The Womper Woom, Womp it again Sam.

Status
Not open for further replies.

Lannie

Ultra Member
ECF Veteran
Verified Member
Jun 6, 2015
2,319
21,683
67
The windy plains of South Dakota
Well, I think this Fishbone Plus needs a new home. Any suggestions? The new home must contain at least one person with stronger hands than mine. I just broke the glass trying to get the blasted thing apart. I had to take it up to 65 watts :eek: on the Target to get a response from it, but I had some 3mg juice in it and it was WAY too harsh. So I figured it needed some zero nic. I let it cool off a bit, then tried to wriggle the glass off, but maybe it was still too warm because it cracked. I still have the spare glass for it if there's another person who's better at working these things than I am. I think there's just too much frustration in it for my bad hands to handle. If there are any suggestions, please PM me. :)

I'll try the little Stumpy for my rda. At least there's no glass on that, and I can get it apart. :rolleyes:
 

Sir Kadly

Tootle Wompin' Squonkaholic
ECF Veteran
Verified Member
  • Sep 18, 2015
    4,361
    50,684
    Michiana
    We got these batteries after reading the Mooch thing about which ones were good and which weren't. Dey be yaller.
    Sorry to hear about your struggles with the Fishbone.:( And with the cat.:D Can't help at all with the cat, I have the same problem. Can't really help with the Fishbone either, as I haven't tried one yet, though it's on my wishlist. Or maybe that should say Fishlist? The batteries though I suspect are LG HE4s. Not positive, but that'd be my first guess.
     

    LJFinFLA

    Vaping Master
    ECF Veteran
    Jul 9, 2014
    3,667
    25,604
    SW Florida
    Well, I think this Fishbone Plus needs a new home. Any suggestions? The new home must contain at least one person with stronger hands than mine. I just broke the glass trying to get the blasted thing apart. I had to take it up to 65 watts :eek: on the Target to get a response from it, but I had some 3mg juice in it and it was WAY too harsh. So I figured it needed some zero nic. I let it cool off a bit, then tried to wriggle the glass off, but maybe it was still too warm because it cracked. I still have the spare glass for it if there's another person who's better at working these things than I am. I think there's just too much frustration in it for my bad hands to handle. If there are any suggestions, please PM me. :)

    I'll try the little Stumpy for my RDA. At least there's no glass on that, and I can get it apart. :rolleyes:

    Don't give up on it so fast. Take the Claptons out of it and put in (2) 1.0ohm coils for your .5 build that you like. Maybe if you lube the o-rings with e-juice it will be easier to take off. Then if yo don't like it give it away.
     

    TrollDragon

    ECF Guru
    ECF Veteran
    Dec 3, 2014
    10,556
    57,665
    NS, Canada
    I'll try the little Stumpy for my RDA. At least there's no glass on that, and I can get it apart. :rolleyes:
    STUMPY!!1!!1!

    I Love my Stumpy! :w00t: :hubba:
    ligacjGh.jpg

    60W on that fused Clapton is a first class ticket to Flavor town!
    She holds 35 drops too!
     

    TrollDragon

    ECF Guru
    ECF Veteran
    Dec 3, 2014
    10,556
    57,665
    NS, Canada
    Well, I think this Fishbone Plus needs a new home. Any suggestions?

    Can't really help with the Fishbone either, as I haven't tried one yet, though it's on my wishlist. Or maybe that should say Fishlist?

    Looks like you have an answer right there. ;)
    This message will self destruct in 10 minutes...
     

    DingerCPA

    Vaping Mistress
    ECF Veteran
    Verified Member
    Apr 9, 2014
    9,020
    61,413
    Corn 'n' Cows
    @Lannie, I'd rolled a couple of clapton coils for my Velocity when I first got my Clapton wire. Can't remember what mod, but I just couldn't drive the lil buggers (none of my mods goes over 75W - all single-battery devices.) I finally just pulled out one of the claptons, and I had a very delightful vape. I think I ran that coil around 30W (I've slept since then)

    For the most part, I'm quite content with single-coil builds. Clapton or SS or Kanthal. It's just easier for *me*

    I've toyed with grabbing a +100W mod, but it's not my typical style. I don't see too much of dual claptons in my future :)
     

    DingerCPA

    Vaping Mistress
    ECF Veteran
    Verified Member
    Apr 9, 2014
    9,020
    61,413
    Corn 'n' Cows
    STUMPY!!1!!1!

    I Love my Stumpy! :w00t: :hubba:
    ligacjGh.jpg

    60W on that fused Clapton is a first class ticket to Flavor town!
    She holds 35 drops too!


    It is a DIVINE lil RDA. I have two more en route via slowboat (if the 2nd one ever "restocks") Between them and my velocities, I have sweet RDAs that are easy for me to build, have a decent sized juice well, and just plain WORK.

    However, I LOVE seeing how you set the coil IN THE MIDDLE. :facepalm: why the hellz haven't I thought to do that (especially after my dissertation to Lannie about not often building dual coils....)
     

    TrollDragon

    ECF Guru
    ECF Veteran
    Dec 3, 2014
    10,556
    57,665
    NS, Canada
    It is a DIVINE lil RDA. I have two more en route via slowboat (if the 2nd one ever "restocks") Between them and my velocities, I have sweet RDAs that are easy for me to build, have a decent sized juice well, and just plain WORK.

    However, I LOVE seeing how you set the coil IN THE MIDDLE. :facepalm: why the hellz haven't I thought to do that (especially after my dissertation to Lannie about not often building dual coils....)
    I'll have to try a Velocity one of these days.

    I can't take credit for the center mount coil my dear, it was the Rayonati Sloth from the Rayon Thread who I picked it up from. I run with two air holes open, put the cap back on lining up the closed third hole dead center of the post. :thumbs:
     

    Debadoo

    ECF Guru
    ECF Veteran
    Verified Member
    May 18, 2012
    18,052
    133,969
    Texas, near Fort Hood
    I am being ORDERED to stay put. :cry: Oh, and by the way, "Ow."
    one of the many reasons why I am NOT a cat person! :lol:

    I'll try the little Stumpy for my RDA. At least there's no glass on that, and I can get it apart. :rolleyes:
    I'd really love to try a BF stumpy or an O-16 would love to get a dual coil type vape from a single coil.
     

    TrollDragon

    ECF Guru
    ECF Veteran
    Dec 3, 2014
    10,556
    57,665
    NS, Canada
    one of the many reasons why I am NOT a cat person! :lol:


    I'd really love to try a BF stumpy or an O-16 would love to get a dual coil type vape from a single coil.
    The Origen 16 is on the TOP of my want list!
    maxresdefault.jpg

    The tank version would be sweet as well!
    origen-dripper-tiny-tank-by-norbert.jpg
     

    DingerCPA

    Vaping Mistress
    ECF Veteran
    Verified Member
    Apr 9, 2014
    9,020
    61,413
    Corn 'n' Cows
    I'll have to try a Velocity one of these days.

    I can't take credit for the center mount coil my dear, it was the Rayonati Sloth from the Rayon Thread who I picked it up from. I run with two air holes open, put the cap back on lining up the closed third hole dead center of the post. :thumbs:

    You might prefer the V-Mini to the full-sized one. Shorter topcap - a bit better flavor.

    You may not accept the credit, but you showed the pic, and for that I'm appreciative. I'll try that next time I throw a coil on there. Because the Velocities have dual holes on each post, I would be more prone to build dual coils on that one, rather than the Stumpy. I was looking at Low Pros from Mt. Oak, but I didn't bite. I do like the Stumpy for its sleek look (and looks awesome on my Pico :D )
     

    TrollDragon

    ECF Guru
    ECF Veteran
    Dec 3, 2014
    10,556
    57,665
    NS, Canada
    You might prefer the V-Mini to the full-sized one. Shorter topcap - a bit better flavor.

    You may not accept the credit, but you showed the pic, and for that I'm appreciative. I'll try that next time I throw a coil on there. Because the Velocities have dual holes on each post, I would be more prone to build dual coils on that one, rather than the Stumpy. I was looking at Low Pros from Mt. Oak, but I didn't bite. I do like the Stumpy for its sleek look (and looks awesome on my Pico :D )
    Thanks! I'll try the V-Mini on my next order and possibly a Low Pro too! I like the looks of that coil trapping setup.

    Seems like EVERYTHING looks awesome on the Pico. :D
    2dJfvu4h.jpg
     

    Debadoo

    ECF Guru
    ECF Veteran
    Verified Member
    May 18, 2012
    18,052
    133,969
    Texas, near Fort Hood
    The Origen 16 is on the TOP of my want list!
    not sure which I'd prefer, but definitely can't afford an O16......haven't even looked to see what stumpies run cuz I probably can't afford those either lol

    I need to go start supper, but I got a sweet sleepin lil puppy (he's 3 so not a puppy, but he'll always be a puppy to me) snuggled up next to me and I don't wanna move. awwwwwwww
     

    DingerCPA

    Vaping Mistress
    ECF Veteran
    Verified Member
    Apr 9, 2014
    9,020
    61,413
    Corn 'n' Cows
    not sure which I'd prefer, but definitely can't afford an O16......haven't even looked to see what stumpies run cuz I probably can't afford those either lol

    I need to go start supper, but I got a sweet sleepin lil puppy (he's 3 so not a puppy, but he'll always be a puppy to me) snuggled up next to me and I don't wanna move. awwwwwwww

    See, that's just like our cats :D
     

    Debadoo

    ECF Guru
    ECF Veteran
    Verified Member
    May 18, 2012
    18,052
    133,969
    Texas, near Fort Hood
    See, that's just like our cats :D
    he's got a couple cat like behaviors......but that's as much as I can handle. Mostly he's all sweet puppy dog.........cept for those times when he remembers he's a terrier, and becomes a terrier-ist!!

    Ok........I may check back later, but I really gotta do sumpthin bout supper, I'm starvin! lol Have a good night y'all!
     
    Status
    Not open for further replies.

    Users who are viewing this thread