Tilemahos new rebuildable part (springomizer)
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
What do you mean it doesn't always work on TC devices? And do you know why?
its because TC requires VERY steady connections Seek. Even on Tilemahos, if the bolts that keep wires are very little loοse, the TC will not work. For example, if resistance change at 0,2 ohm, the TC will measure a much different temperature.
When I say that it doesnt work, I mean that it doesnt work for my standards. Just try it and tell me your results.
When I say that it doesnt work, I mean that it doesnt work for my standards. Just try it and tell me your results.
Last edited:
Been using mine on a Dicodes Dani Extreme v2+ with temp control and it has worked without issue since November when I got the Dicodes mod.
I can report the same succes on the same german chip
Hey there,
I use the housing of the Tilemahos 2 plus for the Springomizer, thanks for that suggestion. I have it @ 0.8 Ohms right now and the Juice (70/30) has a flavour, I would never believed possible. Thanks Imeo for that device it's absolutly easy to wick.
I have it on an evic VTC mini (3.0), the TC on the SS316 profile works, but it's not perfect. I tried a manual input (105), but that seems very wrong, had an early dry hit, while the TC showed around 150°C. Does anyone have a profile for the VTC mine, that is working for you?
Thanks in advance and have a nice Sunday @ all.
Ron
I use the housing of the Tilemahos 2 plus for the Springomizer, thanks for that suggestion. I have it @ 0.8 Ohms right now and the Juice (70/30) has a flavour, I would never believed possible. Thanks Imeo for that device it's absolutly easy to wick.
I have it on an evic VTC mini (3.0), the TC on the SS316 profile works, but it's not perfect. I tried a manual input (105), but that seems very wrong, had an early dry hit, while the TC showed around 150°C. Does anyone have a profile for the VTC mine, that is working for you?
Thanks in advance and have a nice Sunday @ all.
Ron
Be well Ron, thank you buddy
I suggest you to put down the manual 105 input (if the device supports it). Put it at 85
I suggest you to put down the manual 105 input (if the device supports it). Put it at 85
Hey Imeo,
thank you for the input - the vtc mini supports input from 1 to 1000. But it's not working smooth. I'll stay @ VW right now, will experiment a little next weekend.
Bye and be well!
thank you for the input - the vtc mini supports input from 1 to 1000. But it's not working smooth. I'll stay @ VW right now, will experiment a little next weekend.
Bye and be well!
Last edited:
And..... my comment about this presentation will be a rhetorical question.
How much more beautiful our "vape world" would be... if every reviewer was available to lose 10 minutes of his life to talk with the manufacturer before the presentation?
Not a bad review. Pete/Phil(lol) is kind of "nit-picky" but that's good in a way. Don't know why he didn't use the SS spring and why he puts the cotton down the channels.
Also, I never had any issues filling the Tilemahos like he shows, I'm not saying it can't happen, but it's never happened to me
But again, all in all it's not a bad review and he seems to genuinely like it!
Also, I never had any issues filling the Tilemahos like he shows, I'm not saying it can't happen, but it's never happened to me
But again, all in all it's not a bad review and he seems to genuinely like it!
Last edited:
I agree that it's not a bad review Mr zoso but the way he puts the cotton all the way down to the channels is the absolute definition of a "no-feeding" Tilemahos.
I wonder how he got good taste from this set up.
That's why I meant that he could contact with imeo before making this video.
He is an well known reviewer and he could avoid mistakes.. by spending some minutes in Skype
I wonder how he got good taste from this set up.
That's why I meant that he could contact with imeo before making this video.
He is an well known reviewer and he could avoid mistakes.. by spending some minutes in Skype
He talked to me enough times Stelios. He simply didnt see my videos. I understand that because he has a lot of devices to review, thats why I post on youtube all the necessary corrections so he will be able to enjoy Tilemahos as much as he can. In fact all the thumbs down were small mistakes that he did. Small mistakes that make the big differences.
But he said the best words for GG line and Tilemahos is his favorite atomizer, so all the rest can be fixed easily.
He just kept Tilemahos in the opposite angle Mr. Maybe he is used to refill like thatNot a bad review. Pete/Phil(lol) is kind of "nit-picky" but that's good in a way. Don't know why he didn't use the SS spring and why he puts the cotton down the channels.
Also, I never had any issues filling the Tilemahos like he shows, I'm not saying it can't happen, but it's never happened to me
But again, all in all it's not a bad review and he seems to genuinely like it!
Imeo, if you can follow up with him and tell him about these mistakes because he does a follow up on his site and sometimes he mentions the corrections in another video. So make sure he gets the message.
It happens with me so I changed the bottle. I use longer tips ones now. But i use 99%VG so it's not the atty fault lol.
I did Aal. And it seems that he take seriously all people that post on his channel and he also answers to all comments. It reminds me of someone lol
By the way, a guy there said that Tilemahos is expensive. That was the only post that made me laugh
I'm thinking in a kind ceramic (or other material) element, with a pre path made for the wire, so to rebuild it, you just have "unplug" the element, remove the coil by pulling it from one side and insert the new wire, the new wire will follow the path to the other end, then, you just have to insert the element in its place (like a socket connection of a car fuse), as it has two "legs" (+ and -), and each end of the wire will be connected to one "leg".
Wick will be very easy to insert through the element, since as the element is a solid piece, it will not be prone to deformations.
The stainless steel wire, will provide a fast heating time / response time.
Have I gone cuckoo?
It looks exactly as I described, doesn't it?
- Status
