The Phidias Woodimus Feedimus ONLY $110!!!!

Status
Not open for further replies.

Up In Vapor

Super Member
ECF Veteran
Oct 1, 2009
503
6
61
Knoxville, TN
cos,

If you have the 17670 battery for the xhaler you can use that one for 3.7 volts. In fact, I have the UltraFire 18650's and 17670's and the 17670's actually seem to fit better. The 18650 UltraFire was a bit TOO tall to fit in all the way. The AW IMR18650's are a little TOO short, but I can put a coin or magnet spacer in for them.
Yeah, I just got my Woody and I'm vaping some Drewbacco with the magnum atty at 3.7 volts on a 17670 TrustFire...Awesome!
 

Pete54

Ultra Member
ECF Veteran
Verified Member
Oct 30, 2009
2,637
3,412
Clearwater, Florida
Pete geez i screwed up then. grrrrrrr i meant to get the 4.5. so now when i get my woody on sat i cant use it. only batts i have now is the Tenergys 750 mah RCR 123A. Pete where can i get the 3.7v 18650? any place in the area? or the post you gave me last nite? I do not want to start using thhis at 6 volt. Now Up In Vapor posted not to use the new attys at 6 volts. so which should i use the reguler attys in 510 nor KR808 ir 801?
You can use the 5.2ohm atty with the 3v CR123's. When they come off the charger they are at about 3.7v and quickly die down to about 3.2v. So you'll start off at 9.4 watts and level off at about 7.5 watts. No problem! The 4.5's will just give it a bit more kick. I'm not aware of anywhere around us that sells rechargable lithium batts. Just order some online and go with the flow. If you're really in need I'll meet you and give you either a 18650 batt or a 4.5ohm atty. A friend in need is a friend in deed!
 

Up In Vapor

Super Member
ECF Veteran
Oct 1, 2009
503
6
61
Knoxville, TN
Update on battery info...I have the grey TrustFire 18650's and they are taller than my grey TrustFire 17670's...not making sense because 670's should be longer??? I also got a couple AW IMR 18650 LiMn batteries and they DO FIT...slightly loose but they do fit. I have a small magnetic battery spacer and this snugs it in there just right. The 3.0 volt Tenergy's fit fine for 6 volts too. I talked to Drew and he has TrustFire protected 18650's that are Blue color and his are not too long for the woody, LOL. Fonosmoak has the AW LiIon 18650's and they fit OK. Seems like some batteries are not meeting spec length correctly, but they are cheap and getting ones that fit should not be a problem.

Ed

P.S. I wish I had a wider assortment of 3.7v batteries, but I never thought I would WANT to vape at 3.7v again until I tried the magnum atty.
 
Last edited:

Pete54

Ultra Member
ECF Veteran
Verified Member
Oct 30, 2009
2,637
3,412
Clearwater, Florida
Oh I hope it shows today Pete! Thanks to you I had my batteries ordered and they showed today...along w/ the Woodimus :)

It's BEAUTIFUL!! Thanks to Drew & to Fonosmoak!!! I'm smitten with the wood :D




It feels very lonely out here in "I don't have my wood yet" land. Like everyone is having a party but I'm not allowed out! :( I guess I'll walk back over to the window now .....


OK ...I must be the last house in Pinellas County to get their freakin' mail!
 

Pete54

Ultra Member
ECF Veteran
Verified Member
Oct 30, 2009
2,637
3,412
Clearwater, Florida
mailman.jpg
 

Drewsworld

Resting In Peace
Mar 14, 2009
6,394
1,029
New Jersey
www.nhaler.com
Just a quick heads up on the batts...I have heard back from someone that had the Grey Ultrafire 18650s and they are too long for some reason...They run +/- .5 to 1 mm in size...I would highly reccomend just ordering either the A+W 18650 or the High Drain because Im sure they fit...Also the tenergy flat tops fit great too...The liquids are Menthol and Signature both 10Mg Octane HV...Thanks everyone for showing us your wood...I have some new products that will be unveiled at the Vapefest...Make sure you tune in if your not there!!!!
 

Conner

Full Member
Feb 13, 2010
67
0
Castle Rock
Good Lord those are mighty shiny looking little buggers. I've been using one of the wooden containers you can get get at "head shops" to store a shorty battery and cart when I'm on the go, and it crossed my mind how nice something like that would look as a vape unit. And here it is! :)

I think I might just have to pick one up on my 90 day smoke free anniversary.
 

cos

Ultra Member
ECF Veteran
Verified Member
Oct 22, 2009
2,215
497
St Petersburg Florida
Just a quick heads up on the batts...I have heard back from someone that had the Grey Ultrafire 18650s and they are too long for some reason...They run +/- .5 to 1 mm in size...I would highly reccomend just ordering either the A+W 18650 or the High Drain because Im sure they fit...Also the tenergy flat tops fit great too...The liquids are Menthol and Signature both 10Mg Octane HV...Thanks everyone for showing us your wood...I have some new products that will be unveiled at the Vapefest...Make sure you tune in if your not there!!!!

Drew and what batts are you going to be getting in next week as i want to order spares. are you going to have the high drain 18650. and spare attys as well. what charger can we use for the high drain aw 18650 anyway? i have a tenergy multifunctional charger that says 18650 but can it do the high drain as well?
 
Status
Not open for further replies.

Users who are viewing this thread