4.1

[Grammie]

I'm running my Provari w/2.0 Resurrector (the 2.0 comes from the Provari's readout), at 4.0. I could probably run it up some more (usually vape at 4.2 w/Boges) but it vapes great at 4.0!

Edited: I've only used 1 Resurrector so far, that's still going like a new carto!

 

[Chief-A-Lot]

Mine reads 1.7, both the ones I have in different tanks...

 

[Grammie]

I think there is a variance on the Resurrectors, 1.7 - 2.0. I either read that on CCV site or in his thread somewhere. I have a habit of turning down the voltage on the Provari any time I put on something different, carto or atty. I don't like "burning out" new carto's or atties!

 

[Chief-A-Lot]

Good call grammie I do the same thing.

 

[Grammie]

Just pop a few, either cartos or atties and you learn a lesson!

 

[eko824]

For those of you using the Resurrectors, do you find that they wick better than the Boge cartos? I'm having a problem getting dry hits on my Liquinator after 2 days of vaping (pre-slotted single coil Boges with 2 slots). I've got Boba's Bounty in there so I guess the thickness might be a problem.

Just switched it out for another Boge tonight so I'll see how that goes. I've got Resurrectors on the way.

 

[Chingas]

I haven't used Boges but do use Resurrectors.

Well, 1 resurrector. I am close to running an ounce through it and find that it wicks decently well. The 1 I am using only has 1 slot cut into it. I will try 2 slots next time. This juice is 30% VG from BWB.

With 1 slot I have found that it is good and easy to 'prime' the Resurrector. Doing a few fast and quick non-powered inhales will cause juice to be sucked into the carto from the tank. You know when you are making that happen when little bubbles rise up from the slot.

me drunk

 

[Chief-A-Lot]

For those of you using the Resurrectors, do you find that they wick better than the Boge cartos? I'm having a problem getting dry hits on my Liquinator after 2 days of vaping (pre-slotted single coil Boges with 2 slots). I've got Boba's Bounty in there so I guess the thickness might be a problem.

Just switched it out for another Boge tonight so I'll see how that goes. I've got Resurrectors on the way.

I did have the same issue using 555 from AVE. I switched to the punched method so I can control the size of the opening. It's Definetly helped out. I do find the the resurrectors wick better then the Boges. Bordering to well with thinner juices.

 

[eko824]

I did have the same issue using 555 from AVE. I switched to the punched method so I can control the size of the opening. It's Definetly helped out. I do find the the resurrectors wick better then the Boges. Bordering to well with thinner juices.

I've also got a jig & punch set from Vapor-Age on the way so I'm going to be punching my own as well. One thing that worries me is what Pete54 posted about only being able to punch small holes with the set. I guess I could try punching 3 or even 4 holes if that's the case.

 

[tyleris12]

I've also got a jig & punch set from Vapor-Age on the way so I'm going to be punching my own as well. One thing that worries me is what Pete54 posted about only being able to punch small holes with the set. I guess I could try punching 3 or even 4 holes if that's the case.

I'm sure if it's that small, two or three holes will work just fine. You'll just have to try it and see what ends up working best for you and your type of juices.

 

[Xaria]

I am having some flavor issues, that I seem to only get with my tank. I use a 3.7v device and 2.0 boge cartos with 80/20 PG. Vapor is great considering it's a low VG, and throat hit is very good, its just the flavor that has no taste. I have used the 2.0 stand alone without the tank and do get better flavor. Think I would have better luck with the 3.0 Boges?

 

[my4jewels]

If you're vaping at 3.7V, I don't think using a sr carto will help your flavor issue. Sr cartos are much better at higher voltages. I use an sr carto at around 4.5V-5V. If it's really buggin you, I'd recommend a VV device. That way, you can pretty much dial in your flavor until it's just right. You can get a very well made VV boxmod here: http://www.e-cigarette-forum.com/fo...oltage-evercool-quality-look-great-price.html. This is a beautiful little evercool VV mod, small, fit's nicely in your hand, and doesn't overheat. Or make the best from what you already have. Once you try VV, it's hard to vape with anything else. My hubby and I both have one of these, and they rock!

(Not affiliated in any way, just a happy customer).

 

[my4jewels]

Question: If I wanted to cut my own polycarbonate tubes for my 3ml liquinator tanks, where would I get it, what size? What would I cut it with and would the ends need to be filed?

 

[Big Fran]

Question: If I wanted to cut my own polycarbonate tubes for my 3ml liquinator tanks, where would I get it, what size? What would I cut it with and would the ends need to be filed?

I got an 8' long tube from US Plastics for about $10 The size is 3/4" OD and 5/8" ID

I was told a pipe cutter will cut it then you need to sand it smooth.

http://www.usplastic.com/catalog/item.aspx?itemid=35301&catid=704

 

[djrbx]

How long did it take for your tank to ship after ordering? I ordered mine a week ago and it still hasn't shipped. Anyone know? Thanks

 

[my4jewels]

I ordered mine on Monday, Aug. 28, and I got a shipping notice and tracking # the next day. I'm expecting them tomorrow or Saturday.

When I ordered the first time a couple of weeks ago, it took about 5 days to get them.

I'd give them a quick call on the phone.

How long did it take for your tank to ship after ordering? I ordered mine a week ago and it still hasn't shipped. Anyone know? Thanks

 

[djrbx]

I ordered mine on Monday, Aug. 28, and I got a shipping notice and tracking # the next day. I'm expecting them tomorrow or Saturday.

When I ordered the first time a couple of weeks ago, it took about 5 days to get them.

I'd give them a quick call on the phone.

Did you order the SS version or the regular version?

 

[my4jewels]

I got the delrin version. That's probably why yours is taking longer. I'd still call them and make sure.

Did you order the SS version or the regular version?

 

[djrbx]

I got the delrin version. That's probably why yours is taking longer. I'd still call them and make sure.

Thanks, I appreciate the help. I'll give them a call tomorrow since they're already closed for the day. In the meantime, I'm heading to the new store in e-cig store in Laguna Beach to get a DCT. I also have the GP-SSR to hold me off until I get my order. I'm just a little excited because I found out my Provari was already shipped which I ordered before the Liquinator. Kind of scratching my head since the Provari has a 3 week lead time and the Liquinator just says confirmed on my invoice.

 

[Chief-A-Lot]

Thanks, I appreciate the help. I'll give them a call tomorrow since they're already closed for the day. In the meantime, I'm heading to the new store in e-cig store in Laguna Beach to get a DCT. I also have the GP-SSR to hold me off until I get my order. I'm just a little excited because I found out my Provari was already shipped which I ordered before the Liquinator. Kind of scratching my head since the Provari has a 3 week lead time and the Liquinator just says confirmed on my invoice.

Awesome! You picked the killer combo!