Howdy,
So I received from someone in my circle of friends a SilverPlay RTA, I wasn't too sure with the lack of reviews but lets say blown away. lets start with technical.
Material
Stainless Steel, Quartz Glass and Copper (center post only)
Build Deck
Split center post for ease of building. Post screws are Phillips somewhere between #0 and #1 size.
Generous channels for juice flow
3mm holes on either side under coils for airflow
Small cut outs in deck to fan wicking in to (this is a primarily cotton or rayon atomizer and is built for it).
Accepts most Kayfun and Russian 91% parts for a unique build possibility
Bottom fill screw (Tapered so no o-ring needed for seal)
Atomizer build quality
Amazing, threads are buttery smooth right out of the box (speaking of box it is an amazingly presented atomizer for the price). Nothing is mis-aligned upon expecting although factory tightening may require some oomph to separate it at first. This atomizer holds 3ml of liquid at full which can either be good or bad. Stainless steel and glass tank system to hold those tank cracker juices. Engravings are well done and clean as can be as well as the lines overall.
Price point: 40$
Impressions
I'm running this atomizer at an 11 wrap 26 gauge build @ .5 ohm on this and 25 watts of heat using rayon as the wicking, it keeps up with ease without any gurgling and no spill over on to the deck if wicked properly and using the cut out groves for the cotton to sit in (a little in the channels won't hurt as they are large enough to allow efficent wicking). The tank drys up quickly as this is a duel coil atomizer so it will drink up the liquid without even skipping a beat keeping up with whatever heat you want to put on it. The chimney separates in to 2 parts which will most def. make anyone who built a kayfun or Russian right at home with it. something I learned with this atomizer is ensure that you use the left most hole on the center post to allow the coil to line up over the air hole. Installation of the coil was as straight forward and easy as it gets when it comes to the build of it, don't be put off at the descent of the negative posts as everything somehow lines up without issues to my surprise.
Vapor production and flavor is off the charts, I can't really compare it to any RTA out there on the market at current (and the goblin is limited availability). This thing chucks vapor and flavor together full bore without even missing a beat in truth, the chimney is a bit of a reason why the liquid tank is only 3ml but given that little but of an issue should not put anyone off from giving this atomizer a go. Please do keep in mind this is an advanced build atomizer and is not for someone new in to the RTA market, it will take some caution to not short the coils out on the chimney of this and some care needs to be taken there of but once your comfortable with not doing that (or ask a friend to build it out) you won't put it down. I'd compare this vaping experience to what my Mutation X v2 can put out.
Overall there is no reason not to pick this atomizer up, it keeps on giving and giving without skipping a beat and the flavor is right there on top draw after draw. Some of those juices you may have forgotten may get new life once again in this puppy.
Rating: 8/10
Cons
3mL Liquid capacity
Height of the atomizer itself is a bit taller then I'd expect (its larger then the goblin from a side by side I found)
No "All Glass" option available from the start for tank (could be resolved by offering a retainer ring for the bottom for the glass)
So I received from someone in my circle of friends a SilverPlay RTA, I wasn't too sure with the lack of reviews but lets say blown away. lets start with technical.
Material
Stainless Steel, Quartz Glass and Copper (center post only)
Build Deck
Split center post for ease of building. Post screws are Phillips somewhere between #0 and #1 size.
Generous channels for juice flow
3mm holes on either side under coils for airflow
Small cut outs in deck to fan wicking in to (this is a primarily cotton or rayon atomizer and is built for it).
Accepts most Kayfun and Russian 91% parts for a unique build possibility
Bottom fill screw (Tapered so no o-ring needed for seal)
Atomizer build quality
Amazing, threads are buttery smooth right out of the box (speaking of box it is an amazingly presented atomizer for the price). Nothing is mis-aligned upon expecting although factory tightening may require some oomph to separate it at first. This atomizer holds 3ml of liquid at full which can either be good or bad. Stainless steel and glass tank system to hold those tank cracker juices. Engravings are well done and clean as can be as well as the lines overall.
Price point: 40$
Impressions
I'm running this atomizer at an 11 wrap 26 gauge build @ .5 ohm on this and 25 watts of heat using rayon as the wicking, it keeps up with ease without any gurgling and no spill over on to the deck if wicked properly and using the cut out groves for the cotton to sit in (a little in the channels won't hurt as they are large enough to allow efficent wicking). The tank drys up quickly as this is a duel coil atomizer so it will drink up the liquid without even skipping a beat keeping up with whatever heat you want to put on it. The chimney separates in to 2 parts which will most def. make anyone who built a kayfun or Russian right at home with it. something I learned with this atomizer is ensure that you use the left most hole on the center post to allow the coil to line up over the air hole. Installation of the coil was as straight forward and easy as it gets when it comes to the build of it, don't be put off at the descent of the negative posts as everything somehow lines up without issues to my surprise.
Vapor production and flavor is off the charts, I can't really compare it to any RTA out there on the market at current (and the goblin is limited availability). This thing chucks vapor and flavor together full bore without even missing a beat in truth, the chimney is a bit of a reason why the liquid tank is only 3ml but given that little but of an issue should not put anyone off from giving this atomizer a go. Please do keep in mind this is an advanced build atomizer and is not for someone new in to the RTA market, it will take some caution to not short the coils out on the chimney of this and some care needs to be taken there of but once your comfortable with not doing that (or ask a friend to build it out) you won't put it down. I'd compare this vaping experience to what my Mutation X v2 can put out.
Overall there is no reason not to pick this atomizer up, it keeps on giving and giving without skipping a beat and the flavor is right there on top draw after draw. Some of those juices you may have forgotten may get new life once again in this puppy.
Rating: 8/10
Cons
3mL Liquid capacity
Height of the atomizer itself is a bit taller then I'd expect (its larger then the goblin from a side by side I found)
No "All Glass" option available from the start for tank (could be resolved by offering a retainer ring for the bottom for the glass)
Last edited: