If you don't like it after you tried it, I'll take it off your hands, at a small discount of course
.Tank-O-Matic Liquinator v4.1
- Thread starter Wylie
- Start date
- th_trl_thread_readers 0
- Status
If you don't like it after you tried it, I'll take it off your hands, at a small discount of course
.
Chief, can you give a bit more info on using a nail/hammer? One hole sufficient or do you really need 2 (one on each side). Any tips (size of nail) or warnings (damaging the carto) that you can share?
I'm all for the easiest way possible without crapping up the carto and if I don't have to go find/drag out the Dremel and find/buy a cutting wheel, all the better.
<-- Lazy girl (which is why I love this tank)
Called Vaporescence today, asked what the BFT is .. it's the width of the current phat tank but is taller than the current phat tank .. will hold 8-9ml.
Also got the following tip .. if your juice is very thick then 2 slots will probably work better than one but if you're using a dual carto then for sure only one slot.
Also got the following tip .. if your juice is very thick then 2 slots will probably work better than one but if you're using a dual carto then for sure only one slot.
I'm wondering the same thing. Glad we're both lazy.
I started using less juice then I got my loose tanks...spilled 3 ml in my truck, spilled 2 ml on my shirt and then spilled 3 ml on my paints. Now my tanks are all tight and I'm working back to even with the juice. No more tank sliding off.
Fran
I sometimes think I use more juice since I don't have to top it off. No reason to put it down.
cant wait to get one of these. I've been using lr boge since i started and the only concern i ever have is the neverending topping off. Looks like this is the way of the future!
They are the way to go. I still like to change flavors often so I have 3 liquinators. I just put different flavor in each one and change the whole tank when I change flavors,
So I took a couple of dual coil cartos to work today and used a very sharp nail to punch two holes in each of them. It's actually very easy to punch them out, you don't have to hit them hard at all. Was a little worried about having two holes in a dual, but just got home and put one in a tank and they work perfect...I couldn't be happier!!
I definetly use more juice with the tanks too...LOL!
I definetly use more juice with the tanks too...LOL!
Well, Chief hasn't replied yet, so I'll give my take.
I use the dremel to do the slots or use a 1/16" bit to do the hole.
I cut one slot or I drill 1 hole in my cartomizers, and they vape excellent.
I use a 1/16" bit and can hold the carto in one hand and drill with the other.
Need to get a sharp nail and do what tyler did...sounds easier.
Well, Chief hasn't replied yet, so I'll give my take.
I use the dremel to do the slots or use a 1/16" bit to do the hole.
I cut one slot or I drill 1 hole in my cartomizers, and they vape excellent.
I use a 1/16" bit and can hold the carto in one hand and drill with the other.
Need to get a sharp nail and do what tyler did...sounds easier.
It really is Rosco, took just a minute...had someone hold the carto for me on a hard surface, gave it a hard tap and all set.
Did not deform the carto or make it out of round at all. Trust me, if I can do it, anyone can...LOL!!
hmm...this is either a very close friend or a very stupid acquaintance. Personally, I would pass on that request.
"Okay just hold it right there...steady...steady... [wild look in tyler's eyes as he imagines the vaping pleasure]"
Last edited:
Actually, I'm a she...LOL!
And it was just one of the Maintenance guys I work with, who has known me for over 5 years and I guess trusts me pretty well.
I'm sure you can do it by yourself too, but just wanted someone there to make sure I didn't screw it up on my first try.
I spose you could use a crafting hole punch too if you found the right size. One of those ones they use for metal or leather work.
Anyone seen these? 15 C.C.V. Mega LR 1.7 Carto Deal (The Resurrectors)
I saw he had these in Stainless before and wonder if these would fit? "RESURRECTOR"
I saw he had these in Stainless before and wonder if these would fit? "RESURRECTOR"
I have some of those. I just cut one open to see what's inside and it appears to be built identical to a Boge only longer. It will fit a long tube perfectly. I'll throw one in and let you know how it goes.
Actually, I'm a she...LOL!
And it was just one of the Maintenance guys I work with, who has known me for over 5 years and I guess trusts me pretty well.
.... that. No offense but I would never trust a girl with a hammer. I don't care if she built the Eiffel tower by hand. =P just kidding!
Thanks ............... Let me know..... Is it stainless steel or did it have the sticker on it... CCV has a great deal on them!
I already had these before I got my LQ. They work just the same (had to take the label off mine though - will order stainless next time!). AND they give you an extra 1/2 inch to grab on to...
- Status
Similar threads
